Nickel alloys — Determination of tantalum — Inductively coupled plasma optical emission spectrometric method

This document specifies an inductively coupled plasma optical emission spectrometric method for the determination of tantalum contents between 0,1 % and 5 % in nickel alloys.

Alliages de nickel — Détermination du tantale — Méthode par spectrométrie d'émission optique avec source à plasma induit par haute fréquence

Le présent document spécifie une méthode de détermination des teneurs en tantale comprises entre 0,1 % et 5 % dans les alliages de nickel, par spectrométrie d'émission optique avec source à plasma induit par haute fréquence.

General Information

Status
Published
Publication Date
04-Dec-2018
Current Stage
9020 - International Standard under periodical review
Start Date
15-Oct-2023
Completion Date
15-Oct-2023
Ref Project

Buy Standard

Standard
ISO 23166:2018 - Nickel alloys -- Determination of tantalum -- Inductively coupled plasma optical emission spectrometric method
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 23166:2018 - Alliages de nickel -- Détermination du tantale -- Méthode par spectrométrie d'émission optique avec source a plasma induit par haute fréquence
French language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 23166
First edition
2018-12
Nickel alloys — Determination
of tantalum — Inductively
coupled plasma optical emission
spectrometric method
Alliages de nickel — Détermination du tantale — Méthode par
spectrométrie d'émission optique avec source à plasma induit par
haute fréquence
Reference number
ISO 23166:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 23166:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 23166:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 3
7 Sampling and sample preparation . 3
8 Procedure. 4
8.1 Test portion . 4
8.2 Preparation of test solution, T .
TA 4
8.3 Optimization of the spectrometer . 4
8.4 Pre-determination of the test solution . 5
8.5 Preparation of calibration solutions for bracketing, K and K .
I,Ta h,Ta 5
8.6 Measurement of test solutions . 6
9 Expression of results . 6
9.1 Method of calculation . 6
9.2 Precision . 6
9.2.1 Laboratory tests .
...

NORME ISO
INTERNATIONALE 23166
Première édition
2018-12
Alliages de nickel — Détermination du
tantale — Méthode par spectrométrie
d'émission optique avec source à
plasma induit par haute fréquence
Nickel alloys — Determination of tantalum — Inductively coupled
plasma optical emission spectrometric method
Numéro de référence
ISO 23166:2018(F)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 23166:2018(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2018
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2018 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 23166:2018(F)

Sommaire Page
Avant-propos .iv
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Réactifs . 2
6 Appareillage . 3
7 Prélèvement et préparation des échantillons. 4
8 Mode opératoire. 4
8.1 Prise d’essai . 4
8.2 Préparation de la solution pour essai, T .
TA 4
8.3 Optimisation du spectromètre . 5
8.4 Analyse préliminaire de la solution pour essai . 5
8.5 Préparation des solutions d’étalonnage par encadrement, K et K .
I,Ta h,Ta 6
8.6 Mesurage des solutions pour essai . 6
9 Expression des résultats. 6
9.1 Méthode de calcul . 6
9.2 Fidélité . 6
9.2.1 Essais interlaboratoires .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.