Leather — Chemical determination of metal content — Part 1: Extractable metals

This document specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspiration solution and subsequent determination with inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines extractable metals in leather; it is not compound-specific or specific to the oxidation state of the metals. This method is especially suitable for determining the extractable chromium in chromium-tanned leathers.

Cuir — Détermination chimique de la teneur en métal — Partie 1: Métaux extractibles

Le présent document spécifie une méthode de détermination des métaux extractibles du cuir s'appuyant sur l'extraction à l'aide d'une solution de sueur artificielle acide suivie d'une détermination par spectrométrie d'émission optique avec plasma à couplage inductif (ICP-OES), par spectrométrie de masse avec plasma à couplage inductif (ICP-MS), par spectrométrie d'absorption atomique (AAS) ou par spectrométrie de fluorescence atomique (SFA). La présente méthode détermine les métaux extractibles présents dans le cuir. Elle n'est pas spécifique à un composé ou à l'état d'oxydation des métaux. La présente méthode est particulièrement adaptée à la détermination du chrome extractible dans les cuirs tannés au chrome.

General Information

Status
Published
Publication Date
27-Feb-2019
Current Stage
9020 - International Standard under periodical review
Start Date
15-Jan-2024
Completion Date
15-Jan-2024
Ref Project

Relations

Buy Standard

Standard
ISO 17072-1:2019 - Leather -- Chemical determination of metal content
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 17072-1:2019 - Cuir -- Détermination chimique de la teneur en métal
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17072-1
IULTCS/IUC27-1
Second edition
2019-02
Leather — Chemical determination of
metal content —
Part 1:
Extractable metals
Cuir — Détermination chimique de la teneur en métal —
Partie 1: Métaux extractibles
Reference numbers
ISO 17072-1:2019(E)
IULTCS/IUC27-1:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 17072-1:2019(E)
IULTCS/IUC27-1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17072-1:2019(E)
IULTCS/IUC27-1:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Principle . 2
5 Reagents . 2
6 Apparatus and materials. 3
7 Sampling and sample preparation . 3
8 Procedure. 4
8.1 Preparation of acid artificial-perspiration solution . 4
8.2 Extraction of leather sample . 4
8.3 Analysis by ICP, AAS and SFA . 4
8.3.1 General. 4
8.3.2 ICP. 5
8.3.3 AAS . 5
8.3.4 Analysis by SFA technique . 5
9 Calculation and expression of results . 5
10 Test report . 6
Annex A (informative) Interlaboratory test results and quantificati
...

NORME ISO
INTERNATIONALE 17072-1
IULTCS/IUC27-1
Deuxième édition
2019-02
Cuir — Détermination chimique de la
teneur en métal —
Partie 1:
Métaux extractibles
Leather — Chemical determination of metal content —
Part 1: Extractable metals
Numéros de référence
ISO 17072-1:2019(F)
IULTCS/IUC27-1:2019(F)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 17072-1:2019(F)
IULTCS/IUC27-1:2019(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 17072-1:2019(F)
IULTCS/IUC27-1:2019(F)
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 2
4 Principe . 2
5 Réactifs . 2
6 Appareillage et matériel . 3
7 Échantillonnage et préparation des échantillons . 3
8 Mode opératoire. 4
8.1 Préparation d’une solution de sueur artificielle acide . 4
8.2 Extraction d’un échantillon de cuir . 4
8.3 Analyse par ICP, AAS et SFA . 4
8.3.1 Généralités . 4
8.3.2 ICP. 5
8.3.3 AAS . 5
8.3.4 Analyse par la technique SFA . 5
9 Calcul et expression des résultats . 5
10 Rapport d’essai . 6
Annexe A (informative) Résultats de l’essai interlaboratoires et limites de quantification .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.