CEN ISO/TS 15877-7:2018
(Main)Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)
This part of ISO 15877 gives guidance for the assessment of conformity of materials, products, and assemblies in accordance with the applicable part(s) of ISO 15877 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
In conjunction with the other parts of ISO 15877 (see Foreword), this Technical Specification (International Standard) is applicable to Chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see Table 1 of ISO 15877-1:2009).
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 7: Empfehlungen für die Beurteilung der Konformität (ISO/TS 15877-7:2018)
Dieses Dokument enthält Anforderungen und Empfehlungen für die Beurteilung der Konformität von Werkstoffen, Produkten und Bauteilkombinationen, die, in Übereinstimmung mit den/dem entsprechenden Teil(en) von ISO 15877, als Teil des Qualitätsmanagementsystems im Qualitätssicherungsplan des Herstellers und für die Erstellung von Zertifizierungsverfahren vorgesehen sind.
ANMERKUNG Als Hilfe für den Leser enthält Anhang A eine grundlegende Prüfmatrix.
Zusammen mit den übrigen Teilen von ISO 15877 (siehe Vorwort) gilt dieses Dokument für Rohrleitungssysteme aus chloriertem Polyvinylchlorid (PVC C), die in der Warm- und Kaltwasserinstallation innerhalb von Gebäuden für die Durchleitung von Trink- oder Brauchwasser (Hausinstallation) sowie für Heizungsanlagen unter Berücksichtigung des betreffenden Systembetriebsdruckes und der für die jeweilige Anwendungsklasse geltenden Temperaturen (siehe ISO 15877 1:2009, Tabelle 1) eingesetzt werden.
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 7: Guide pour l'évaluation de la conformité (ISO/TS 15877-7:2018)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 7. del: Navodilo za ugotavljanje skladnosti (ISO/TS 15877-7:2018)
Ta del standarda ISO 15877 vsebuje navodila za ugotavljanje skladnosti materialov, izdelkov in sestavov z ustreznimi deli standarda ISO 15877, ki naj bi se vključila v poslovnik kakovosti proizvajalca kot del sistema vodenja kakovosti, vsebuje pa tudi navodila za vzpostavitev postopka certificiranja. Ta tehnična specifikacija (mednarodni standard) se v povezavi z drugimi deli standarda ISO 15877 (glej predgovor) uporablja za cevne sisteme iz kloriranega polivinilklorida (PVC-C), ki se uporabljajo za napeljave z vročo in hladno vodo za prenos pitne in nepitne vode v stavbah (gospodinjski sistemi), ter za sisteme ogrevanja glede na predvidene tlake in temperature v skladu z razredom uporabe (glej tabelo 1 v standardu ISO 15877-1:2009).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 15877-7:2019
01-marec-2019
1DGRPHãþD
SIST-TS CEN ISO/TS 15877-7:2009
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG 39&& GHO 1DYRGLOR]DXJRWDYOMDQMHVNODGQRVWL
,6276
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-
7:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 7: Empfehlungen für die Beurteilung der Konformität
(ISO/TS 15877-7:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 7: Guide pour l'évaluation de la
conformité (ISO/TS 15877-7:2018)
Ta slovenski standard je istoveten z: CEN ISO/TS 15877-7:2018
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST-TS CEN ISO/TS 15877-7:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 15877-7:2019
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 15877-7:2019
CEN ISO/TS 15877-7
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
December 2018
TECHNISCHE SPEZIFIKATION
ICS 91.140.60; 23.040.20; 23.040.01 Supersedes CEN ISO/TS 15877-7:2009
English Version
Plastics piping systems for hot and cold water installations
- Chlorinated poly(vinyl chloride) (PVC-C) - Part 7:
Guidance for the assessment of conformity (ISO/TS 15877-
7:2018)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid
vinyle) chloré (PVC-C) - Partie 7: Guide pour (PVC-C) - Teil 7: Empfehlungen für die Beurteilung der
l'évaluation de la conformité (ISO/TS 15877-7:2018) Konformität (ISO/TS 15877-7:2018)
This Technical Specification (CEN/TS) was approved by CEN on 29 October 2018 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 15877-7:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 15877-7:2019
CEN ISO/TS 15877-7:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 15877-7:2019
CEN ISO/TS 15877-7:2018 (E)
European foreword
This document (CEN ISO/TS 15877-7:2018) has been prepared by Technical Committee ISO/TC 138
"Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical Committee
CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 15877-7:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.