Sharps injury protection - Requirements and test methods - Part 1: Single-use sharps containers (ISO 23907-1:2019)

This document specifies requirements for single-use sharps containers intended to hold potentially hazardous sharps medical waste with or without sharps protection features, e.g. scalpel blades, trocars, hypodermic needles and syringes.
It is applicable to single-use sharps containers that are supplied complete by the manufacturer and to those that are supplied as components intended to be assembled by the user.
It is not applicable to reusable sharps containers or to the outer containers used in the transportation of filled single-use sharps containers.

Schutz vor Stich- und Schnittverletzung - Anforderungen und Prüfverfahren - Teil 1: Einmalbehälter für spitze und scharfe Abfälle (ISO 23907-1:2019)

Dieses Dokument legt Anforderungen an Einmalbehälter für spitze und scharfe Abfälle fest, die zum Aufnehmen potentiell gefährlicher spitzer und scharfer medizinischer Abfälle mit oder ohne Schutzvorrich-tungen gegen Stich  und Schnittverletzungen vorgesehen sind, z. B. Skalpellklingen, Trokare, Injektions-nadeln und Spritzen.
Es ist anwendbar sowohl auf Einmalbehälter für spitze und scharfe Abfälle, die vom Hersteller komplett montiert geliefert werden, als auch auf Behälter, die in Einzelteilen geliefert werden und durch den Benutzer zusammenzusetzen sind.
Es ist nicht anwendbar auf wiederverwendbare Behälter für spitze und scharfe Abfälle oder auf äußere Behälter, die zum Transport gefüllter Einmalbehälter für spitze und scharfe Abfälle verwendet werden.

Protection contre les blessures par perforants - Exigences et méthodes d'essai - Partie 1: Conteneurs à usage unique pour objets piquants ou coupants (ISO 23907-1:2019)

Le présent document spécifie les exigences relatives aux conteneurs à usage unique pour objets piquants ou coupants conçus pour contenir des objets pointus, perforants ou tranchants à usage médical, potentiellement dangereux et destinés à être éliminés, qu'ils soient munis ou non de dispositifs de protection contre les blessures, tels par exemple les lames de scalpels, les trocarts, les aiguilles et seringues hypodermiques.
Il s'applique aux conteneurs à usage unique pour objets coupants, tranchants et perforants fournis à l'état de produit fini par le fabricant ainsi que des conteneurs pour objets coupants, tranchants et perforants fournis sous forme de composants à assembler par l'utilisateur.
Il ne s'applique pas aux conteneurs pour objets piquants ou coupants réutilisables ni aux conteneurs de suremballage utilisés pour le transport des conteneurs à usage unique remplis.

Zaščita pred poškodbami z ostrimi predmeti - Zahteve in preskusne metode - 1. del: Vsebniki za ostre predmete za enkratno uporabo (ISO 23907-1:2019)

Ta dokument določa zahteve za vsebnike za ostre predmete za enkratno uporabo, namenjene potencialno nevarnim ostrim medicinskim odpadkom z zaščito ali brez, npr. rezilom skalpela, trokarjem, hipodermičnim iglam in brizgalkam.
Uporablja se za vsebnike za ostre predmete za enkratno uporabo, ki jih proizvajalec dobavi pripravljene za uporabo, in tiste, ki so dobavljeni kot sestavni deli, ki jih sestavi uporabnik.
Ne uporablja se za vsebnike za ostre predmete za večkratno uporabo ali druge zunanje vsebnike, ki se uporabljajo pri transportu napolnjenih vsebnikov za ostre predmete za enkratno uporabo.

General Information

Status
Published
Publication Date
12-Feb-2019
Withdrawal Date
28-Feb-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-Feb-2019
Completion Date
13-Feb-2019

Relations

Buy Standard

Standard
EN ISO 23907-1:2019
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 23907-1:2017
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 23907-1:2019
01-april-2019
1DGRPHãþD
SIST EN ISO 23907:2012
=DãþLWDSUHGSRãNRGEDPL]RVWULPLSUHGPHWL=DKWHYHLQSUHVNXVQHPHWRGH
GHO9VHEQLNL]DRVWUHSUHGPHWH]DHQNUDWQRXSRUDER ,62
Sharps injury protection - Requirements and test methods - Part 1: Single-use sharps
containers (ISO 23907-1:2019)
Schutz vor Stich- und Schnittverletzung - Anforderungen und Prüfverfahren - Teil 1:
Einmalbehälter für spitze und scharfe Abfälle (ISO 23907-1:2019)
Protection contre les blessures par perforants - Exigences et méthodes d'essai - Partie
1: Conteneurs à usage unique pour objets piquants ou coupants (ISO 23907-1:2019)
Ta slovenski standard je istoveten z: EN ISO 23907-1:2019
ICS:
11.040.99 Druga medicinska oprema Other medical equipment
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
SIST EN ISO 23907-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 23907-1:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 23907-1:2019


EN ISO 23907-1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2019
EUROPÄISCHE NORM
ICS 11.040.99 Supersedes EN ISO 23907:2012
English Version

Sharps injury protection - Requirements and test methods
- Part 1: Single-use sharps containers (ISO 23907-1:2019)
Protection contre les blessures par perforants - Schutz vor Stich- und Schnittverletzung -
Exigences et méthodes d'essai - Partie 1: Conteneurs à Anforderungen und Prüfverfahren - Teil 1:
usage unique pour objets piquants ou coupants (ISO Einmalbehälter für spitze und scharfe Abfälle (ISO
23907-1:2019) 23907-1:2019)
This European Standard was approved by CEN on 21 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23907-1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 23907-1:2019
EN ISO 23907-1:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 23907-1:2019
EN ISO 23907-1:2019 (E)
European foreword
This document (EN ISO 23907-1:2019) has been prepared by Technical Committee ISO/TC 84 "Devices
for administration of medicinal products and catheters" in collaboration with Technical Committee
CEN/TC 205 “Non-active medical devices” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall
be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 23907:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the
...

SLOVENSKI STANDARD
oSIST prEN ISO 23907-1:2017
01-december-2017
=DãþLWDSUHGSRãNRGEDPL]RVWULPLSUHGPHWL=DKWHYHLQSUHVNXVQHPHWRGH
GHO9VHEQLNL]DRVWUHSUHGPHWH]DHQNUDWQRXSRUDER ,62',6
Sharps injury protection - Requirements and test methods - Part 1: Single-use sharps
containers (ISO/DIS 23907-1:2017)
Schutz vor Stich- und Schnittverletzung - Anforderungen und Prüfverfahren - Teil 1:
Einmalbehälter für spitze und scharfe Abfälle (ISO/DIS 23907-1:2017)
Protection contre les blessures par perforants - Exigences et méthodes d'essai - Partie
1: Conteneurs pour objets coupants, tranchants et perforants (ISO/DIS 23907-1:2017)
Ta slovenski standard je istoveten z: prEN ISO 23907-1
ICS:
11.040.99 Druga medicinska oprema Other medical equipment
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
oSIST prEN ISO 23907-1:2017 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 23907-1:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 23907-1:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23907-1
ISO/TC 84 Secretariat: DS
Voting begins on: Voting terminates on:
2017-10-04 2017-12-27
Sharps injury protection — Requirements and test
methods —
Part 1:
Single-use sharps containers
Protection contre les blessures par perforants — Exigences et méthodes d’essai —
Partie 1: Conteneurs pour objets coupants, tranchants et perforants
ICS: 11.040.99
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 23907-1:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 23907-1:2017
ISO/DIS 23907-1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 23907-1:2017
ISO/DIS 23907-1:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 3
4.1 General . 3
4.2 Construction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.