Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures

This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:
-   hot rolled, structural steel products up to and including grade S700;
-   cold formed components and sheeting up to and including grade S700 (unless coming within the scope of prEN 1090-4);
-   hot finished or cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;
-   hot finished or cold formed structural hollow sections, including standard range and custom-made rolled products and hollow sections manufactured by welding.
For components produced from cold formed components, and cold formed structural hollow sections that are within the scope of prEN 1090-4, the requirements of prEN 1090-4 take precedence over corresponding requirements in this European Standard.
This European Standard can also be used for structural steel grades up to and including S960, provided that conditions for execution are verified against reliability criteria and any necessary additional requirements are specified.
This European Standard specifies requirements, which are mostly independent of the type and shape of the steel structure (e.g. buildings, bridges, plated or latticed components) including structures subjected to fatigue or seismic actions. Certain requirements are differentiated in terms of execution classes.
This European Standard applies to structures designed according to the relevant part of the EN 1993 series. Sheet piling, displacement piles and micropiles designed to EN 1993-5 are intended to be executed in accordance with respectively EN 12063, EN 12699 and EN 14199. This European Standard only applies to the execution of waling, bracing, and connections.
This European Standard applies to steel components in composite steel and concrete structures designed according to the relevant part of the EN 1994 series.
This European Standard can be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard includes the requirements for the welding of reinforcing steels to structural steels. This European Standard does not include requirements for the use of reinforcing steels for reinforced concrete applications.

Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln für die Ausführung von Stahltragwerken

Diese Europäische Norm legt Anforderungen an die Stahlbauausführung bei Tragwerken oder Bauteilen fest, die hergestellt sind aus:
-   warmgewalzten Baustahlerzeugnissen bis zur Sorte S700;
-   kaltgeformten Bauteilen und dünnwandigen Profilblechen bis zu Sorte S700 (außer innerhalb des Anwendungsbereichs von prEN 1090 4);
-   warmgeformten oder kaltgeformten austenitischen, austenitisch-ferritischen und ferritischen nicht-rostenden Stahlerzeugnissen;
-   warmgeformten oder kaltgeformten Hohlprofilen, einschließlich standardisierter und sondergefertigter Walzerzeugnisse sowie geschweißter Hohlprofile.
Bei Bauteilen aus kaltgeformten Komponenten und kaltgeformten Hohlprofilen, die im Anwendungsbereich von prEN 1090 4 liegen, haben die Anforderungen von prEN 1090 4 Vorrang vor den entsprechenden Anforderungen in dieser Europäischen Norm.
Diese Europäische Norm kann auch für Baustahlsorten bis zu S960 angewendet werden, unter der Voraus-setzung, dass die Ausführungsbedingungen im Hinblick auf die Zuverlässigkeitskriterien nach¬gewiesen sind und alle notwendigen Zusatzanforderungen festgelegt sind.
Diese Europäische Norm legt Anforderungen fest, die hauptsächlich unabhängig von der Art und Gestalt des Stahltragwerks sind (z. B. Hochbau, Brücken, Flächentragwerke oder Fachwerke), einschließlich Tragwerken unter Ermüdungs- oder Erdbebeneinwirkungen. Bestimmte Anforderungen werden in Form von Ausführungsklassen unterschieden.
Diese Europäische Norm gilt für Tragwerke, die nach dem entsprechenden Teil von EN 1993 bemessen wurden. Es ist vorgesehen, dass nach EN 1993 5 bemessene Spundwände, Verdrängungspfähle und Mikro-pfähle nach EN 12063, EN 12699 bzw. nach EN 14199 ausgeführt werden. Diese Europäische Norm gilt nur für die Ausführung von Gurtungen, Aussteifungen und Verbindungen.
Diese Europäische Norm gilt für Stahlbauteile in Verbundtragwerken aus Stahl und Beton, bei denen das Tragwerk nach dem entsprechenden Teil von EN 1994 bemessen wurde.
Diese Europäische Norm kann für Tragwerke verwendet werden, die mit anderen Bemessungsregeln bemessen wurden, unter der Voraussetzung, dass die Ausführungsbedingungen diesen Regeln entsprechen und alle notwendigen Zusatzanforderungen festgelegt sind.
Diese Europäische Norm enthält die Anforderungen an das Schweißen von Betonstahl an Baustahl. Diese Europäische Norm enthält keine Anforderungen an Betonstähle für Stahlbetonanwendungen.

Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences techniques pour les structures en acier

La présente Norme européenne spécifie des exigences pour l'exécution des charpentes en acier considérées en tant que structures ou éléments de structure fabriqués à partir de :
-   produits en acier de construction, laminés à chaud jusqu'à la nuance S700 incluse ;
-   éléments et plaques formés à froid jusqu'à la nuance S700 incluse (à moins qu'ils ne relèvent du champ d'application de l’EN 1090-4) ;
-   produits en acier inoxydable, austénitique, austéno-ferritique et ferritique, finis à chaud ou formés à froid ;
-   profils creux de construction finis à chaud ou formés à froid, comprenant les produits normalisés, ceux laminés à la demande et ceux fabriqués par soudage.
Pour les éléments produits à partir de composants formés à froid et les profils creux de construction formés à froid qui relèvent du domaine d'application de l’EN 1090-4, les exigences de l’EN 1090-4 prévalent sur les exigences correspondantes de la présente Norme Européenne.
La présente Norme Européenne peut être également utilisée pour les nuances d'acier de construction jusqu'à S960 incluse, sous réserve que les conditions d'exécution soient vérifiées en regard des critères de fiabilité et que toutes les exigences supplémentaires nécessaires soient spécifiées.
La présente Norme Européenne fixe des exigences qui sont, généralement, indépendantes du type et de la forme de la structure en acier (par exemple bâtiments, ponts, éléments en plaques ou en treillis), y compris pour les structures soumises à la fatigue ou à des actions sismiques. Certaines exigences sont différenciées en termes de classes d’exécution.
La présente Norme Européenne s'applique aux structures calculées selon la partie appropriée de l'EN 1993. L’exécution des pieux, des palplanches et des micro-pieux calculés selon l'EN 1993-5 doit être réalisée, respectivement, par référence à l’EN 12063, à l’EN 12699 et à l’EN 14199. La présente Norme Européenne n’est applicable qu’aux liernages, contreventements et assemblages.
La présente Norme Européenne s'applique aux éléments en acier des structures mixtes acier-béton calculées selon la partie appropriée de l'EN 1994.
La présente Norme Européenne peut être utilisée pour des structures calculées selon d'autres règles de calcul, sous réserve que les conditions d'exécution soient conformes à ces règles et que toutes les exigences supplémentaires nécessaires soient spécifiées.
La présente Norme Européenne contient les exigences relatives au soudage d'aciers d'armature sur des aciers de construction. La présente Norme Européenne n'inclut pas d’exigences quant à l’utilisation des aciers d'armature pour des applications de béton armé.

Izvedba jeklenih in aluminijastih konstrukcij - 2. del: Tehnične zahteve za izvedbo jeklenih konstrukcij

Ta evropski standard določa zahteve za izvedbo jeklenih konstrukcij v obliki konstrukcij ali sestavnih delov, proizvedenih iz vroče valjanih izdelkov iz konstrukcijskega jekla do razreda S690 (vključno z njim), hladno oblikovanih sestavnih delov in pločevine do razreda S700 (vključno z njim), vroče dodelanih in hladno oblikovanih izdelkov iz avstenitnega, avstenitno-feritnega ter feritnega nerjavnega jekla, vroče dodelanih in hladno oblikovanih konstrukcijskih votlih profilov, vključno s standardnimi ter po meri izdelanimi valjanimi izdelki in profili, proizvedenimi z varjenjem.

General Information

Status
Published
Publication Date
19-Jun-2018
Withdrawal Date
30-Dec-2018
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2023
Completion Date
02-Dec-2023

Relations

Buy Standard

Standard
EN 1090-2:2018 (EN)
English language
204 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 1090-2:2018 (DE)
German language
210 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1090-2:2015
English language
193 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1090-2:2017
English language
198 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1090-2:2018
01-december-2018
1DGRPHãþD
SIST EN 1090-2:2008+A1:2012
]DKWHYH]DL]YHGER,]YHGEDMHNOHQLKLQDOXPLQLMDVWLKNRQVWUXNFLMGHO7HKQLþQH
MHNOHQLKNRQVWUXNFLM
Execution of steel structures and aluminium structures - Part 2: Technical requirements
for steel structures
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln
für die Ausführung von Stahltragwerken
Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences
techniques pour les structures en acier
Ta slovenski standard je istoveten z: EN 1090-2:2018
ICS:
91.080.13 Jeklene konstrukcije Steel structures
SIST EN 1090-2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1090-2:2018

---------------------- Page: 2 ----------------------

SIST EN 1090-2:2018


EN 1090-2
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2018
EUROPÄISCHE NORM
ICS 91.080.13 Supersedes EN 1090-2:2008+A1:2011
English Version

Execution of steel structures and aluminium structures -
Part 2: Technical requirements for steel structures
Exécution des structures en acier et des structures en Ausführung von Stahltragwerken und
aluminium - Partie 2: Exigences techniques pour les Aluminiumtragwerken - Teil 2: Technische Regeln für
structures en acier die Ausführung von Stahltragwerken
This European Standard was approved by CEN on 22 January 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1090-2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1090-2:2018
EN 1090-2:2018 (E)
Contents Page
European foreword . 9
Introduction . 11
1 Scope . 12
2 Normative references . 12
2.1 Constituent products . 12
2.1.1 Steels. 12
2.1.2 Steel castings . 15
2.1.3 Welding consumables . 15
2.1.4 Mechanical fasteners . 16
2.1.5 High strength cables . 16
2.1.6 Structural bearings . 17
2.2 Preparation . 17
2.3 Welding .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln für die Ausführung von StahltragwerkenExécution des structures en acier et des structures en aluminium - Partie 2: Exigences techniques pour les structures en acierExecution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures91.080.13Jeklene konstrukcijeSteel structuresICS:Ta slovenski standard je istoveten z:EN 1090-2:2018SIST EN 1090-2:2018en,fr,de01-december-2018SIST EN 1090-2:2018SLOVENSKI
STANDARDSIST EN 1090-2:2008+A1:20121DGRPHãþD



SIST EN 1090-2:2018



EUROPÄISCHE NORM EUROPEAN STANDARD NORME EUROPÉENNE
EN 1090-2
Juni
t r s z ICS
{ sä r z rä s u Ersatz für EN
s r { ræ tã t r r z ªA sã t r s sDeutsche Fassung
Ausführung von Stahltragwerken und Aluminiumtragwerken æ Teil
tã Technische Regeln für die Ausführung von Stahltragwerken Execution of steel structures and aluminium structures æ Part
tã Technical requirements for steel structures
Exécution des structures en acier et des structures en aluminium æ Partie
tã Exigences techniques pour les structures en acier Diese Europäische Norm wurde vom CEN am
t tä Januar
t r s z angenommenä
ung zu erfüllená in der die Bedingungen festgelegt sindá unter denen dieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben istä Auf dem letzten Stand befindliche Listen dieser nationalen Normen mit ihren bibliographischen Angaben sind beim CENæCENELECæManagementæZentrum oder bei jedem CENæMitglied auf Anfrage erhältlichä
Spracheá die von einem CENæMitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem ManagementæZentrum mitgeteilt worden istá hat den gleichen Status wie die offiziellen Fassungenä
CENæMitglieder sind die nationalen Normungsinstitute von Belgiená Bulgariená Dänemarká Deutschlandá der ehemaligen jugoslawischen Republik Mazedoniená Estlandá Finnlandá Frankreichá Griechenlandá Irlandá Islandá Italiená Kroatiená Lettlandá Litauená Luxemburgá Maltaá den Niederlandená Norwegená Österreichá Polená Portugalá Rumäniená Schwedená der Schweizá Serbiená der Slowakeiá Sloweniená Spaniená der Tschechischen Republiká der Türkeiá Ungarná dem Vereinigten Königreich und Zypernä
EUROPÄISCHES KOMITEE FÜR NORMUNG EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
CEN-CENELEC Management-Zentrum:
Rue de la Science 23,
B-1040 Brüssel
9
t r s z CEN Alle Rechte der Verwertungá gleich in welcher Form und in welchem Verfahrená sind weltweit den nationalen Mitgliedern von CEN vorbehaltenä Refä Nrä EN
s r { ræ tã t r s z DSIST EN 1090-2:2018



EN 1090-2:2018 (D) 2 Inhalt
Seite Europäisches Vorwort . 8 Einleitung . 10 1 Anwendungsbereich . 11 2 Normative Verweisungen . 12 2.1 Ausgangsprodukte . 12 2.1.1 Stähle . 12 2.1.2 Stahlguss . 14 2.1.3 Schweißzusätze . 14 2.1.4 Mechanische Verbindungsmittel . 15 2.1.5 Hochfeste Zugglieder . 16 2.1.6 Lager im Bauwesen . 16 2.2 Bearbeitung . 16 2.3 Schweißen .
...

SLOVENSKI STANDARD
oSIST prEN 1090-2:2015
01-september-2015
,]YHGEDMHNOHQLKLQDOXPLQLMDVWLKNRQVWUXNFLMGHO7HKQLþQH]DKWHYH]DL]YHGER
MHNOHQLKNRQVWUXNFLM
Execution of steel structures and aluminium structures - Part 2: Technical requirements
for steel structures
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln
für die Ausführung von Stahltragwerken
Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences
techniques pour les structures en acier
Ta slovenski standard je istoveten z: prEN 1090-2
ICS:
91.080.10 Kovinske konstrukcije Metal structures
oSIST prEN 1090-2:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1090-2:2015

---------------------- Page: 2 ----------------------
oSIST prEN 1090-2:2015

EUROPEAN STANDARD
DRAFT
prEN 1090-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2015
ICS 91.080.10 Will supersede EN 1090-2:2008+A1:2011
English Version
Execution of steel structures and aluminium structures - Part 2:
Technical requirements for steel structures
Exécution des structures en acier et des structures en Ausführung von Stahltragwerken und Aluminiumtragwerken
aluminium - Partie 2: Exigences techniques pour les - Teil 2: Technische Regeln für die Ausführung von
structures en acier Stahltragwerken
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 135.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1090-2:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1090-2:2015
prEN 1090-2:2015 (E)
Contents Page
Foreword . 6
Introduction . 8
1 Scope . 9
2 Normative references . 10
2.1 General . 10
2.2 Constituent products . 10
2.3 Preparation . 15
2.4 Welding . 15
2.5 Testing . 17
2.6 Erection . 17
2.7 Co
...

SLOVENSKI STANDARD
oSIST prEN 1090-2:2017
01-marec-2017
,]YHGEDMHNOHQLKLQDOXPLQLMDVWLKNRQVWUXNFLMGHO7HKQLþQH]DKWHYH]DL]YHGER
MHNOHQLKNRQVWUXNFLM
Execution of steel structures and aluminium structures - Part 2: Technical requirements
for steel structures
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln
für die Ausführung von Stahltragwerken
Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences
techniques pour les structures en acier
Ta slovenski standard je istoveten z: prEN 1090-2
ICS:
91.080.13 Jeklene konstrukcije Steel structures
oSIST prEN 1090-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1090-2:2017

---------------------- Page: 2 ----------------------
oSIST prEN 1090-2:2017


DRAFT
EUROPEAN STANDARD
prEN 1090-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2017
ICS 91.080.10 Will supersede EN 1090-2:2008+A1:2011
English Version

Execution of steel structures and aluminium structures -
Part 2: Technical requirements for steel structures
Exécution des structures en acier et des structures en Ausführung von Stahltragwerken und
aluminium - Partie 2: Exigences techniques pour les Aluminiumtragwerken - Teil 2: Technische Regeln für
structures en acier die Ausführung von Stahltragwerken
This draft European Standard is submitted to CEN members for second enquiry. It has been drawn up by the Technical
Committee CEN/TC 135.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1090-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1090-2:2017
prEN 1090-2:2016 (E)
Contents Page
European foreword . 9
Introduction . 10
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 20
4 Specifications and documentation . 22
4.1 Execution Specification . 22
4.1.1 General. 22
4.1.2 Execution classes . 23
4.1.3 Requirements for surface preparation for corrosion protection . 23
4.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.