Protective garments for motorcycle riders - Part 4: Class A garments - Requirements

This document specifies general requirements for motorcyclists’ protective garments of Class A: protective garments, which are intended to provide limited protection to the wearer against abrasion and impact injury. It applies to protective garments for motorcycle on-road.

Motorradfahrerschutzkleidung - Teil 4: Kleidungsstücke der Klasse A - Anforderungen

Dieses Dokument legt allgemeine Anforderungen an Motorradfahrerschutzkleidung der Klasse A fest, die dafür vorgesehen ist, dem Träger einen begrenzten Schutz vor Verletzungen durch Abrieb und Aufprall zu bieten. Es gilt für Schutzkleidung bei der Benutzung von Motorrädern auf der Straße.

Vêtements de protection pour les motocyclistes - Partie 4 : Vêtements de classe A - Exigences

Le présent document spécifie les exigences générales relatives aux vêtements avec un niveau de protection léger (Classe A) pour les motocyclistes, à savoir des vêtements de protection prévus pour offrir aux personnes qui les portent une protection limitée contre les blessures provoquées par l’abrasion et les chocs. Il s’applique aux vêtements de protection pour les activités motocyclistes pratiquées sur la route.

Varovalna obleka za voznike motornih koles - 4. del: Oblačila razreda A - Zahteve

General Information

Status
Published
Publication Date
25-Feb-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Feb-2020
Due Date
28-Apr-2019
Completion Date
26-Feb-2020

Relations

Buy Standard

Standard
EN 17092-4:2020
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17092-4:2017
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17092-4:2020
01-maj-2020
Nadomešča:
SIST EN 13595-1:2002
SIST EN 13595-2:2003
SIST EN 13595-3:2002
SIST EN 13595-4:2002
Varovalna obleka za voznike motornih koles - 4. del: Oblačila razreda A - Zahteve
Protective garments for motorcycle riders - Part 4: Class A garments - Requirements
Motorradfahrerschutzkleidung - Teil 4: Kleidungsstücke der Klasse A - Anforderungen
Vêtements de protection pour les motocyclistes - Partie 4 : Vêtements de classe A -
Exigences
Ta slovenski standard je istoveten z: EN 17092-4:2020
ICS:
13.340.10 Varovalna obleka Protective clothing
43.140 Motorna kolesa in mopedi Motorcycles and mopeds
SIST EN 17092-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17092-4:2020

---------------------- Page: 2 ----------------------
SIST EN 17092-4:2020


EN 17092-4
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 13.340.10 Supersedes EN 13595-1:2002, EN 13595-2:2002, EN
13595-3:2002, EN 13595-4:2002
English Version

Protective garments for motorcycle riders - Part 4: Class A
garments - Requirements
Vêtements de protection pour les motocyclistes - Partie Motorradfahrerschutzkleidung - Teil 4:
4 : Vêtements de classe A - Exigences Kleidungsstücke der Klasse A - Anforderungen
This European Standard was approved by CEN on 25 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17092-4:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17092-4:2020
EN 17092-4:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Requirements . 10
4.1 General . 10
4.1.1 Tests . 10
4.1.2 Innocuousness . 10
4.1.3 Dimensional stability of garments . 11
4.1.4 Garment and samples performance after cleaning . 11
4.2 Impact energy absorption . 11
4.2.1 General .
...

SLOVENSKI STANDARD
oSIST prEN 17092-4:2017
01-april-2017
Varovalna obleka za voznike motornih koles - 4. del: Varovalna obleka za lažje
poklicne obremenitve - Zahteve
Protective garments for motorcycle riders - Part 4: Light-duty protective garments -
Requirements
Motorradfahrerschutzkleidung - Teil 4: Schutzkleidung für geringe Belastungen -
Anforderungen
Ta slovenski standard je istoveten z: prEN 17092-4
ICS:
13.340.10 Varovalna obleka Protective clothing
43.140 Motorna kolesa in mopedi Motorcycles and mopeds
oSIST prEN 17092-4:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17092-4:2017

---------------------- Page: 2 ----------------------
oSIST prEN 17092-4:2017


DRAFT
EUROPEAN STANDARD
prEN 17092-4
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2017
ICS 13.340.10 Will supersede EN 13595-1:2002, EN 13595-2:2002,
EN 13595-3:2002, EN 13595-4:2002
English Version

Protective garments for motorcycle riders - Part 4: Light-
duty protective garments - Requirements
 Motorradfahrerschutzkleidung - Teil 4: Schutzkleidung
für geringe Belastungen - Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 162.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17092-4:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17092-4:2017
prEN 17092-4:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 9
4.1 General . 9
4.1.1 Innocuousness . 9
4.1.2 Dimensional stability of garments . 9
4.1.3 Garment and samples performance after cleaning . 9
4.2 Impact energy absorption . 9
4.2.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.