Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applicationsPart

IEC 63093-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be used with them, as well as the effective parameter values to be used in calculations involving them. It also gives guidelines on the allowable limits of surface irregularities applicable to pot-cores in accordance with the relevant generic specification.
The selection of core sizes and shapes for this document is based on the philosophy of including those sizes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included.
The general considerations upon which the design of this range of cores is based are given in Annex A.
This first edition cancels and replaces the first edition of IEC 62317-2 published in 2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition of IEC 62317-2:
a) addition of the limits of surface irregularities;
b) Table 4 and Table 5 are updated in accordance with IEC 60205:2016.

Ferritkerne – Richtlinien zu Maßen und Grenzen von Oberflächenbeschädigungen – Teil 2: Schalenkerne für die Verwendung in Telekommunikations-, Stromversorgungs- und Filteranwendungen

Noyaux ferrites - Dimensions - Partie 2: Circuits magnétiques en pots utilisés dans des applications de télécommunications, d'alimentation électrique et de filtre

L'IEC 63093-2:2020 spécifie les dimensions importantes pour l'interchangeabilité mécanique d'une gamme préférentielle de circuits magnétiques en pots en ferrite, les limites dimensionnelles des corps de bobines à utiliser avec ces pots et les valeurs de paramètres efficaces à utiliser dans les calculs les concernant. Elle donne également les lignes directrices relatives aux limites acceptables des irrégularités de surface applicables aux circuits magnétiques en pots conformément à la spécification générique correspondante.
Le choix des tailles et formes de noyau pour le présent document repose sur la philosophie consistant à introduire les tailles qui correspondent à des normes industrielles, soit dans une norme nationale soit par une utilisation à grande échelle dans le secteur industriel. Voir l'IEC 62317-1 pour de plus amples informations relatives à ce principe de choix des tailles de noyau à inclure.
Les considérations générales sur lesquelles s'appuie la conception de cette gamme de noyaux sont données à l'Annexe A.
Cette première édition annule et remplace la première édition de l'IEC 62317-2 parue en 2010. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente de l'IEC 62317-2:
a) ajout des limites des irrégularités de surface;
b) le Tableau 4 et le Tableau 5 sont mis à jour conformément à l'IEC 60205:2016.

Feritna jedra - Smernice o merah in mejnih vrednostih površinskih nepravilnosti - 2. del: Lončasta jedra za uporabo v telekomunikacijah, električnih napajalnikih in filtrih

General Information

Status
Published
Publication Date
03-May-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Apr-2021
Due Date
20-Jun-2021
Completion Date
04-May-2021

Relations

Buy Standard

Standard
EN IEC 63093-2:2021
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63093-2:2021
01-junij-2021
Nadomešča:
SIST EN 62317-2:2010
Feritna jedra - Smernice o merah in mejnih vrednostih površinskih nepravilnosti -
2. del: Lončasta jedra za uporabo v telekomunikacijah, električnih napajalnikih in
filtrih
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2:
Pot-cores for use in telecommunications, power supply, and filter applicationsPart
Noyaux ferrites - Dimensions - Partie 2: Circuits magnétiques en pots utilisés dans des
applications de télécommunications, d'alimentation électrique et de filtre
Ta slovenski standard je istoveten z: EN IEC 63093-2:2020
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN IEC 63093-2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63093-2:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 63093-2:2021


EUROPEAN STANDARD EN IEC 63093-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2020
ICS 29.100.10 Supersedes EN 62317-2:2010 and all of its amendments
and corrigenda (if any)
English Version
Ferrite cores - Guidelines on dimensions and the limits of
surface irregularities - Part 2: Pot-cores for use in
telecommunications, power supply, and filter applications
(IEC 63093-2:2020)
Noyaux ferrites - Lignes directrices relatives aux Ferritkerne - Richtlinien zu Maßen und Grenzen von
dimensions et limites des irrégularités de surface - Partie 2: Oberflächenbeschädigungen - Teil 2: Schalenkerne für die
Circuits magnétiques en pots utilisés dans des applications Verwendung in Telekommunikations-, Stromversorgungs-
de télécommunications, d'alimentation électrique et de filtre und Filteranwendungen
(IEC 63093-2:2020) (IEC 63093-2:2020)
This European Standard was approved by CENELEC on 2020-05-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63093-2:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63093-2:2021
EN IEC 63093-2:2020 (E)
European foreword
The text of document 51/1299/CDV, future edition 1 of IEC 63093-2, prepared by IEC/TC 51
"Magnetic components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 63093-2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-01
document have to be withdrawn

This document supersedes EN 62317-2:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63093-2:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62317-1 NOTE Harmonized as EN 62317-1


2

---------------------- Page: 4 ----------------------
SIST EN IEC 63093-2:2021
EN IEC 63093-2:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60205 - Calculation of the effective parameters of magnetic EN 60205 -
piece parts
IEC 60401-1 - Terms and nomenclature for cores made of - -
magnetically soft ferrites - Part 1: Terms used for
physical irregularities and reference of dimensions
IEC 60424-1 - Ferrite cores - Guidelines on the limits of surface EN 60424-1 -
irregularities - Part 1: General specification



3

---------------------- Page: 5 ----------------------
SIST EN IEC 63093-2:2021

---------------------- Page: 6 ----------------------
SIST EN IEC 63093-2:2021



IEC 63093-2

®


Edition 1.0 2020-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Ferrite cores – Guidelines on dimensions and the limits of surface

irregularities –

Part 2: Pot-cores for use in telecommunications, power supply, and filter


applications



Noyaux ferrites – Lignes directrices relatives aux dimensions et limites des


irrégularités de surface –

Partie 2: Circuits magnétiques en pots utilisés dans des applications

de télécommunications, d'alimentation électrique et de filtre










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.100.10 ISBN 978-2-8322-8008-9




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 63093-2:2021
– 2 – IEC 63093-2:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Primary dimensions . 7
4.1 Dimensions of pot-cores . 7
4.1.1 General . 7
4.1.2 Principal dimensions . 7
4.1.3 Wire-ways. 9
4.1.4 Effective parameter values . 9
4.2 Main dimensions for coil formers . 10
5 Limits of surface irregularities . 11
5.1 General . 11
5.2 Examples of surface irregularities . 11
5.3 Chips and ragged edges . 12
5.3.1 General . 12
5.3.2 Chips and ragged edges on the mating surfaces . 12
5.3.3 Chips and ragged edges on the other surfaces . 12
5.4 Cracks . 15
5.5 Pull-out, crystallite and pore locations . 16
5.6 Flash . 16
Annex A (informative) Pot-core design . 18
Annex B (informative) Example of gauges to check the dimensions of pot-cores . 19
B.1 General . 19
B.2 Procedure and requirements . 20
Bibliography . 21

Figure 1 – Principal dimensions of pot-cores without back wall slots . 8
Figure 2 – Principal dimensions of pot-cores with back wall slots . 8
Figure 3 – Main dimensions of coil formers for pot-cores . 11
Figure 4 – Examples of surface irregularities . 12
Figure 5 – Chips location for pot-cores . 13
Figure 6 – Cracks location – Top view . 15
Figure 7 – Cracks location – Bottom view . 15
Figure 8 – Pull-out, crystallite and pore locations . 16
Figure 9 – Flash location. 17
Figure B.1 – Dimensions of gauge A . 19
Figure B.2 – Dimensions of gauges B and C . 20

Table 1 – Principal dimensions of pot-cores . 7
Table 2 – Limits for dimensions C and G . 9
Table 3 – Minimum wire-way depth . 9
Table 4 – Effective parameter values for pot-cores with a centre hole . 10
Table 5 – Effective parameter values for pot-cores without a centre hole . 10

---------------------- Page: 8 ----------------------
SIST EN IEC 63093-2:2021
IEC 63093-2:2020 © IEC 2020 – 3 –
Table 6 – Main dimensions of coil formers for pot-cores . 11
Table 7 – Area and length references of irregularities for visual inspection . 14
Table 8 – Limits for cracks . 16
Table A.1 – Ratio of diameter to height . 18
Table B.1 – Dimensions of gauge A . 19
Table B.2 – Dimensions of gauges B and C . 20

---------------------- Page: 9 ----------------------
SIST EN IEC 63093-2:2021
– 4 – IEC 63093-2:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FERRITE CORES – GUIDELINES ON DIMENSIONS
AND THE LIMITS OF SURFACE IRREGULARITIES –

Part 2: Pot-cores for use in telecommunications,
power supply, and filter applications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 63093-2 has been prepared by technical committee 51: Magnetic
components, ferrite and magnetic powder materials.
This first edition cancels and replaces the first edition of IEC 62317-2 published in 2010. This
edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition of IEC 62317-2:
a) addition of the limits of surface irregularities;
b) Table 4 and Table 5 are updated in accordance with IEC 60205:2016.

---------------------- Page: 10 ----------------------
SIST EN IEC 63093-2:2021
IEC 63093-2:2020 © IEC 2020 – 5 –
The text of this International Standard is based on the following documents:
CDV Report on voting
51/1299/CDV 51/1322/RVC

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 63093 series, published under the general title Ferrite cores –
Guidelines on dimensions and the limits of surface irregularities, can be found on the IEC
website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.