Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017)

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. This document considers only laboratory measurements.
The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354‑1 and ISO 12354‑2. However, the measured quantities Dn,f, Ln,f and Lne0,f only represent the performance with the dimensions for the test specimens described in this document.
ISO 10848-2:2017 is referred to in ISO 10848‑1:2017, 4.5 as being a supporting part of the frame document. It applies to Type B elements as defined in ISO 10848‑1, such as suspended ceilings, access floors, light uninterrupted façades or floating floors. The transmission from one room to another can occur simultaneously through the test element and via the plenum (if any). For measurements made according to this document, the total sound transmission is determined and it is not possible to separate the two kinds of transmission.

Akustik - Messung der Flankenübertragung von Luftschall, Trittschall und Schall von Gebäudetechnischen Anlagen zwischen benachbarten Räumen im Prüfstand und am Bau - Teil 2: Anwendung auf Typ B-Bauteile, wenn die Verbindung geringen Einfluss hat (ISO 10848-2:2017)

ISO 10848 legt Messverfahren zur Bestimmung der Flankenübertragung eines oder mehrerer Bauteile fest, die in dafür ausgelegten Prüfständen oder am Bau durchzuführen sind. In diesem Teil von ISO 10848 werden nur Messungen im Prüfstand betrachtet.
Die gemessenen Größen dürfen für den Vergleich unterschiedlicher Produkte oder für die Formulierung einer Anforderung oder als Eingangsdaten für Vorhersageverfahren wie ISO 12354 1 und ISO 12354 2 herangezogen werden. Die gemessenen Größen Dn,f, Ln,f und Lne0,f repräsentieren jedoch lediglich die Leistung in Abhängigkeit von den Maßen der in dieser Norm beschriebenen Probekörper.
Auf diesen Teil der ISO 10848 bezieht sich ISO 10848 1, 4.5, da er ein unterstützender Teil des Rahmen-dokuments ist. Er gilt für leichte Bauteile, wie Unterdecken, aufgeständerte Fußböden, leichte durchlaufende Fassaden oder schwimmende Fußböden, entsprechend der Definition in ISO 10848 1. Die Übertragung von einem Raum in einen anderen kann gleichzeitig durch das zu prüfende Bauteil und über den Hohlraum, sofern vorhanden, erfolgen. Bei nach diesem Teil der ISO 10848 durchgeführten Messungen wird die Gesamtschallübertragung ermittelt, und es ist nicht möglich, die beiden Übertragungsarten getrennt zu erfassen.

Acoustique - Mesurage en laboratoire et sur le terrain des transmissions latérales du bruit aérien, des bruits de choc et du bruit d'équipement technique de bâtiment entre des pièces - Partie 2: Application aux éléments de Type B lorsque la jonction a une faible influence (ISO 10848-2:2017)

L'ISO 10848 (toutes les parties) spécifie les méthodes de mesure pour la caractérisation des transmissions latérales d'un ou de plusieurs éléments de construction. Le présent document ne concerne que les mesurages en laboratoire.
Les grandeurs mesurées peuvent être utilisées pour comparer différents produits, pour exprimer une exigence ou comme données d'entrée des méthodes de prévision telles que l'ISO 12354‑1 et l'ISO 12354‑2. Cependant, les grandeurs mesurées Dn,f, Ln,f et Lne0,f ne représentent que la performance avec les dimensions des échantillons soumis à essai décrites dans le présent document.
L'ISO 10848‑1:2017, 4.5 fait référence au présent document, qui vient à l'appui du document cadre. Le présent document s'applique aux éléments de type B comme définis dans l'ISO 10848‑1, tels que plafonds suspendus, planchers techniques, façades légères continues ou planchers flottants. La transmission d'une salle à l'autre peut avoir lieu simultanément au travers de l'élément d'essai ou par l'intermédiaire de l'éventuel plénum. Pour les mesurages effectués conformément au présent document, la transmission acoustique globale est déterminée et il n'est pas possible de séparer les deux types de transmission.

Akustika - Laboratorijsko in terensko merjenje bočnega prenosa zvoka v zraku, udarnega zvoka in zvoka v gradbenih elementih servisne opreme med mejnimi prostori - 2. del: Uporaba elementov tipa B pri majhnem vplivu stikov (ISO 10848-2:2017)

ISO 10848 (vsi deli) določa merilne metode za opredelitev bočnega prenosa pri enem
ali več sestavnih delih stavb. Ta dokument obravnava samo laboratorijske meritve.
Izmerjene količine se lahko uporabijo za primerjavo različnih proizvodov, za izražanje zahteve ali kot vhodni podatki za metode napovedovanja (npr. ISO 12354-1 in ISO 12354-2). Vendar izmerjene količine Dn,f, Ln,f in Lne0,f označujejo zgolj lastnosti z dimenzijami za preskusne vzorce, opisane v tem dokumentu.
Ta dokument je naveden v standardu ISO 10848-1:2017, 4.5 kot podporni del okvirnega dokumenta.
Uporablja se za elemente tipa B, kot je opredeljeno v standardu ISO 10848-1 (npr. za viseče strope, votle pode, lahke neprekinjene fasade ali plavajoče pode). Prenos med prostori je lahko izveden hkrati skozi preskusni element in medprostor (če je na voljo). Za meritve v skladu s tem dokumentom se določi skupni prenos zvoka, obeh vrst prenosa pa ni mogoče ločiti.

General Information

Status
Published
Publication Date
24-Oct-2017
Withdrawal Date
29-Apr-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Oct-2017
Completion Date
25-Oct-2017

Relations

Buy Standard

Standard
EN ISO 10848-2:2018
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 10848-2:2016
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10848-2:2018
01-januar-2018
1DGRPHãþD
SIST EN ISO 10848-2:2006
SIST EN ISO 10848-2:2006/AC:2007
$NXVWLND/DERUDWRULMVNRLQWHUHQVNRPHUMHQMHERþQHJDSUHQRVD]YRNDY]UDNX
XGDUQHJD]YRNDLQ]YRNDYJUDGEHQLKHOHPHQWLKVHUYLVQHRSUHPHPHGPHMQLPL
SURVWRULGHO8SRUDEDHOHPHQWRYWLSD%SULPDMKQHPYSOLYXVWLNRY ,62

Acoustics - Laboratory and field measurement of flanking transmission for airborne,
impact and building service equipment sound between adjoining rooms - Part 2:
Application to Type B elements when the junction has a small influence (ISO 10848-
2:2017)
Akustik - Messung der Flankenübertragung von Luftschall, Trittschall und Schall von
Gebäudetechnischen Anlagen zwischen benachbarten Räumen im Prüfstand und am
Bau - Teil 2: Anwendung auf Typ B-Bauteile, wenn die Verbindung geringen Einfluss hat
(ISO 10848-2:2017)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10848-2:2018
Acoustique - Mesurage en laboratoire et sur le terrain des transmissions latérales du
bruit aérien, des bruits de choc et du bruit d'équipement technique de bâtiment entre des
pièces - Partie 2: Application aux éléments de Type B lorsque la jonction a une faible
influence (ISO 10848-2:2017)
Ta slovenski standard je istoveten z: EN ISO 10848-2:2017
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST EN ISO 10848-2:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 2 ----------------------

SIST EN ISO 10848-2:2018

---------------------- Page: 3 ----------------------

SIST EN ISO 10848-2:2018


EN ISO 10848-2
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2017
EUROPÄISCHE NORM
ICS 91.120.20 Supersedes EN ISO 10848-2:2006
English Version

Acoustics - Laboratory and field measurement of flanking
transmission for airborne, impact and building service
equipment sound between adjoining rooms - Part 2:
Application to Type B elements when the junction has a
small influence (ISO 10848-2:2017)
Acoustique - Mesurage en laboratoire et sur le terrain Akustik - Messung der Flankenübertragung von
des transmissions latérales du bruit aérien, des bruits Luftschall, Trittschall und Schall von
de choc et du bruit d'équipement technique de Gebäudetechnischen Anlagen zwischen benachbarten
bâtiment entre des pièces - Partie 2: Application aux Räumen im Prüfstand und am Bau - Teil 2: Anwendung
éléments de Type B lorsque la jonction a une faible auf Typ B-Bauteile, wenn die Verbindung geringen
influence (ISO 10848-2:2017) Einfluss hat (ISO 10848-2:2017)
This European Standard was approved by CEN on 2 August 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10848-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 4 ----------------------

SIST EN ISO 10848-2:2018
EN ISO 10848-2:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 5 ----------------------

SIST EN ISO 10848-2:2018
EN ISO 10848-2:2017 (E)
European foreword
This document (EN ISO 10848-2:2017) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 126 “
...

SLOVENSKI STANDARD
oSIST prEN ISO 10848-2:2016
01-december-2016
$NXVWLND/DERUDWRULMVNRLQWHUHQVNRPHUMHQMHERþQHJDSUHQRVD]YRNDY]UDNX
XGDUQHJD]YRNDLQ]YRNDYJUDGEHQLKHOHPHQWLKVHUYLVQHRSUHPHPHGPHMQLPL
SURVWRULGHO8SRUDEDODKNLKHOHPHQWRYWLSD%SULPDMKQHPYSOLYXVWLNRY
,62',6
Acoustics - Laboratory and field measurement of flanking transmission for airborne,
impact and building service equipment sound between adjoining rooms - Part 2:
Application to Type B elements when the junction has a small influence (ISO/DIS 10848-
2:2016)
Akustik - Messung der Flankenübertragung von Luftschall, Trittschall und Schall von
Gebäudetechnischen Anlagen zwischen benachbarten Räumen im Prüfstand und am
Bau - Teil 2: Anwendung auf Typ B-Bauteile, wenn die Verbindung geringen Einfluss hat
(ISO/DIS 10848-2:2016)
Acoustique - Mesurage en laboratoire des transmissions latérales du bruit aérien et des
bruits de choc entre des pièces adjacentes - Partie 2: Application aux éléments de Type
B lorsque la jonction a une faible influence (ISO/DIS 10848-2:2016)
Ta slovenski standard je istoveten z: prEN ISO 10848-2
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
oSIST prEN ISO 10848-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10848-2:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10848-2:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10848-2
ISO/TC 43/SC 2 Secretariat: DIN
Voting begins on: Voting terminates on:
2016-09-05 2016-11-27
Acoustics - Laboratory and field measurement of flanking
transmission for airborne, impact and building service
equipment sound between adjoining rooms —
Part 2:
Application to Type B elements when the junction has a
small influence
Acoustique — Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc
entre des pièces adjacentes —
Partie 2: Application aux éléments de Type B lorsque la jonction a une faible influence
ICS: 91.120.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10848-2:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10848-2:2016
ISO/DIS 10848-2:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10848-2:2016
ISO/DIS 10848-2:2016(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Instrumentation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.