Dentistry - Coupling dimensions for handpiece connectors - Amendment 1: Interface dimensions (ISO 3964:2016/Amd 1:2018)

This International Standard specifies the coupling between handpieces and motors connected to
dental units.
This International Standard specifies the nominal dimensions, tolerances and the extraction force of
coupling systems for use between handpiece and motor which supply the handpiece with water, air and
light and rotation energy.

Zahnheilkunde - Kupplungsmaße für Handstückverbindungen - Änderung 1 (ISO 3964:2016/Amd 1:2018)

Médecine bucco-dentaire - Dimensions d'accouplement pour pièces à main dentaires - Amendement 1 (ISO 3964:2016/Amd 1:2018)

Zobozdravstvo - Priključne mere za priključke za vrteče se zobne pripomočke - Dopolnilo A1: Mere vmesnika (ISO 3964:2016/Amd 1:2018)

Ta mednarodni standard določa priključke med vrtečimi se zobnimi pripomočki in motorji, ki so povezani z dentalnimi enotami.
Ta mednarodni standard določa nominalne mere, odstopanja in ekstrakcijsko silo priključnih sistemov za uporabo med vrtečim se zobnim pripomočkom in motorjem, ki zobni pripomoček oskrbuje z vodo, zrakom, svetlobo in rotacijsko energijo.

General Information

Status
Published
Public Enquiry End Date
03-Jul-2019
Publication Date
28-Oct-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Oct-2019
Due Date
21-Dec-2019
Completion Date
29-Oct-2019

Relations

Buy Standard

Amendment
EN ISO 3964:2017/A1:2019
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN ISO 3964:2017/oprA1:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3964:2017/A1:2019
01-december-2019
Zobozdravstvo - Priključne mere za priključke za vrteče se zobne pripomočke -
Dopolnilo A1: Mere vmesnika (ISO 3964:2016/Amd 1:2018)
Dentistry - Coupling dimensions for handpiece connectors - Amendment 1: Interface
dimensions (ISO 3964:2016/Amd 1:2018)
Zahnheilkunde - Kupplungsmaße für Handstückverbindungen - Änderung 1 (ISO
3964:2016/Amd 1:2018)
Médecine bucco-dentaire - Dimensions d'accouplement pour pièces à main dentaires -
Amendement 1 (ISO 3964:2016/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 3964:2016/A1:2019
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 3964:2017/A1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3964:2017/A1:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 3964:2017/A1:2019


EN ISO 3964:2016/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2019
EUROPÄISCHE NORM
ICS 11.060.25
English Version

Dentistry - Coupling dimensions for handpiece connectors
- Amendment 1: Interface dimensions (ISO
3964:2016/Amd 1:2018)
Médecine bucco-dentaire - Dimensions d'accouplement Zahnheilkunde - Kupplungsmaße für
pour pièces à main dentaires - Amendement 1 (ISO Handstückverbindungen - Änderung 1 (ISO
3964:2016/Amd 1:2018) 3964:2016/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 3964:2016; it was approved by CEN on 5 August 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3964:2016/A1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 3964:2017/A1:2019
EN ISO 3964:2016/A1:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 3964:2017/A1:2019
EN ISO 3964:2016/A1:2019 (E)
European foreword
The text of ISO 3964:2016/Amd 1:2018 has been prepared by Technical Committee ISO/TC 106
"Dentistry” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 3964:2016/A1:2019 by Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3964:2016/Amd 1:2018 has been approved by CEN as EN ISO 3964:2016/A1:2019
without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 3964:2017/A1:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 396
...

SLOVENSKI STANDARD
SIST EN ISO 3964:2017/oprA1:2019
01-julij-2019
Zobozdravstvo - Priključne mere za priključke za vrteče se zobne pripomočke -
Dopolnilo A1: Mere vmesnika (ISO 3964:2016/Amd 1:2018)
Dentistry - Coupling dimensions for handpiece connectors - Amendment 1: Interface
dimensions (ISO 3964:2016/Amd 1:2018)
Zahnheilkunde - Kupplungsmaße für Handstückverbindungen - Änderung 1 (ISO
3964:2016/Amd 1:2018)
Médecine bucco-dentaire - Dimensions d'accouplement pour pièces à main dentaires -
Amendement 1 (ISO 3964:2016/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 3964:2016/prA1
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 3964:2017/oprA1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3964:2017/oprA1:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 3964:2017/oprA1:2019
INTERNATIONAL ISO
STANDARD 3964
Third edition
2016-11-01
AMENDMENT 1
2018-06
Dentistry — Coupling dimensions for
handpiece connectors
AMENDMENT 1
Médecine bucco-dentaire — Dimensions d'accouplement pour pièces
à main dentaires
AMENDEMENT 1
Reference number
ISO 3964:2016/Amd.1:2018(E)
©
ISO 2018

---------------------- Page: 3 ----------------------

SIST EN ISO 3964:2017/oprA1:2019
ISO 3964:2016/Amd.1:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------

SIST EN ISO 3964:2017/oprA1:2019
ISO 3964:2016/Amd.1:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.