Windows - Classification of mechanical properties - Racking, torsion and operating forces

This document provides a means of classifying the performance of opening windows according to their strength in resisting, where appropriate, racking load, static torsion and their operating forces. Special aspects such as those of burglar resistance are not covered.

Fenster - Klassifizierung mechanischer Eigenschaften - Vertikallasten, Verwindung und Bedienkräfte

Dieses Dokument ist ein Hilfsmittel zur Klassifizierung des Leistungsvermögens von zu öffnenden Fenstern nach deren Widerstandsfähigkeit gegen, falls zutreffend, Vertikallasten (Verschiebung), statische Verwindung und Bedienkräfte. Besondere Aspekte, wie Einbruchhemmung, werden nicht behandelt.

Fenêtres - Classification des propriétés mécaniques - Charge verticale, torsion et efforts de manoeuvre

Le présent document définit un moyen de classer la performance des fenêtres ouvrantes en fonction de leur résistance, lorsque cela est approprié, à un effort dû au contreventement, à une torsion statique et de leurs efforts de manœuvre. Certains aspects, tels que ceux traitant de la résistance à l'effraction, ne sont pas couverts.

Okna - Klasifikacija mehanskih lastnosti - Navpične obremenitve, torzija in sile pri uporabi

General Information

Status
Published
Public Enquiry End Date
19-Jun-2018
Publication Date
07-Sep-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Sep-2020
Due Date
08-Nov-2020
Completion Date
08-Sep-2020

Relations

Buy Standard

Standard
EN 13115:2020
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13115:2018
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13115:2020
01-oktober-2020
Nadomešča:
SIST EN 13115:2002
Okna - Klasifikacija mehanskih lastnosti - Navpične obremenitve, torzija in sile pri
uporabi
Windows - Classification of mechanical properties - Racking, torsion and operating
forces
Fenster - Klassifizierung mechanischer Eigenschaften - Vertikallasten, Verwindung und
Bedienkräfte
Fenêtres - Classification des propriétés mécaniques - Charge verticale, torsion et efforts
de manoeuvre
Ta slovenski standard je istoveten z: EN 13115:2020
ICS:
91.060.50 Vrata in okna Doors and windows
SIST EN 13115:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13115:2020

---------------------- Page: 2 ----------------------
SIST EN 13115:2020


EN 13115
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 91.060.50 Supersedes EN 13115:2001
English Version

Windows - Classification of mechanical properties -
Racking, torsion and operating forces
Fenêtres - Classification des propriétés mécaniques - Fenster - Klassifizierung mechanischer Eigenschaften -
Charge verticale, torsion et efforts de manoeuvre Vertikallasten, Verwindung und Bedienkräfte
This European Standard was approved by CEN on 19 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13115:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13115:2020
EN 13115:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Classification criteria . 4
4.1 General . 4
4.2 Operating forces . 4
4.3 Racking and static torsion . 6
4.3.1 Resistance to racking load . 6
4.3.2 Resistance to static torsion . 6
4.3.3 Classification for racking and static torsion . 6

2

---------------------- Page: 4 ----------------------
SIST EN 13115:2020
EN 13115:2020 (E)
European foreword
This document (EN 13115:2020) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2021, and conflicting national standards
shall be withdrawn at the latest by February 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13115:2001.
This documen
...

SLOVENSKI STANDARD
oSIST prEN 13115:2018
01-junij-2018
2NQD.ODVLILNDFLMDPHKDQVNLKODVWQRVWL1DYSLþQHREUHPHQLWYHWRU]LMDLQVLOHSUL
XSRUDEL
Windows - Classification of mechanical properties - Racking, torsion and operating
forces
Fenster - Klassifizierung mechanischer Eigenschaften - Vertikallasten, Verwindung und
Bedienkräfte
Fenêtres - Classification des propriétés mécaniques - Charge verticale, torsion et efforts
de manoeuvre
Ta slovenski standard je istoveten z: prEN 13115
ICS:
91.060.50 Vrata in okna Doors and windows
oSIST prEN 13115:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13115:2018

---------------------- Page: 2 ----------------------
oSIST prEN 13115:2018


DRAFT
EUROPEAN STANDARD
prEN 13115
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2018
ICS 91.060.50 Will supersede EN 13115:2001
English Version

Windows - Classification of mechanical properties -
Racking, torsion and operating forces
Fenêtres - Classification des propriétés mécaniques - Fenster - Klassifizierung mechanischer Eigenschaften -
Charge verticale, torsion et efforts de manoeuvre Vertikallasten, Verwindung und Bedienkräfte
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13115:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13115:2018
prEN 13115:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Classification criteria . 4
4.1 General . 4
4.2 Operating forces . 4
4.3 Resistance to racking load . 5
4.4 Resistance to static torsion . 5
5 Classification . 5
Bibliography . 6

2

---------------------- Page: 4 -------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.