Optical fibres - Part 2: Product specifications - General

IEC 60793-2:2019 is available as IEC 60793-2:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60793-2:2019 contains the general specifications for both multimode and single-mode optical fibres. Sectional specifications for each of the four categories of multimode fibres: A1, A2, A3, and A4 (part of the multimode fibre class A) contain requirements specific to each category. Sectional specifications for each of the three single-mode fibre classes, B, C and D contain requirements common to each class. Each sectional specification includes family specifications (in normative annexes) that contain requirements for the applicable category or sub-categories. These sub-categories are distinguished on the basis of different fibre types or applications. The requirements of this document apply to all classes. Each sectional specification contains the requirements that are common to all the family specifications that are within it. These common requirements are copied to the family specification for ease of reference. Tests or measurement methods are defined for each specified attribute. Where possible, these definitions are by reference to an IEC International Standard (see IEC 60793-1 series) – otherwise the test or measurement method is outlined in the relevant sectional specification. This ninth edition cancels and replaces the eighth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- introduction of the revised fibre designations for most A1 sub-category fibres and all class B single-mode fibres;
- addition of the new fibre model (A1-OM5) defined for A1 category;
- addition of class D polarization maintaining fibres.
Keywords: specifications for both multimode and single-mode optical fibres

Fibres optiques - Partie 2: Spécifications de produits - Généralités

IEC 60793-2:2019 est disponible sous forme de IEC 60793-2:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60793-2:2019 contient les spécifications générales applicables à la fois aux fibres optiques unimodales et multimodales. Les spécifications intermédiaires pour chacune des catégories des quatre fibres multimodales: A1, A2, A3 et A4 (parties de la classe de fibres multimodales A) contiennent des exigences spécifiques à chaque catégorie. Les spécifications intermédiaires pour chacune des trois classes de fibres unimodales, B, C et D, contiennent des exigences communes à chaque classe. Chaque spécification intermédiaire inclut des spécifications de famille (dans les annexes normatives) qui contiennent des exigences pour la catégorie ou les sous-catégories applicables. La distinction entre ces différentes sous-catégories se fonde sur les différents types de fibres ou les différentes applications. Les exigences du présent document s'appliquent à toutes les classes. Chaque spécification intermédiaire contient les exigences qui sont communes à toutes les spécifications de famille qu'elle regroupe. Ces exigences communes sont reprises dans la spécification de famille pour qu'il soit plus facile de s'y référer. Les essais ou les méthodes de mesure sont définis pour chaque attribut spécifié. Dans la mesure du possible, ces définitions se font par référence à une Norme internationale de l'IEC (voir série IEC 60793-1). Si ce n'est pas le cas, l'essai ou la méthode de mesure est indiqué dans la spécification intermédiaire correspondante. Cette neuvième édition annule et remplace la huitième édition parue en 2015. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- introduction des désignations révisées de la plupart des fibres de la sous-catégorie A1 et de toutes les fibres unimodales de la classe B;
- ajout du nouveau modèle de fibre (A1-OM5) défini pour la catégorie A1;
- ajout des fibres de maintien de la polarisation de classe D.
Mots-clés : spécifications applicables à la fois aux fibres optiques unimodales et multimodales

General Information

Status
Published
Publication Date
14-Nov-2019
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
13-Dec-2019
Completion Date
15-Nov-2019
Ref Project

Buy Standard

Standard
IEC 60793-2:2019 - Optical fibres - Part 2: Product specifications - General
English and French language
33 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 60793-2
®

Edition 9.0 2019-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Optical fibres –
Part 2: Product specifications – General

Fibres optiques –
Partie 2: Spécifications de produits – Généralités

IEC 60793-2:2019-11(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2019 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.