EN IEC 61960-4:2020
(Main)Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4: Coin secondary lithium cells, and batteries made from them
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4: Coin secondary lithium cells, and batteries made from them
IEC 61960-4:2020 specifies performance tests, designations, markings, dimensions and other requirements for coin secondary lithium cells and batteries for portable applications and backup power supply such as memory backup applications. The objective of this document is to provide the purchasers and users of coin secondary lithium cells and batteries with a set of criteria with which they can assess the performance of coin secondary lithium cells and batteries offered by various manufacturers. This document defines a minimum required level of performance and a standardized methodology by which testing is performed and the results of this testing reported to the user. Hence, users will be able to establish the viability of commercially available cells and batteries via the declared specification and thus be able to select the cell or battery best suited for their intended application. This document covers coin secondary lithium cells and batteries with a range of chemistries. Each electrochemical couple has a characteristic voltage range over which, during discharge, it releases its electrical capacity, a characteristic nominal voltage and a characteristic end-of-discharge voltage. Users of coin secondary lithium cells and batteries are requested to consult the manufacturer for advice. This document also provides guidelines for designers of equipment using lithium batteries.
Sekundärzellen und -batterien mit alkalischen oder anderen nicht-säurehaltigen Elektrolyten - Sekundäre Lithiumzellen und -batterien für tragbare Anwendungen - Teil 4: Sekundäre Lithium-Knopfzellen und daraus hergestellte Batterien
Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs au lithium pour applications portables - Partie 4: Éléments et batteries d’accumulateurs boutons au lithium
L'IEC 61960-4:2020 spécifie les essais de performance, les désignations, les marquages, les dimensions et autres exigences pour les éléments et batteries d'accumulateurs boutons au lithium destinés aux applications portables et d'alimentation de secours telles que les applications de sauvegarde de mémoire. L'objectif du présent document est de fournir aux acheteurs et aux utilisateurs d'éléments et batteries d'accumulateurs boutons au lithium un ensemble de critères au moyen desquels ils peuvent évaluer la performance des différents accumulateurs de ce type proposés par différents fabricants. Le présent document définit un niveau d'exigence minimale de performance et une méthodologie normalisée par laquelle sont réalisés les essais dont les résultats sont mis à la disposition de l'utilisateur. Les utilisateurs sont alors en mesure d'apprécier par eux-mêmes la viabilité des accumulateurs disponibles dans le commerce au moyen de la spécification déclarée et donc de sélectionner l'élément ou la batterie le ou la mieux adapté(e) à l'application prévue. Le présent document concerne les éléments et batteries d'accumulateurs boutons au lithium dans une large gamme de couples électrochimiques. Chaque couple électrochimique possède une plage de tension caractéristique dans laquelle il restitue, en décharge, sa capacité emmagasinée, une tension nominale caractéristique et une tension de fin de décharge caractéristique. Il est demandé aux utilisateurs d'éléments et batteries d'accumulateurs boutons au lithium de prendre conseil auprès du fabricant. Le présent document fournit également des lignes directrices pour les concepteurs d'équipements utilisant des batteries au lithium.
Sekundarni členi in baterije, ki vsebujejo alkalne ali druge nekislinske elektrolite - Sekundarni litijevi členi in baterije za prenosne naprave - 4. del: Gumbni litijevi sekundarni členi in baterije
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61960-4:2020
01-oktober-2020
Sekundarni členi in baterije, ki vsebujejo alkalne ali druge nekislinske elektrolite -
Sekundarni litijevi členi in baterije za prenosne naprave - 4. del: Gumbni litijevi
sekundarni členi in baterije
Secondary cells and batteries containing alkaline or other non-acid electrolytes -
Secondary lithium cells and batteries for portable applications - Part 4: Coin types
(button) lithium secondary cells and batteries
Ta slovenski standard je istoveten z: EN IEC 61960-4:2020
ICS:
29.220.30 Alkalni sekundarni členi in Alkaline secondary cells and
baterije batteries
SIST EN IEC 61960-4:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61960-4:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 61960-4:2020
EUROPEAN STANDARD EN IEC 61960-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 29.220.99
English Version
Secondary cells and batteries containing alkaline or other non-
acid electrolytes - Secondary lithium cells and batteries for
portable applications - Part 4: Coin secondary lithium cells, and
batteries made from them
(IEC 61960-4:2020)
Accumulateurs alcalins et autres accumulateurs à Sekundärzellen und -batterien mit alkalischen oder anderen
électrolyte non acide - Accumulateurs au lithium pour nichtsäurehaltigen Elektrolyten - Sekundäre Lithiumzellen
applications portables - Partie 4: Éléments et batteries und -batterien für tragbare Anwendungen - Teil 4:
d'accumulateurs boutons au lithium Sekundäre Lithiumknopfzellen und daraus hergestellte
(IEC 61960-4:2020) Batterien
(IEC 61960-4:2020)
This European Standard was approved by CENELEC on 2020-05-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61960-4:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61960-4:2020
EN IEC 61960-4:2020 (E)
European foreword
The text of document 21A/725/FDIS, future edition 1 of IEC 61960-4, prepared by SC 21A "Secondary
cells and batteries containing alkaline or other non-acid electrolytes" of IEC/TC 21 "Secondary cells
and batteries" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61960-4:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-25
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61960-4:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60051 (series) NOTE Harmonized as EN 60051 (series)
IEC 60086-1 NOTE Harmonized as EN 60086-1
IEC 60086-2 NOTE Harmonized as EN 60086-2
IEC 60086-3 NOTE Harmonized as EN 60086-3
IEC 60086-4:2019 NOTE Harmonized as EN IEC 60086-4:2019 (not modified)
IEC 61434 NOTE Harmonized as EN 61434
IEC 61959 NOTE Harmonized as EN 61959
IEC 61960-3 NOTE Harmonized as EN 61960-3
IEC 62133 (series) NOTE Harmonized as EN 62133 (series)
IEC 62281 NOT
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.