Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports

IEC 62368-3:2017 applies to equipment intended to supply and receive operating power through communication cables or ports. It covers particular requirements for circuits that are designed to transfer DC power from a power sourcing equipment (PSE) to a powered device (PD). The power transfer uses voltages at ES1 or ES2 or in very specific cases voltage levels at ES3. Any cable provided with a connector defined by an industry standard that permits DC power transfer between equipment is considered a communication cable even if communication does not take place. For example, a USB cable can be used just to recharge a portable device battery. This International Standard is to be used in conjunction with IEC 62368-1:2014. It has the status of a group safety publication in accordance with IEC Guide 104. The subclauses of IEC 62368-1 apply as far as reasonable. Where safety aspects are similar to those of IEC 62368-1, the relevant clause or subclause of IEC 62368-1 is given for reference in a note in the relevant subclause. Where a requirement in IEC 62368-3 refers to a requirement or criterion of IEC 62368-1, a specific reference to IEC 62368-1 is made. This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. Keywords: Communication, Safety, Cables, DC Power Transfer,

Einrichtungen für Audio/Video, Informations- und Kommunikationstechnik – Teil 3: Sicherheitsaspekte für Gleichstrom-Leistungsübertragung über Kommunikations-Kabel und Anschlüssen

Équipements des technologies de l’audio/vidéo, de l’information et de la communication - Partie 3: Aspects liés à la sécurité relatifs au transfert de puissance en courant continu au moyen de câbles et d’accès de communication

IEC 62368-3:2017 s’applique aux équipements conçus pour fournir et recevoir de l’énergie de fonctionnement au moyen de câbles et d’accès de communication. Elle couvre les exigences particulières relatives aux circuits conçus pour transférer de la puissance en courant continu d’un équipement source d’alimentation (PSE - power sourcing equipment) à un dispositif alimenté (PD - powered device). Le transfert de puissance utilise des tensions à ES1 ou ES2 ou, dans des cas très spécifiques, des niveaux de tensions à ES3. Tout câble équipé d’un connecteur défini par une norme industrielle permettant le transfert de puissance en courant continu entre des équipements est considéré comme étant un câble de communication, même en l’absence de communication. Par exemple, un câble USB peut être utilisé uniquement pour recharger une batterie de dispositif portable. Cette Norme Internationale doit être utilisée conjointement avec l'IEC IEC 62368-1:2014. Elle a le statut d'une publication groupée de sécurité conformément au Guide IEC 104. Les paragraphes de l’IEC 62368-1 s’appliquent dans la mesure du possible. Lorsque les aspects liés à la sécurité sont similaires à ceux décrits dans l’IEC 62368-1, l’article ou le paragraphe pertinent de l’IEC 62368-1 est indiqué à titre de référence dans une note qui figure dans le paragraphe concerné. Lorsqu’une exigence de l’IEC 62368-3 fait référence à une exigence ou un critère de l’IEC 62368-1, une référence particulière est faite à l’IEC 62368-1. La présente publication groupée de sécurité est avant tout destinée à être utilisée en tant que norme en matière de sécurité des produits pour les produits cités dans le domaine d’application, mais elle doit également être utilisée par les comités d’études dans le cadre de l’élaboration de normes pour des produits similaires à ceux cités dans le domaine d’application de la présente norme, conformément aux principes établis dans le Guide IEC 104 et le Guide ISO/IEC 51. Mots clés: communication, sécurité, câbles, transfert de puissance en courant continu

Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - 3. del: Vidiki varnosti za prenos enosmerne moči skozi komunikacijske kable ali porte (IEC 62368-3:2017)

General Information

Status
Published
Publication Date
26-Mar-2020
Withdrawal Date
19-Dec-2020
Current Stage
6060 - Document made available - Publishing
Start Date
27-Mar-2020
Completion Date
27-Mar-2020

Relations

Buy Standard

Standard
EN IEC 62368-3:2020
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62368-3:2020
01-julij-2020
Nadomešča:
SIST EN 60950-21:2004
Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - 3. del: Vidiki
varnosti za prenos enosmerne moči skozi komunikacijske kable ali porte (IEC
62368-3:2017)
Audio/video, information and communication technology equipment - Part 3: Safety
aspects for DC power transfer through communication cables and
ports
Einrichtungen für Audio/Video, Informations- und Kommunikationstechnik - Sicherheit -
Teil 3: Gleichstrom-Leistungsübertragung über Kommunikationskabel der
Informationstechnik (IEC 62368-3:2017)
Équipements des technologies de l'audio/vidéo, de l'information et de la communication -
Partie 3: Aspects liés à la sécurité relatifs au transfert de puissance en courant continu
au moyen de câbles et d'accès de communication (IEC 62368-3:2017)
Ta slovenski standard je istoveten z: EN IEC 62368-3:2020
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
SIST EN IEC 62368-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62368-3:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62368-3:2020


EUROPEAN STANDARD EN IEC 62368-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2020
ICS 33.160.01; 35.020 Supersedes EN 60950-21:2003 and all of its
amendments and corrigenda (if any)
English Version
Audio/video, information and communication technology
equipment - Part 3: Safety aspects for DC power transfer
through communication cables and ports
(IEC 62368-3:2017)
Équipements des technologies de l'audio/vidéo, de Einrichtungen für Audio/Video, Informations- und
l'information et de la communication - Partie 3: Aspects liés Kommunikationstechnik - Sicherheit - Teil 3: Gleichstrom-
à la sécurité relatifs au transfert de puissance en courant Leistungsübertragung über Kommunikationskabel der
continu au moyen de câbles et d'accès de communication Informationstechnik
(IEC 62368-3:2017) (IEC 62368-3:2017)
This European Standard was approved by CENELEC on 2018-01-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62368-3:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62368-3:2020
EN IEC 62368-3:2020 (E)
European foreword
The text of document 108/695/FDIS, future edition 1 of IEC 62368-3, prepared by IEC/TC 108 "Safety
of electronic equipment within the field of audio/video, information technology and communication
technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62368-3:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-09-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2020-12-20
document have to be withdrawn

This document supersedes EN 60950-21:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free T
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.