iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC TR 62131-2:2011

(Main)

Environmental conditions - Vibration and shock of electrotechnical equipment - Part 2: Equipment transported in fixed wing jet aircraft

Environmental conditions - Vibration and shock of electrotechnical equipment - Part 2: Equipment transported in fixed wing jet aircraft

IEC/TR 62131-2:2011(E) reviews the available dynamic data relating to electrotechnical equipment transported in fixed wing jet transport aircraft. The intent is that from all the available data an environmental description will be generated and compared to that set out in IEC 60721.

General Information

Status
Published
Publication Date
23-Feb-2011
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
19.040 - Environmental testing
Technical Committee
TC 104 - Environmental conditions, classification and methods of test
Drafting Committee
WG 15 - TC 104/WG 15
Current Stage
PPUB - Publication issued
Start Date
15-Jun-2011
Completion Date
24-Feb-2011
Ref Project

Buy Standard

IEC TR 62131-2:2011 - Environmental conditions - Vibration and shock of electrotechnical equipment - Part 2: Equipment transported in fixed wing jet aircraftIEC TR 62131-2:2011 - Environmental conditions - Vibration and shock of electrotechnical equipment - Part 2: Equipment transported in fixed wing jet aircraft
PreviousNext
Technical report
IEC TR 62131-2:2011 - Environmental conditions - Vibration and shock of electrotechnical equipment - Part 2: Equipment transported in fixed wing jet aircraft
English language
40 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC/TR 62131-2
®

Edition 1.0 2011-02
TECHNICAL
REPORT


colour
inside


Environmental conditions – Vibration and shock of electrotechnical equipment –
Part 2: Equipment transported in fixed wing jet aircraft


IEC/TR 62131-2:2011(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2011 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00

---------------------- Page: 2 ----------------------
IEC/TR 62131-2
®

Edition 1.0 2011-02
TECHNICAL
REPORT

colour
inside


Environmental conditions – Vibration and shock of electrotechnical equipment –
Part 2: Equipment transported in fixed wing jet aircraft



INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
W
ICS 19.040 ISBN 978-2-88912-383-4

® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – TR 62131-2 © IEC:2011(E)
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Data source and quality . 7
3.1 Lockheed Tristar KC Mk 1 . 7
3.2 BAe VC10 K . 7
3.3 Boeing 747 Combi (freight and passengers) . 8
3.4 Supplementary data . 10
3.4.1 McDonnell Douglas DC8 cargo . 10
3.4.2 Lockheed C5A (Galaxy), Lockheed C-141 (Starlifter) and Boeing NC-
135 (707) . 10
4 Intra data source comparison . 10
4.1 General remark . 10
4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC TR 60721-4-1:2001+AMD1:2003 CSV(Main)
Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage

IEC 60721-4-1:2001+A1:2003 Deals with the correlation and transformation of the condition given in IEC 60721-3-1 to the environmental tests defined in IEC 60068-2. An environment may consist of a number of environmental conditions such as dynamic, climatic, and biological and other effects, due to chemically and mechanically active substances. In this report, only dynamic and climatic conditions have been considered. The purpose of this technical report is to provide the specification writer with guidance together with a set of easy-to-use tables which correlate and transform these conditions.
This consolidated version consists of the first edition (2001) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

  • Technical report
    91 pages
    English and French language
    sale 15% off
  • Technical report
    91 pages
    English and French language
    sale 15% off
IEC
IEC TR 60721-4-2:2001+AMD1:2003 CSV(Main)
Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation

IEC TR 60721-4-2:2001+A1:2003 Deals with the correlation and transformation of the conditions given in IEC 60721-3-2 to the environmental tests defined in IEC 60068-2. An environment may consist of a number of environmental conditions such as dynamic, climatic and biological and other effects due to chemically and mechanically active substances. In this report, only dynamic and climatic conditions have been considered. The purpose of this technical report is to provide the specification writer with guidance together with a set of easy-to-use tables which correlate and transform these conditions.
This consolidated version consists of the first edition (2001) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

  • Technical report
    81 pages
    English and French language
    sale 15% off
  • Technical report
    81 pages
    English and French language
    sale 15% off
IEC
IEC TR 60721-4-4:2001+AMD1:2003 CSV(Main)
Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations

IEC TR 60721-4-4:2001+A1:2003 Deals with the correlation and transformation of the conditions given in IEC 60721-3-4 to the environmental tests defined in IEC 60068-2. An environment may consist of a number of environmental conditions such as dynamic, climatic and biological and other effects due to chemically and mechanically active substances. In this report, only dynamic and climatic conditions have been considered. The purpose of this technical report is to provide the specification writer with guidance together with a set of easy-to-use tables which correlate and transform these conditions.
This consolidated version consists of the first edition (2001) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

  • Technical report
    101 pages
    English and French language
    sale 15% off
  • Technical report
    101 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This document is intended primarily for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- verbal forms have, in many parts, been changed to express requirements instead of recommendations ('shall' instead of 'should');
- Table 1 has been updated.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 60721-3-0:2020(Main)
Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction

IEC 60721-3-0:2020 provides guidance on the use of all parts of IEC 60721-3. It contains background information including information on the application and limitation of the classes given in various parts of IEC 60721-3 which can be used in the design, limitation of conditions and protection of equipment.
This second edition cancels and replaces the first edition published in 1984 and Amendment 1:1987. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) This edition has been extensively simplified to only provide necessary information with regard to the process given in the other parts of IEC 60721-3 and information on class severity has been updated.

  • Standard
    17 pages
    English and French language
    sale 15% off
IEC
IEC TR 62131-7:2020(Main)
Environmental conditions – Vibration and shock of electrotechnical equipment - Part 7: Transportation by rotary wing aircraft

IEC 62131-7:2020(E), reviews the available dynamic data relating to the transportation of electrotechnical equipment by rotorcraft (helicopters). The intent is that from all the available data an environmental description will be generated and compared to that set out in IEC 60721 (all parts).

  • Technical report
    51 pages
    English language
    sale 15% off
IEC
IEC TR 63141:2020(Main)
Damp heat, steady state (unsaturated pressurized vapour with air)

IEC TR 63141:2020(E) describes a new test method to control the volume of air injected into a conventional HAST chamber filled with water vapour. This document provides an overview of the conventional HAST chamber, an overview of the air-HAST equipment where air is incorporated into the HAST chamber, an example of an air-HAST test apparatus, and application examples of air-HAST.

  • Technical report
    56 pages
    English language
    sale 15% off
IEC
IEC 60068-2-64:2008/AMD1:2019(Amendment)
Amendment 1 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-3:2019(Main)
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment

IEC 60068-3-3:2019 applies primarily to electro-technical equipment but its application can be extended to other equipment and to components. In addition, if some type of analysis is always performed when making a seismic qualification, for example for the choice of the representative sample to be tested or for the extension of the seismic qualification from the tested specimen to similar specimens, the verification of the performance of an equipment by analysis or by a combination of testing and analysis can be acceptable but is outside the scope of this document, which is restricted to verification based entirely upon data from dynamic testing. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- the main aim of this revision is to connect the testing level to the seismic activity level of the zone where the equipment could be installed;
- a standard shape for the required response spectrum is also given for the general seismic class for which the seismic environment is either not known or is imprecisely known;
- Clauses 11 to 15 were renumbered and some adjustments were made as their content is very general and the requirements can be applied both to the general seismic class and to the specific seismic class;
- the word “envelope” is replaced with “dominance” and “to envelop” with “to dominate” in order to provide a more precise meaning from a mathematical point of view.
The contents of the corrigendum of September 2021 have been included in this copy.

  • Standard
    95 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-67:1995/AMD1:2019(Amendment)
Amendment 1 - Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
  • Standard
    4 pages
    English and French language
    sale 15% off