iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1992-1-1:2004/A1:2014

(Amendment)

Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings

Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings

General rules for the structural design of buildings and civil engineering works in reinforced and prestressed concrete made with normal and lightweight aggregates, plain or lightly reinforced concrete and precast concrete for the design of reinforced concrete components with unbonded tendons.

Eurocode 2: Bemessung und Konstruktion von Stahlbeton- und Spannbetontragwerken - Teil 1-1: Allgemeine Bemessungsregeln und Regeln für den Hochbau

Eurocode 2: Calcul des structures en béton - Partie 1-1: Règles générales et règles pour les bâtiments

N/A

Evrokod 2: Projektiranje betonskih konstrukcij - 1-1. del: Splošna pravila in pravila za stavbe

General Information

Status
Withdrawn
Publication Date
16-Dec-2014
Withdrawal Date
21-Nov-2023
ICS
91.010.30 - Technical aspects
91.080.40 - Concrete structures
Technical Committee
CEN/TC 250 - Structural Eurocodes
Drafting Committee
CEN/TC 250/SC 2 - Eurocode 2: Design of concrete structures
Current Stage
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/265 - Mandate to CEN for the conversion of the Eurocodes from ENV into EN concerning the structural and geotechnical design of buildings and civil engineering works
Ref Project
SIST EN 1992-1-1:2005/A1:2015 - Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings

Relations

Replaced By
EN 1992-1-1:2023 - Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
Effective Date
29-Nov-2023
Amends
EN 1992-1-1:2004 - Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
Effective Date
03-Jul-2013

Buy Standard

EN 1992-1-1:2005/A1:2015EN 1992-1-1:2005/A1:2015
PreviousNext
Amendment
EN 1992-1-1:2005/A1:2015
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1992-1-1:2005/A1:2015
01-marec-2015
Evrokod 2: Projektiranje betonskih konstrukcij - 1-1. del: Splošna pravila in pravila
za stavbe
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for
buildings
Eurocode 2: Bemessung und Konstruktion von Stahlbeton- und Spannbetontragwerken -
Teil 1-1: Allgemeine Bemessungsregeln und Regeln für den Hochbau
Eurocode 2: Calcul des structures en béton - Partie 1-1: Règles générales et règles pour
les bâtiments
Ta slovenski standard je istoveten z: EN 1992-1-1:2004/A1:2014
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
91.080.40 Betonske konstrukcije Concrete structures
SIST EN 1992-1-1:2005/A1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1992-1-1:2005/A1:2015

---------------------- Page: 2 ----------------------

SIST EN 1992-1-1:2005/A1:2015

EUROPEAN STANDARD
EN 1992-1-1:2004/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2014
ICS 91.010.30; 91.080.40
English Version
Eurocode 2: Design of concrete structures - Part 1-1: General
rules and rules for buildings
Eurocode 2: Calcul des structures en béton - Partie 1-1: Eurocode 2: Bemessung und Konstruktion von Stahlbeton-
Règles générales et règles pour les bâtiments und Spannbetontragwerken - Teil 1-1: Allgemeine
Bemessungsregeln und Regeln für den Hochbau
This amendment A1 modifies the European Standard EN 1992-1-1:2004; it was approved by CEN on 8 November 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1992-1-1:2004/A1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1992-1-1:2005/A1:2015
EN 1992-1-1:2004/A1:2014 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to 3.3.2, Properties .4
3 Modification to 3.3.4, Ductility characteristics .4
4 Modification to 6.4.5, Punching shear resistance of slabs and column bases with shear
reinforcement .4
5 Modification to 11.6.4.2, Punching shear resistance of slabs or column bases with shear
reinforcement .5
6 Modification to 12.6.5.2, Simplified design method for walls and columns .5
7 Modification to H.1.2, Bracing system without significant shear deformations .6

2

---------------------- Page: 4 ----------------------

SIST EN 1992-1-1:2005/A1:2015
EN 1992-1-1:2004/A1:2014 (E)
Foreword
This document (EN 1992-1-1:2004/A1:2014) has been prepared by Technical Committee CEN/TC 250
“Structural Eurocodes”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 1992-1-1:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2015, and
conflicting national standards shall be wit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1992-1-2:2023(Main)
Eurocode 2 - Design of concrete structures – Part 1-2: Structural fire design
SIST EN 1992-1-2:2024

1.1   Scope of prEN 1992 1 2
(1)   This document deals with the design of concrete structures for the accidental situation of fire exposure and is intended to be used in conjunction with prEN 1992 1 1 and EN 1991 1 2. This document identifies differences from, or supplements to, normal temperature design.
(2)   This document applies to concrete structures required to fulfil a loadbearing function, separating function or both.
(3)   This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance.
(4)   This document applies to structures, or parts of structures, that are within the scope of prEN 1992 1 1 and are designed accordingly.
(5)   The methods given in this document are applicable to normal weight concrete up to strength class C100/115 and lightweight concrete up to strength class LC50/60.
1.2   Assumptions
(1)   In addition to the general assumptions of prEN 1990 the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1992-1-1:2023(Main)
Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
SIST EN 1992-1-1:2024

1.1    Scope of FprEN 1992-1-1
(1)   This document gives the general basis for the design of structures in plain, reinforced and prestressed concrete made with normal weight, lightweight and heavyweight aggregates. It gives specific rules for buildings, bridges and civil engineering structures, including temporary structures; additional requirements specific to bridges are given in Annex K. The rules are valid under temperature conditions between −40 °C and +100 °C generally. This document complies with the principles and requirements for the safety, serviceability, durability and robustness of structures, the basis of their design and verification that are given in EN 1990.
(2)   This document is only concerned with the requirements for resistance, serviceability, durability, robustness and fire resistance of concrete structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.
(3)    This document does not cover:
-   resistance to fire (see EN 1992 1 2);
-   fastenings in concrete (see EN 1992 4);
-   seismic design (see EN 1998 (all parts));
-   particular aspects of special types of civil engineering works (such as dams, pressure vessels);
-   structures made with no-fines concrete, aerated or cellular concrete, lightweight aggregate concrete with open structure components;
-   structures containing steel sections considered in design (see EN 1994 (all parts)) for composite steel and concrete structures;
-   structural parts made of concrete with a smallest value of the upper sieve aggregate size Dlower < 8 mm (or if known Dmax < 8 mm) unless otherwise stated in this Eurocode.
1.2   Assumptions
(1)   The assumptions of EN 1990 apply to FprEN 1992-1-1.
(2)   It is assumed that the requirements for execution and workmanship given in EN 13670 are complied with.

  • Standard
    402 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 19103:2021(Main)
Eurocode 5: Design of Timber Structures - Structural design of timber-concrete composite structures - Common rules and rules for buildings
SIST-TS CEN/TS 19103:2022

1.1   Scope of CEN/TS 19103
(1)   CEN/TS 19103 gives general design rules for timber-concrete composite structures.
(2)   It provides requirements for materials, design parameters, connections, detailing and execution for timber-concrete composite structures. Recommendations for environmental parameters (temperature and moisture content), design methods and test methods are given in the Annexes.
(3)   It includes rules common to many types of timber-concrete composite, but does not include details for the design of glued timber-concrete composites, nor for bridges.
NOTE   For the design of glued timber-concrete composites or bridges alternative references are available.
(4)   It covers the design of timber-concrete composite structures in both quasi-constant and variable environmental conditions. For ease of use, it provides simple design rules for quasi-constant environmental conditions and more complex rules for variable environmental conditions.
1.2   Assumptions
(1)   The general assumptions of EN 1990 apply.
(2)   CEN/TS 19103 is intended to be used in conjunction with EN 1990, EN 1991 (all parts), EN  1992 (all parts), EN  1994 (all parts), EN 1995 (all parts), EN 1998 (all parts) when timber structures are built in seismic regions, and ENs for construction products relevant to timber structures.

  • Technical specification
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1992-4:2018(Main)
Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete
SIST EN 1992-4:2018

1.1   General
(1) This European Standard provides a design method for fastenings (connection of structural elements and non-structural elements to structural components), which are used to transmit actions to the concrete. This design method uses physical models which are based on a combination of tests and numerical analysis consistent with EN 1990:2002, 5.2.
The requirements for the transmission of the fastener loads within the concrete member to its supports are given in EN 1992-1-1 and Annex A of this EN.
Inserts embedded in precast concrete elements during production, under Factory Production Control (FPC) conditions and with the due reinforcement, intended for use only during transient situations for lifting and handling, are covered by CEN/TR 15728.
(2) This EN is intended for safety related applications in which the failure of fastenings may result in collapse or partial collapse of the structure, cause risk to human life or lead to significant economic loss. In this context it also covers non-structural elements.
(3) The support of the fixture can be either statically determinate or statically indeterminate. Each support can consist of one fastener or a group of fasteners.
(4) This EN is valid for applications which fall within the scope of the EN 1992 series. In applications where special considerations apply, e.g. nuclear power plants or civil defence structures, modifications can be necessary.
(5) This EN does not cover the design of the fixture. The requirements for the design of the fixture are given in the appropriate Standards and fulfil the requirements on the fixture as given in this EN.
(6) This document relies on characteristic resistances and distances which are stated in a European Technical Product Specification (see Annex E). At least the characteristics of Annex E are given in a European Technical Product Specification for the corresponding loading conditions providing a basis for the design methods of this EN.
NOTE   The numerical values for certain parameters given in Notes can be used for pre-dimensioning. The values for verification are given in the European Technical Product Specifications and may be different.
1.2   Type of fasteners and fastening groups
(1)   This EN uses the fastener design theory ) (see Figure 1.1) and applies to:
a)   cast-in fasteners such as headed fasteners, anchor channels with rigid connection (e.g. welded, forged) between anchor and channel;
b)   post-installed mechanical fasteners such as expansion fasteners, undercut fasteners and concrete screws;
c)   post-installed bonded fasteners and bonded expansion fasteners.
(2)   For other types of fasteners modifications of the design provisions can be necessary.
(3)   This EN applies to fasteners with established suitability for the specified application in concrete covered by provisions, which refer to this EN and provide data required by this EN. The suitability of the fastener is stated in the relevant European Technical Product Specification.
(...)
(4)   This EN applies to single fasteners and groups of fasteners. In a group of fasteners the loads are applied to the individual fasteners of the group by means of a common fixture. In a group of fasteners this European Standard applies only if fasteners of the same type and size are used.
(5)   The configurations of fastenings with cast-in place headed fasteners and post-installed fasteners covered by this EN are shown in Figure 1.2.
(6)   For anchor channels the number of anchors is not limited.
(...)
(7)   Post-installed ribbed reinforcing bars used to connect concrete members are covered by a European Technical Product Specification. This EN applies when connections are designed in accordance with EN 1992-1-1.
1.3   Fastener dimensions and materials
(1)   This EN applies to fasteners with a minimum diameter or a minimum thread size of 6 mm (M6) or a corresponding cross section. (....)

  • Standard
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1994-1-2:2005/A1:2014(Amendment)
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
SIST EN 1994-1-2:2006/A1:2014

Supplementary to Part 1-1. Additional and varied rules to be used for the design of composite structures which are required to avoid premature structural collapse and to limit the spread of fire in the accidental situation of exposure to fire.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1994-1-1:2004/AC:2009(Corrigendum)
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
SIST EN 1994-1-1:2005/AC:2009

TC - Editorial and technical modifications to Foreword, Clauses 1, 3, 4, 5, 6, 9 and Annex B.
2013: Originator of XML version: first setup pilot of CCMC in 2012

  • Corrigendum
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1994-2:2005/AC:2008(Corrigendum)
Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rules and rules for bridges
SIST EN 1994-2:2005/AC:2008

TC - Correction of references (footnotes to text), changes of references in national annexes, improvement of wording and replacement of Figure C.1
2013: Originator of XML version: first setup pilot of CCMC in 2012

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1994-1-2:2005/AC:2008(Corrigendum)
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
SIST EN 1994-1-2:2006/AC:2008

TC - Correction of references in national annexes, typographical improvement, change of equation in 4.3.5.1 and Annex C and E.2, designation in Table D.6 corrected
2013: Originator of XML version: first setup pilot of CCMC in 2012

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1994-2:2005(Main)
Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
SIST EN 1994-2:2005

(1) Part 2 of Eurocode 4 gives design rules for steel-concrete composite bridges or members of bridges, additional to the general rules in EN 1994-1-1. Cable stayed bridges are not fully covered by this part.
(2) The following subjects are dealt with in Part 2:
Section 1:   General
Section 2:   Basis of design
Section 3:   Materials
Section 4:   Durability
Section 5:   Structural analysis
Section 6:   Ultimate limit states
Section 7:   Serviceability limit states
Section 8:   Decks with precast concrete slabs
Section 9:   Composite plates in bridges
(3) Provisions for shear connectors are given only for welded headed studs.
NOTE: Reference to guidance for other types as shear connectors may be given in the National Annex.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1994-1-2:2005(Main)
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
SIST EN 1994-1-2:2006

Supplementary to Part 1-1. Additional and varied rules to be used for the design of composite structures which are required to avoid premature structural collapse and to limit the spread of fire in the accidental situation of exposure to fire.

  • Standard
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day