Information technology - Measurement of end-to-end (E2E) links

This document specifies the measurement at frequencies of E2E links of two- and four-pair balanced cabling of 100 MHz of Class D and 250 MHz of Class E including free connectors which terminate two and four pairs in both field and laboratory conditions. The specifications for E2E links are described in ISO/IEC TR 11801-9902. This document specifies laboratory and field measurement procedures. The requirements for accuracy to measure cabling parameters identified in ISO/IEC TR 11801-9902 are provided in EN 61935-1 and EN 61935-2.

Informationstechnik - Messung von Ende-zu-Ende-Verbindungsstrecken

Die symmetrische Verkabelung dient der Verbindung von Geräten mittels freier Steckverbinder. Es ist bekannt, dass Feldanschlüsse an allen Teilen der Übertragungsstrecke Auswirkungen auf das Leistungsvermögen der Übertragungsstrecke haben. Unzulängliche Anschlüsse können das Leistungsvermögen der Übertragungsstrecke und die Zuverlässigkeit der Datenübertragung beeinträchtigen. Bisher wurde zur Überprüfung von Verkabelung mit Feldanschlüssen das Leistungsvermögen von Übertragungsstrecken der Klasse D oder E nach EN 50173-1 gemessen. Bei der Messung von Übertragungsstrecken der Klasse D oder E werden die Verbindungen am Ende des Kabels nicht berücksichtigt. Bei der Messung von Übertragungsstrecken der Klasse D oder E werde die Auswirkungen unzulänglicher Anschlüsse der Verbindungen am Ende auf das Leistungsvermögen nicht ermittelt. Bei der Messung des Leistungsvermögens einer Ende-zu-Ended-(EzE)-Verbindungsstrecke werden die Anschlüsse an beiden Enden der symmetrischen Verkabelung berücksichtigt. Dieses Dokument beschreibt die Messung von EzE-Verbindungsstrecken symmetrischer Verkabelungen mit zwei und vier Paaren von Klasse D mit 100 MHz und Klasse E mit 250 MHz mittels Messverfahren mit Labor-und Feldprüfgeräten. Das Leistungvermögen von EzE-Verbindungsstrecken ist in ISO/IEC TR 11801-9902 beschrieben. Diese Europäische Norm ist eines der Dokumente zur Unterstützung der Europäischen Normen und Technischen Berichte über informations- und telekommunikationstechnische Verkabelung, die von CLC/TC 215 erstellt werden.

Technologies de l’information - Mesurage des liaisons de bout en bout (E2E)

Le présent document spécifie le mesurage des liaisons E2E des câblages à deux et quatre paires symétriques à des fréquences de 100 MHz pour la classe D et de 250 MHz pour la classe E comportant des fiches à l’extrémité de deux et quatre paires à la fois dans des conditions de laboratoire et de terrain. Les spécifications pour les liaisons E2E sont décrites dans l’ISO/IEC TR 11801 9902. Le présent document spécifie les procédures de mesure en laboratoire et sur le terrain. Les exigences concernant l’exactitude de mesure pour les paramètres de câblage identifiés dans l’ISO/IEC TR 11801 9902 sont données dans l’EN 61935 1 et dans l’EN 61935 2.

Informacijska tehnologija - Merjenje povezav od konca do konca (E2E)

Ta standard določa merjenje povezav od konca do konca dvo- in štirižilnih uravnoteženih kablov 100 MHz razreda D in 250 MHz razreda E, vključno s prostimi konektorji, s katerimi so zaključeni dvo- in štirižilni kabli, v terenskih in laboratorijskih pogojih.

General Information

Status
Published
Publication Date
18-Jul-2019
Withdrawal Date
07-May-2022
Current Stage
6060 - Document made available - Publishing
Start Date
19-Jul-2019
Due Date
23-Dec-2020
Completion Date
19-Jul-2019

Relations

Buy Standard

Standard
EN 50697:2019
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50697:2018
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50697:2019
01-september-2019
Informacijska tehnologija - Merjenje povezav od konca do konca (E2E)
Information technology - Measurement of end-to-end (E2E) links
Informationstechnik – Messung von Ende-zu-Ende-Verbindungsstrecken
Technologies de l’information - Mesurage des liaisons de bout en bout (E2E)
Ta slovenski standard je istoveten z: EN 50697:2019
ICS:
35.110 Omreževanje Networking
SIST EN 50697:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50697:2019

---------------------- Page: 2 ----------------------

SIST EN 50697:2019


EUROPEAN STANDARD EN 50697

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2019
ICS 33.100.10; 35.110

English Version
Information technology - Measurement of end-to-end (E2E) links
Technologies de l'information - Mesurage des liaisons de Informationstechnik - Messung von Ende-zu-Ende-
bout en bout (E2E) Verbindungsstrecken
This European Standard was approved by CENELEC on 2019-05-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50697:2019 E

---------------------- Page: 3 ----------------------

SIST EN 50697:2019
EN 50697:2019 (E)

Contents
European foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms, definitions and abbreviations .5
3.1 Terms and definitions .5
3.2 Abbreviations .6
4 Conformance .6
5 Configuration and limits of performance of E2E link .6
6 Test configuration of E2E link .6
7 E2E link testing .7
8 Laboratory testing of E2E link .7
9 Field testing of E2E link .8
9.1 Visual inspection .8
9.2 Requirements of field test equipment .8
9.3 Field test measurement parameters .8
10
...

SLOVENSKI STANDARD
oSIST prEN 50697:2018
01-december-2018
Informacijska tehnologija - Merjenje povezav od konca do konca (E2E)
Information technology - Measurement of end-to-end (E2E) links
Informationstechnik – Messung von Ende-zu-Ende-Verbindungsstrecken
Technologies de l’information - Mesurage des liaisons de bout en bout (E2E)
Ta slovenski standard je istoveten z: prEN 50697
ICS:
33.100.10 Emisija Emission
35.110 Omreževanje Networking
oSIST prEN 50697:2018 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50697:2018

---------------------- Page: 2 ----------------------
oSIST prEN 50697:2018

EUROPEAN STANDARD DRAFT
prEN 50697
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2018
ICS 33.100.10; 35.110
English Version
Information technology - Measurement of end-to-end (E2E) links
Technologies de l'information - Mesurage des liaisons de Informationstechnik - Messung von Ende-zu-Ende-
bout en bout (E2E) Verbindungsstrecken
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2019-01-25.

It has been drawn up by CLC/TC 215.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 67280 Ref. No. prEN 50697 E

---------------------- Page: 3 ----------------------
oSIST prEN 50697:2018
prEN 50697:2018 (E)
1 Contents Page
2 European foreword .3
3 Introduction .4
4 1 Scope .5
5 2 Normative references .5
6 3 Terms, definitions and abbreviations .5
7 3.1 Terms and definitions .5
8 3.2 Abbreviations .6
9 4 Conformance .6
10 5 Configuration and limits of performance of E2E link .6
11 6 Test configuration of E2E link .7
12 Figure 1 — Reference planes and configuration of E2E link .7
13 7 E2E link testing .7
14 8 Laboratory testing of E2E link .7
15 9 Fiel
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.