Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings

Part 1-1 gives generic detailed strength rules which are applicable to steel structures in general. Their use and any limits of applicability are explained in the text where necessary. It does not cover resistance to fire; particular aspects of special types of buildings and civil engineering works (e.g. bridges, masts, silos, piling or off-shore structures).

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-1: Allgemeine Bemessungsregeln und Regeln für den Hochbau

(1)   Eurocode 3 gilt für den Entwurf, die Berechnung und die Bemessung von Bauwerken aus Stahl. Eurocode 3 entspricht den Grundsätzen und Anforderungen an die Tragfähigkeit und Gebrauchstauglichkeit von Tragwerken sowie den Grundlagen für ihre Bemessung und Nachweise, die in EN 1990, Grundlagen der Tragwerksplanung, enthalten sind.
(2)   Eurocode 3 behandelt ausschließlich Anforderungen an die Tragfähigkeit, die Gebrauchstauglichkeit, die Dauerhaftigkeit und den Feuerwiderstand von Tragwerken aus Stahl. Andere Anforderungen, wie z. B. Wärmeschutz oder Schallschutz, werden nicht berücksichtigt.
(3)   Eurocode 3 gilt in Verbindung mit folgenden Regelwerken:
-   EN 1990,  Grundlagen der Tragwerksplanung;
-   EN 1991,  Einwirkungen auf Tragwerke;
-   ENs, ETAGs und ETAs für Bauprodukte, die für Stahlbauten Verwendung finden;
-   EN 1090,  Herstellung und Errichtung von Stahlbauten - Technische Anforderungen;
-   EN 1992 bis EN 1999, soweit auf Stahltragwerke oder Stahlbaukomponenten Bezug genommen wird.
(4)   Eurocode 3 ist in folgende Teile unterteilt:
EN 1993-1,  Bemessung und Konstruktion von Stahlbauten - Allgemeine Bemessungsregeln und Regeln für den Hochbau;
EN 1993-2,  Bemessung und Konstruktion von Stahlbauten - Teil 2: Stahlbrücken;
EN 1993-3,  Bemessung und Konstruktion von Stahlbauten - Teil 3: Türme, Maste und Schornsteine;
EN 1993-4,  Bemessung und Konstruktion von Stahlbauten - Teil 4: Tank- und Silobauwerke und Rohrleitungen;
EN 1993-5,  Bemessung und Konstruktion von Stahlbauten - Teil 5: Spundwände und Pfähle aus Stahl;
EN 1993-6,  Bemessung und Konstruktion von Stahlbauten - Teil 6: Kranbahnträger.

Eurocode 3: Calcul des structures en acier - Partie 1-1: Règles générales et règles pour les bâtiments

Après la mise en oeuvre de tous les changements, il conviendra de mettre à jour le Sommaire, tout en s'assurant que la nouvelle Annexe C apparaît correctement, (voir ci-dessous).

Evrokod 3: Projektiranje jeklenih konstrukcij - 1-1. del: Splošna pravila in pravila za stavbe

Področje uporabe 1-1. dela evrokoda 3
(1)EN 1993-1-1 navaja osnovna pravila projektiranja za jeklene konstrukcije z debelino materiala
t  3 mm. Prav tako navaja dodatna pravila za projektiranje jeklenih stavb. Ta dodatna pravila so označena s črko “B”, ki sledi številki odstavka: (  )B.
OPOMBA:Za hladno oblikovane tankostenske elemente z debelino t < 3 mm glej EN 1993-1-3.
(2)   EN 1993-1-1 vsebuje naslednja poglavja:
1   Splošno
2   Osnove projektiranja
3   Materiali
4   Trajnost
5   Analiza konstrukcij
6   Mejna stanja nosilnosti
7   Mejna stanja uporabnosti
(3)Poglavji 1 in 2 vsebujeta dodatna pravila k pravilom, navedenim v EN 1990 “Osnove projektiranja konstrukcij”.
(4)Poglavje 3 obravnava lastnosti materiala za proizvode iz malo legiranih konstrukcijskih jekel.
(5)Poglavje 4 podaja splošna pravila za trajnost.
(6)Poglavje 5 se nanaša na analizo konstrukcij, pri kateri je mogoče z dovolj veliko natančnostjo pri globalni analizi elemente modelirati z linijskimi elementi.
(7)V poglavju 6 so navedena podrobna pravila za projektiranje prečnih prerezov in elementov.
(8)V poglavju 7 so navedena pravila za uporabnost.

General Information

Status
Published
Public Enquiry End Date
30-Mar-2013
Publication Date
30-Jun-2014
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-May-2014
Due Date
24-Jul-2014
Completion Date
01-Jul-2014

Relations

Buy Standard

Amendment
EN 1993-1-1:2005/A1:2014
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN 1993-1-1:2005/kFprA1:2013
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1993-1-1:2005/A1:2014
01-julij-2014
Evrokod 3: Projektiranje jeklenih konstrukcij - 1-1. del: Splošna pravila in pravila
za stavbe
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-1: Allgemeine
Bemessungsregeln und Regeln für den Hochbau
Eurocode 3: Calcul des structures en acier - Partie 1-1: Règles générales et règles pour
les bâtiments
Ta slovenski standard je istoveten z: EN 1993-1-1:2005/A1:2014
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
91.080.10 Kovinske konstrukcije Metal structures
SIST EN 1993-1-1:2005/A1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1993-1-1:2005/A1:2014

---------------------- Page: 2 ----------------------

SIST EN 1993-1-1:2005/A1:2014

EUROPEAN STANDARD
EN 1993-1-1:2005/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2014
ICS 91.010.30; 91.080.10
English Version
Eurocode 3: Design of steel structures - Part 1-1: General rules
and rules for buildings
Eurocode 3: Calcul des structures en acier - Partie 1-1: Eurocode 3: Bemessung und Konstruktion von Stahlbauten
Règles générales et règles pour les bâtiments - Teil 1-1: Allgemeine Bemessungsregeln und Regeln für
den Hochbau
This amendment A1 modifies the European Standard EN 1993-1-1:2005; it was approved by CEN on 6 March 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1993-1-1:2005/A1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1993-1-1:2005/A1:2014
EN 1993-1-1:2005/A1:2014 (E)
Contents Page
Foreword .3
1 Modification to the Contents .4
2 Modification to the Foreword .4
3 Modification to 1.1.1 .4
4 Modification to 2.1.2 .4
5 Addition of a new Annex C .4

2

---------------------- Page: 4 ----------------------

SIST EN 1993-1-1:2005/A1:2014
EN 1993-1-1:2005/A1:2014 (E)
Foreword
This document (EN 1993-1-1:2005/A1:2014) has been prepared by Technical Committee CEN/TC 250
“Structural Eurocodes”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 1993-1-1:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2015, and
conflicting national standards shall be withdrawn at the latest by May 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 1993-1-1:2005/A1:2014
EN 1993-1-1:2005/A1:2014 (E)
1 Modification to the Contents
After implementing all the changes, please regenerate the whole table of Contents while making sure that the
new Annex C
...

SLOVENSKI STANDARD
SIST EN 1993-1-1:2005/kFprA1:2013
01-marec-2013
Evrokod 3: Projektiranje jeklenih konstrukcij - 1-1. del: Splošna pravila in pravila
za stavbe
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-1: Allgemeine
Bemessungsregeln und Regeln für den Hochbau
Eurocode 3: Calcul des structures en acier - Partie 1-1: Règles générales et règles pour
les bâtiments
Ta slovenski standard je istoveten z: EN 1993-1-1:2005/FprA1
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
91.080.10 Kovinske konstrukcije Metal structures
SIST EN 1993-1-1:2005/kFprA1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1993-1-1:2005/kFprA1:2013

---------------------- Page: 2 ----------------------
SIST EN 1993-1-1:2005/kFprA1:2013


EUROPEAN STANDARD
FINAL DRAFT
EN 1993-1-1:2005
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
January 2013
ICS 91.010.30; 91.080.10
English Version
Eurocode 3: Design of steel structures - Part 1-1: General rules
and rules for buildings
Eurocode 3: Calcul des structures en acier - Partie 1-1: Eurocode 3: Bemessung und Konstruktion von Stahlbauten
Règles générales et règles pour les bâtiments - Teil 1-1: Allgemeine Bemessungsregeln und Regeln für
den Hochbau
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 250.

This draft amendment A1, if approved, will modify the European Standard EN 1993-1-1:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1993-1-1:2005/FprA1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1993-1-1:2005/kFprA1:2013
EN 1993-1-1:2005/FprA1:2013 (E)
Contents Page
Foreword . 3
1 Modification to National annex for EN 1993-1-1 . 4
2 Modification to 1.1.1 . 4
3 Modification to 2.1.2 . 4
4 Addition of Annex C, Selection of execution class . 4

2

---------------------- Page: 4 ----------------------
SIST EN 1993-1-1:2005/kFprA1:2013
EN 1993-1-1:2005/FprA1:2013 (E)
Foreword
This document (EN 1993-1-1:2005/FprA1:2013) has been prepared by Technical Committee
CEN/TC 250 “Structural Eurocodes”, the secretariat of which is held by BSI.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.

3

---------------------- Page: 5 ----------------------
SIST EN 1993-1-1:2005/kFprA1:2013
EN 1993-1-1:2005/FprA1:2013 (E)
1 Modification to National annex for EN 1993-1-1
nd
In the 2 paragraph, at the end of the list, add the two last list entries:
"
– C.2.2(3)
– C.2.2(5)".
2 Modification to 1.1.1
In Paragraph (3), replace:
"
– EN 1090 “Execution of Steel Structures – Technical requirements”"

with:
"
– EN 1090-1 “Execution of steel structures and al
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.