Specification for protective clothing for use where there is a risk of entanglement with moving parts

This standard specifies the properties of protective clothing that minimize the risk of its entanglement or drawing-in by moving parts when the wearer is working at or near hazardous moving machines or devices. This standard does not include protective clothing against injuries by special moving machine parts for which specific standards exist, e.g. protective clothing for users of chainsaws.

Festlegungen für Schutzkleidungen für Bereiche, in denen ein Risiko des Verfangens in beweglichen Teilen besteht

Dieses Dokument legt in Ergänzung zu den allgemeinen Anforderungen in EN ISO 13688 Ausführungsanforderungen an Schutzkleidungsstücke fest, die das Risiko ihres Verfangens oder Einziehens durch bewegte Teile, wenn der Träger an oder in der Nähe von Maschinen oder Geräten mit gefährlichen Bewegungen arbeitet, minimieren.
Dieses Dokument gilt nicht für Schutzkleidung gegen Verletzungen durch spezielle bewegte Maschinenteile, für die es spezifische Normen gibt, z. B. Schutzkleidung für Nutzer von Kettensägen (EN ISO 11393).

Spécification pour l’habillement de protection destiné à être utilisé en cas de risque de happement par des pièces de machines en mouvement

Le présent document spécifie les exigences de conception des vêtements de protection qui réduisent au minimum les risques de happement ou d'entraînement par des pièces en mouvement lorsque le porteur travaille sur ou à proximité des machines ou appareils en mouvement dangereux. Ces exigences sont complémentaires des exigences générales énoncées dans l'EN ISO 13688.
Le présent document exclut l’habillement de protection contre les blessures occasionnées par des parties particulières de machines en mouvement pour lequel il existe des normes spécifiques, par exemple l’habillement de protection pour les utilisateurs de scies à chaîne (EN ISO 11393)

Opredelitev zahtev za varovalno oblačilo, kjer je nevarnost, da se oblačilo zaplete ob gibajoče dele

Ta standard določa lastnosti varovalnih oblačil, pri katerih je nevarnost, da se oblačilo zaplete ob premikajoče se dele oziroma da se vanje zatakne, ko uporabnik dela na nevarnih premičnih strojih ali napravah oziroma v njihovi bližini, kar najmanjša. Ta standard ne vključuje varovalnih oblačil za zaščito pred poškodbami s posebnimi premikajočimi se deli strojev, za katere obstajajo posebni standardi, npr. varovalna oblačila za uporabnike motornih žag.

General Information

Status
Published
Publication Date
26-Nov-2019
Withdrawal Date
30-May-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Nov-2019
Due Date
30-Nov-2019
Completion Date
27-Nov-2019

Relations

Buy Standard

Standard
EN 510:2020
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 510:2018
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 510:2020
01-januar-2020
Nadomešča:
SIST EN 510:1996
Opredelitev zahtev za varovalno oblačilo, kjer je nevarnost, da se oblačilo zaplete
ob gibajoče dele
Specification for protective clothing for use where there is a risk of entanglement with
moving parts
Festlegungen für Schutzkleidungen für Bereiche, in denen ein Risiko des Verfangens in
beweglichen Teilen besteht
Spécification pour l’habillement de protection destiné à être utilisé en cas de risque de
happement par des pièces de machines en mouvement
Ta slovenski standard je istoveten z: EN 510:2019
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN 510:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 510:2020

---------------------- Page: 2 ----------------------
SIST EN 510:2020


EN 510
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 13.340.10 Supersedes EN 510:1993
English Version

Specification for protective clothing for use where there is
a risk of entanglement with moving parts
Spécification pour l'habillement de protection destiné à Festlegungen für Schutzkleidungen für Bereiche, in
être utilisé en cas de risque de happement par des denen ein Risiko des Verfangens in beweglichen Teilen
pièces de machines en mouvement besteht
This European Standard was approved by CEN on 23 September 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 510:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 510:2020
EN 510:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
5 Dimensional change . 7
6 General size designation. 7
7 Marking . 7
8 Information supplied by the manufacturer . 8
Annex A (informative) Rationale and specific features . 9
Annex B (informative) Significant changes between this document and the previous edition . 10
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of R
...

SLOVENSKI STANDARD
oSIST prEN 510:2018
01-oktober-2018
2SUHGHOLWHY]DKWHY]DYDURYDOQRREOHNRNMHUMHQHYDUQRVWGDVHREOHND]DSOHWHRE
JLEDMRþHGHOH
Specification for protective clothing for use where there is a risk of entanglement with
moving parts
Festlegungen für Schutzkleidungen für Bereiche, in denen ein Risiko des Verfangens in
beweglichen Teilen besteht
Spécification pour l’habillement de protection destiné à être utilisé en cas de risque de
happement par des pièces de machines en mouvement
Ta slovenski standard je istoveten z: prEN 510
ICS:
13.340.10 Varovalna obleka Protective clothing
oSIST prEN 510:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 510:2018

---------------------- Page: 2 ----------------------
oSIST prEN 510:2018


DRAFT
EUROPEAN STANDARD
prEN 510
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2018
ICS 13.340.10 Will supersede EN 510:1993
English Version

Specification for protective clothing for use where there is
a risk of entanglement with moving parts
Spécification pour l'habillement de protection destiné à Festlegungen für Schutzkleidungen für Bereiche, in
être utilisé en cas de risque de happement par des denen ein Risiko des Verfangens in beweglichen Teilen
pièces de machines en mouvement besteht
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 162.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 510:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 510:2018
prEN 510:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
4.1 General . 5
4.2 Design . 5
4.2.1 Basic design requirements . 5
4.2.2 Additional design requirements in relation to the garment type . 6
5 Dimensional
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.