Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2018)

This document describes the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. This document covers upstream (including subsea), midstream and downstream facilities, petrochemical and associated activities. It focuses on production assurance of oil and gas production, processing and associated activities and covers the analysis of reliability and maintenance of the components. This includes a variety of business categories and associated systems/equipment in the oil and gas value chain. Production assurance addresses not only hydrocarbon production, but also associated activities such as drilling, pipeline installation and subsea intervention.
This document provides processes and activities, requirements and guidelines for systematic management, effective planning, execution and use of production assurance and reliability technology. This is to achieve cost-effective solutions over the life cycle of an asset development project structured around the following main elements:
—          production assurance management for optimum economy of the facility through all of its life cycle phases, while also considering constraints arising from health, safety, environment, and quality;
—          planning, execution and implementation of reliability technology;
—          application of reliability and maintenance data;
—          reliability-based technology development, design and operational improvement.
The IEC 60300-3 series addresses equipment reliability and maintenance performance in general.
This document designates 12 processes, of which seven are defined as core production assurance processes and addressed in this document. The remaining five processes are denoted as interacting processes and are outside the scope of this document. The interaction of the core production assurance processes with these interacting processes, however, is within the scope of this document as the information flow to and from these latter processes is required to ensure that production assurance requirements can be fulfilled.
The only requirement mandated by this document is the establishment and execution of the production assurance programme (PAP). It is important to reflect the PAP in the overall project management in the project for which it applies.
This document recommends that the listed processes and activities be initiated only if they can be considered to add value.

Erdöl-, petrochemische und Erdgasindustrie - Betriebsoptimierung und Zuverlässigkeitsmanagement (ISO 20815:2018)

Industries du pétrole, de la pétrochimie et du gaz naturel - Assurance production et gestion de la fiabilité (ISO 20815:2018)

Le présent document introduit le concept d'assurance production dans les systèmes et les opérations liés au forage, à l'exploitation, au traitement et au transport des ressources pétrolières, pétrochimiques et en gaz naturel. Le présent document couvre les installations et les activités amont (y compris sous-marines), intermédiaires et aval, la pétrochimie ainsi que les activités associées. Il est axé sur l'assurance production relative à la production du pétrole et du gaz, sur le traitement et les opérations associées et couvre l'analyse de la fiabilité et de la maintenance des composants. Cela comprend une variété de catégories d'activité et de systèmes/équipements associés au sein de la chaîne de valeur du gaz et du pétrole. L'assurance production concerne non seulement la production des hydrocarbures, mais également les activités associées telles que le forage, l'installation de conduites et les interventions sous-marines.
Le présent document fournit des processus et des activités, des exigences et des lignes directrices pour la gestion systématique, la planification, l'exécution et l'utilisation efficaces de l'assurance production et des techniques fiabilistes. Le but est d'obtenir des solutions rentables sur tout le cycle de vie d'un projet de développement d'une installation de production structurée autour des éléments principaux suivants:
—          gestion de l'assurance production pour une économie optimale de l'installation durant toutes les phases de son cycle de vie, tout en tenant compte des contraintes résultant de facteurs liés à la santé, à la sécurité, à l'environnement et à la qualité;
—          planification, exécution et mise en œuvre des techniques fiabilistes;
—          application des données de fiabilité et de maintenance;
—          amélioration du développement, de la conception et de l'exploitation de technologies basées sur la fiabilité.
La série IEC 60300-3 a trait à la fiabilité des équipements et à l'exécution de la maintenance.
Le présent document définit douze processus, dont sept sont définis comme des processus fondamentaux de l'assurance production et sont abordés dans le présent document. Les cinq processus restants sont appelés processus en interaction et ne relèvent pas du domaine d'application du présent document. L'interaction des processus fondamentaux de l'assurance production avec ces processus interactifs s'inscrit toutefois dans le domaine d'application du présent document car le flux d'informations à destination et en provenance de ces derniers processus est requis pour s'assurer que les exigences de l'assurance production peuvent être remplies.
La seule exigence spécifiée par le présent document concerne l'établissement et l'exécution du programme d'assurance production (PAP). Il est important que le PAP se reflète dans la gestion globale du projet auquel il s'applique.
Le présent document recommande de ne lancer les processus et activités qu'il énumère que s'ils peuvent apporter de la valeur ajoutée.

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Optimizacija proizvodnje in upravljanje zanesljivosti (ISO 20815:2018)

Ta dokument opisuje koncept zagotavljanja proizvodnje v sistemih in operacijah, povezanih z raziskovalnim vrtanjem, izkoriščanjem, predelavo in prevozom nafte ter petrokemičnih virov in virov zemeljskega plina. Ta dokument zajema objekte geoloških raziskav in proizvodnje (vključno s podvodnimi), transporta, predelave in trženja nafte oziroma zemeljskega plina ter petrokemične in z njimi povezane dejavnosti. Osredotoča se na zagotavljanje proizvodnje nafte in plina, predelavo in s tem povezane dejavnosti ter zajema analizo zanesljivosti in vzdrževanja komponent. To vključuje različne poslovne kategorije in pripadajoče sisteme/opremo v vrednostni verigi nafte in zemeljskega plina. Zagotavljanje proizvodnje se ne nanaša samo na proizvodnjo ogljikovodikov, temveč tudi na povezane dejavnosti, kot so vrtanje, namestitev cevovodov in podvodni posegi. Ta dokument vsebuje postopke in dejavnosti, zahteve in smernice za sistematično upravljanje, učinkovito načrtovanje, izvajanje ter uporabo tehnologije za optimizacijo in zanesljivost proizvodnje. S tem se želi doseči stroškovno učinkovite rešitve v celotnem življenjskem ciklu projekta razvoja sredstev, oblikovanega na podlagi teh glavnih elementov:
– upravljanje optimizacije proizvodnje za optimalno ekonomičnost objekta skozi vse faze njegovega življenjskega cikla ob upoštevanju omejitev v zvezi z zdravjem, varnostjo, okoljem in kakovostjo;
– načrtovanje, izvajanje in uvajanje tehnologije zanesljivosti;
– uporaba podatkov o zanesljivosti in vzdrževanju;
– razvoj, projektiranje in izboljšanje delovanja na podlagi zanesljivosti.
Skupina standardov IEC 60300-3 obravnava zanesljivost in vzdrževanje opreme na splošno. Ta dokument opredeljuje 12 procesov, od katerih jih je sedem opredeljenih kot procesi optimizacije temeljne proizvodnje. Preostalih pet procesov je označenih kot medsebojno delujoči procesi in so zunaj področja uporabe tega dokumenta. Vzajemno delovanje procesov optimizacije temeljne proizvodnje s temi interakcijskimi procesi pa je zajeto v tem dokumentu, saj je za izpolnjevanje zahtev optimizacije proizvodnje potreben pretok informacij do teh procesov in iz njih.
Edina zahteva, določena v tem dokumentu, je vzpostavitev in izvajanje programa optimizacije proizvodnje (PAP). Pomembno je, da se program optimizacije proizvodnje odraža v celotnem vodenju projekta, za katerega se uporablja.
Ta dokument priporoča, da se navedeni procesi in aktivnosti začnejo izvajati le, če projektu lahko zagotovijo dodano vrednost.

General Information

Status
Published
Publication Date
27-Nov-2018
Withdrawal Date
30-May-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
28-Nov-2018
Completion Date
28-Nov-2018

Relations

Buy Standard

Standard
EN ISO 20815:2019 - BARVE
English language
107 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 20815:2017
English language
101 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20815:2019
01-februar-2019
1DGRPHãþD
SIST EN ISO 20815:2010
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
2SWLPL]DFLMDSURL]YRGQMHLQXSUDYOMDQMH]DQHVOMLYRVWL ,62
Petroleum, petrochemical and natural gas industries - Production assurance and
reliability management (ISO 20815:2018)
Erdöl-, petrochemische und Erdgasindustrie - Betriebsoptimierung und
Zuverlässigkeitsmanagement (ISO 20815:2018)
Industries du pétrole, de la pétrochimie et du gaz naturel - Assurance de la production et
management de la fiabilité (ISO 20815:2018)
Ta slovenski standard je istoveten z: EN ISO 20815:2018
ICS:
03.100.01 Organizacija in vodenje Company organization and
podjetja na splošno management in general
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
SIST EN ISO 20815:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20815:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 20815:2019


EN ISO 20815
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2018
EUROPÄISCHE NORM
ICS 75.180.01; 75.200 Supersedes EN ISO 20815:2010
English Version

Petroleum, petrochemical and natural gas industries -
Production assurance and reliability management (ISO
20815:2018)
Industries du pétrole, de la pétrochimie et du gaz Erdöl-, petrochemische und Erdgasindustrie -
naturel - Assurance de la production et management de Betriebsoptimierung und Zuverlässigkeitsmanagement
la fiabilité (ISO 20815:2018) (ISO 20815:2018)
This European Standard was approved by CEN on 7 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20815:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20815:2019
EN ISO 20815:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20815:2019
EN ISO 20815:2018 (E)
European foreword
This document (EN ISO 20815:2018) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2019, and conflicting national standards shall be
withdrawn at the latest by May 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20815:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain
...

SLOVENSKI STANDARD
oSIST prEN ISO 20815:2017
01-september-2017
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
2SWLPL]DFLMDSURL]YRGQMHLQXSUDYOMDQMH]DQHVOMLYRVWL ,62',6
Petroleum, petrochemical and natural gas industries - Production assurance and
reliability management (ISO/DIS 20815:2017)
Erdöl-, petrochemische und Erdgasindustrie - Betriebsoptimierung und
Zuverlässigkeitsmanagement (ISO/DIS 20815:2017)
Industries du pétrole, de la pétrochimie et du gaz naturel - Assurance de la production et
management de la fiabilité (ISO/DIS 20815:2017)
Ta slovenski standard je istoveten z: prEN ISO 20815
ICS:
03.100.01 Organizacija in vodenje Company organization and
podjetja na splošno management in general
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
oSIST prEN ISO 20815:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 20815:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 20815:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20815
ISO/TC 67 Secretariat: NEN
Voting begins on: Voting terminates on:
2017-07-26 2017-10-17
Petroleum, petrochemical and natural gas industries —
Production assurance and reliability management
Industries du pétrole, de la pétrochimie et du gaz naturel — Assurance de la production et management de
la fiabilité
ICS: 75.180.01; 75.200
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20815:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 20815:2017
ISO/DIS 20815:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 20815:2017
ISO/DIS 20815:2017(E)
Contents
Foreword . vii
Introduction. viii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions. 2
3.2 Abbreviations . 15
4 Production assurance and decision support . 17
4.1 Users of this International Standard . 17
4.2 Framework conditions . 17
4.3 Optimization process .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.