Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D ≤ 10 mm

This document specifies the requirements relating to: Heat resisting nickel base alloy Ni-P96-HT Cold drawn and precipitation treated Wire D ≤ 10 mm for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Nickelbasislegierung Ni-P96-HT - Kaltgezogen und Ausgelagert - Draht D ≤ 10 mm

Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Nickelbasislegierung Ni-P96-HT
Kaltgezogen und ausgehärtet
Draht
D ≤ 10 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud à base de nickel Ni-P96-HT - Écroui et précipité - Fils D ≤ 10 mm

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud à base de nickel Ni-P96-HT
Étiré à froid et précipité
Fil
D ≤ 10 mm
pour applications aérospatiales.

Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni-P96-HT - Hladno vlečene in izločevalno utrjene - Žice D ≤ 10 mm

Ta dokument določa zahteve, ki se navezujejo na: toplotno odporne zlitine na nikljevi osnovi Ni-P96-HT, hladno vlečene in izločevalno utrjene, žice, D ≤ 10 mm, za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
11-Dec-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Dec-2019
Due Date
10-Feb-2020
Completion Date
12-Dec-2019

Buy Standard

Standard
EN 2400:2020
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2400:2020
01-februar-2020
Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni-P96-HT - Hladno
vlečene in izločevalno utrjene - Žice D ≤ 10 mm
Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and
precipitation treated - Wires D ≤ 10 mm
Luft- und Raumfahrt - Hochwarmfeste Nickelbasislegierung Ni-P96-HT - Kaltgezogen
und Ausgelagert - Draht D ≤ 10 mm
Série aérospatiale - Alliage résistant à chaud à base de nickel Ni-P96-HT - Écroui et
précipité - Fils D ≤ 10 mm
Ta slovenski standard je istoveten z: EN 2400:2019
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST EN 2400:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2400:2020

---------------------- Page: 2 ----------------------
SIST EN 2400:2020


EN 2400
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 49.025.15
English Version

Aerospace series - Heat resisting nickel base alloy NI-P96-
HT - Cold drawn and precipitation treated - Wire - D ≤ 10
mm
Série aérospatiale - Alliage résistant à chaud à base de Luft- und Raumfahrt - Hochwarmfeste
nickel NI-P96-HT - Étiré à froid et précipité - Fil - D ≤ Nickelbasislegierung NI-P96-HT - Kaltgezogen und
10 mm ausgehärtet - Draht - D ≤ 10 mm
This European Standard was approved by CEN on 8 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2400:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2400:2020
EN 2400:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 2400:2020
EN 2400:2019 (E)
European foreword
This document (EN 2400:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2020, and conflicting national standards shall be
withdrawn at the latest by May 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the nation
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.