EN 840-5:2020
(Main)Mobile waste and recycling containers - Part 5: Performance requirements and test methods
Mobile waste and recycling containers - Part 5: Performance requirements and test methods
This European Standard gives the test methods for mobile waste and recycling containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done.
This European Standard is applicable to mobile waste and recycling containers with capacities up to 1 700 l.
Fahrbare Abfall- und Wertstoffbehälter - Teil 5: Anforderungen an die Ausführung und Prüfverfahren
Dieses Dokument legt die Prüfverfahren für fahrbare Abfall- und Wertstoffbehälter nach EN 840 1 bis EN 840 4 fest. Es legt auch die Anforderungsstufen fest, die während oder nach der Prüfung erreicht werden müssen.
Dieses Dokument gilt für fahrbare Abfall- und Wertstoffbehälter mit einem Nennvolumen bis 1 700 l.
Conteneurs roulants à déchets et de recyclage - Partie 5 : Exigences de performance et méthodes d’essais
Le présent document spécifie les méthodes d’essais applicables aux conteneurs roulants à déchets et de recyclage conformes aux EN 840 1 à EN 840 4. Elle indique également le niveau des exigences à atteindre lors des essais ou à l’issue des essais.
Le présent document s’applique aux conteneurs roulants à déchets et de recyclage de capacité inférieure ou égale à 1 700 l.
Premični zabojniki za odpadke in za recikliranje - 5. del: Zahtevane lastnosti in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 840-5:2020
01-junij-2020
Nadomešča:
SIST EN 840-5:2014
Premični zabojniki za odpadke in za recikliranje - 5. del: Zahtevane lastnosti in
preskusne metode
Mobile waste and recycling containers - Part 5: Performance requirements and test
methods
Fahrbare Abfall- und Wertstoffbehälter - Teil 5: Anforderungen an die Ausführung und
Prüfverfahren
Conteneurs roulants à déchets et de recyclage - Partie 5 : Exigences de performance et
méthodes d’essais
Ta slovenski standard je istoveten z: EN 840-5:2020
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 840-5:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 840-5:2020
---------------------- Page: 2 ----------------------
SIST EN 840-5:2020
EN 840-5
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 13.030.40 Supersedes EN 840-5:2012
English Version
Mobile waste and recycling containers - Part 5:
Performance requirements and test methods
Conteneurs roulants à déchets et de recyclage - Partie 5 Fahrbare Abfall- und Wertstoffbehälter - Teil 5:
: Exigences de performance et méthodes d'essais Anforderungen an die Ausführung und Prüfverfahren
This European Standard was approved by CEN on 7 October 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 840-5:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 840-5:2020
EN 840-5:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Tests . 5
4.1 General . 5
4.2 Control before the tests. 5
4.3 Control after the tests . 6
4.4 Conditions of the test . 6
4.5 Test load . 6
4.6 Other test conditions . 6
4.7 Tests on the containers . 7
4.8 St
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.