EN ISO 27020:2019
(Main)Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019)
Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019)
This document specifies requirements and test methods to compare the functional dimensions of orthodontic brackets and tubes and their chemical ion release, as well as packaging and labelling information.
This document is applicable to brackets and tubes for use in fixed orthodontic appliances.
This document does not specify specific qualitative and quantitative requirements for freedom from biological hazards; which are covered in ISO 10993‑1 and ISO 7405.
Zahnheilkunde - Brackets und Röhrchen für die Kieferorthopädie (ISO 27020:2019)
Dieses Dokument legt Anforderungen und Prüfverfahren fest für den Vergleich der funktionalen Abmessungen von kieferorthopädischen Brackets und Röhrchen und ihre chemische Ionenabgabe sowie Angaben zur Verpackung und Kennzeichnung.
Dieses Dokument gilt für Brackets und Röhrchen, die für festsitzende kieferorthopädische Apparaturen verwendet werden.
In diesem Dokument werden keine besonderen qualitativen und quantitativen Anforderungen zum Ausschluss biologischer Risiken gestellt, die in ISO 10993 1 und ISO 7405 beschrieben werden.
Médecine bucco-dentaire - Consoles et tubes utilisés en orthodontie (ISO 27020:2019)
Le présent document spécifie des exigences et des méthodes d'essai permettant de comparer les dimensions fonctionnelles des consoles et tubes orthodontiques et leur relargage d'ions chimiques, ainsi que des informations relatives au conditionnement et à l'étiquetage.
Le présent document s'applique aux consoles et tubes à utiliser sur les appareils orthodontiques fixes.
Le présent document ne comprend aucune exigence qualitative et quantitative relative à l'absence de risque biologique, celles-ci sont traitées par l'ISO 10993‑1 et l'ISO 7405.
Zobozdravstvo - Nastavki in cevke za uporabo v ortodontiji (ISO 27020:2019)
Ta dokument določa pogoje za vrste mikroleč. Uporablja se za vrste mikroleč, ki so sestavljene iz zelo majhnih leč znotraj ali na eni ali več površinah običajnega substrata. Dokument se uporablja tudi za sisteme vrst mikroleč.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 27020:2019
01-september-2019
Nadomešča:
SIST EN ISO 27020:2011
Zobozdravstvo - Nastavki in cevke za uporabo v ortodontiji (ISO 27020:2019)
Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019)
Zahnheilkunde - Brackets und Röhrchen für die Kieferorthopädie (ISO 27020:2019)
Médecine bucco-dentaire - Consoles et tubes utilisés en orthodontie (ISO 27020:2019)
Ta slovenski standard je istoveten z: EN ISO 27020:2019
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 27020:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 27020:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 27020:2019
EN ISO 27020
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN ISO 27020:2010
English Version
Dentistry - Brackets and tubes for use in orthodontics (ISO
27020:2019)
Médecine bucco-dentaire - Consoles et tubes utilisés en Zahnheilkunde - Brackets und Röhrchen für die
orthodontie (ISO 27020:2019) Kieferorthopädie (ISO 27020:2019)
This European Standard was approved by CEN on 10 May 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 27020:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 27020:2019
EN ISO 27020:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 27020:2019
EN ISO 27020:2019 (E)
European foreword
This document (EN ISO 27020:2019) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 27020:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 27020:2019 has been approved by CEN as EN ISO 27020:2019 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 27020:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 27020:2019
INTERNATIONAL ISO
STANDARD 27020
Second edition
2019-06
Dentistry — Brackets and tubes for
use in orthodontics
Médecine bucco-dentaire — Consoles et tubes utilisés en orthodontie
Reference number
ISO 27020:2019(E)
©
ISO 2019
---------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.