This European Standard specifies the requirements related to dimensional, mechanical and optical characteristics of thermoplastic films and tubes used during the manufacture of silage and designed to last at least one year for protecting fodder.
It specifies a classification for the durability of silage films and the test methods referred to in this standard.
This European Standard is applicable to transparent, black, white or coloured (e.g. black/white) thermoplastic silage films based on polyethylene, ethylene copolymer, EVOH and polyamide.
These films are intended for covering bunker silos, silage tubes or silage clamps for preserving forage. They protect the forage and preserve it from rain and air. These films are not intended to cover bales piles (e.g. straw bales and hay bales).
Silage films obtained by sealing two or more films in machine direction are out of the scope of this document.
This European Standard also defines installation, use and removal conditions of silage films. It defines the conventional useful lifetime, as well as rules that allow evaluating the remaining use potential in the event of a failure before the normal end-of-use date.
NOTE   These rules allow estimating the residual value of the films. These provisions only apply to the film itself and the damage it has undergone. Any other problem falls within the scope of professional practices and the general terms and conditions of sale.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

DOP of 12 months! * 2017-03-22 FJD - No xml version as mother version was not originally published as xml.

  • Amendment
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the requirements related to dimensional, mechanical and optical characteristics of thermoplastic films and tubes used during the manufacture of silage and designed to last at least one year for protecting fodder.
It specifies a classification for the durability of silage films and the test methods referred to in this standard.
This European Standard is applicable to transparent, black, white or coloured (e.g. black/white) thermoplastic silage films based on polyethylene, ethylene copolymer, EVOH and polyamide.
These films are intended for covering bunker silos, silage tubes or silage clamps for preserving forage. They protect the forage and preserve it from rain and air. These films are not intended to cover bales piles (e.g. straw bales).
This European standard does not cover silage film obtained by sealing two or more films in machine direction.
This European Standard also defines installation, use and removal conditions of silage films. It defines the conventional useful lifetime, as well as rules that allow evaluating the remaining use potential in the event of a failure before the normal end-of-use date.
NOTE   These rules allow estimating the residual value of the films. These provisions only apply to the film itself and the damage it has undergone. Any other problem falls within the scope of professional practices and the general terms and conditions of sale.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

DOP of 12 months!

  • Amendment
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 7700 specifies a method of checking the performance of moisture meters in service for measuring the moisture content of cereal grains.
This part of ISO 7700 is not applicable for pattern approval, nor for the initial calibration of moisture meters.
The results of the checking described in this part of ISO 7700 are used to decide whether to perform a revision or a repair of the moisture meter.
NOTE For built and pattern approval specifications, see OIML Recommendation 59[1].

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    French language
    sale 15% off

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface.
It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
The document only deals with the hazards generated by the silo unloader and not with those of the silo system itself (e.g. hazards arising from generated gases).
This document is not applicable to noise and fire hazards and hazards related to the foreseeable misuse.
The document does not deal with technical requirements for installation or removal of the unloader from one silo to another.
The list of significant hazards dealt with in this document is given in annex A. Annex A also indicates the hazards which have not been dealt with.
The environmental aspects have not been considered in this document.
This document applies primarily to machines which are manufactured after the date of issue of this document.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface. It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Complementary to Part 1. Varied general rules and additional detailed rules for the structural design of free standing or supported steel silos of circular or rectangular plan for storing bulk granular solids.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Modifications in Foreword, Clauses 1, 2, 4, 5, 6, 8 and 9 and Annex A in the E mother reference version.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Modifications in Foreword, Clauses 1, 2, 4, 5, 6, 8 and 9 and Annex A in the E mother reference version.
2013: Originator of XML version: first setup pilot of CCMC in 2012

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • National annex
    6 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day

This standard applies for automatic back splitting machines.
This standard deals with all significant hazards, hazardous situations and events relevant to machines, appliances and machinery, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
These significant hazards, hazardous situations and events exist during the whole life of back splitting machines.
This standard applies not to curing injection machines which are manufactured before CEN this document has published.
This European standard specifies requirements for the design and manufacture of the machines used in slaughterhouses in order to fully automatically split meat animal (beef and pork) along the back-bone axis (see figure 1).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Complementary to Part 1. Varied general rules and additional detailed rules for the structural design of free standing or supported steel silos of circular or rectangular plan for storing bulk granular solids.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 11520 specifies additional procedures and gives guidance for testing and evaluating the drying performance of continuous-flow and batch grain driers for specific grain crops including wheat, barley, oats, maize, rice, sorghum and rape. It supplements the general procedures given in ISO 11520-1 based on drying only wheat over the limited range of moisture content of 20 % to 15 % wet basis. Methods and data are given for a) determining the evaporation rate of driers when drying grain crops under steady state conditions, and b) correcting the main drier performance characteristics, including evaporation rate, grain flow rate, drying time and specific energy and fuel consumption, to reference and other ambient conditions. Procedures are specified for sampling input and output grain to assess changes in grain quality.

  • Standard
    102 pages
    English language
    sale 15% off
  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off

Gives the definitions of terms used in olive oil production and olive cultivation.

  • Standard
    26 pages
    English language
    sale 15% off

This document specifies the safety and hygiene requirements applicable to slaughtering traps intended for bovine animals and equidae such as defined in Clause 3.
These requirements take into account hazards that may arise from the transport, mounting, adjustment, maintenance and use of these slaughtering traps.
NOTE   This document takes into account the protection of animals at the time of killing.
The machinery or installations covered by this document are intended to facilitate the slaughter of bovine animals or equidae that weigh between 100 kg and 1 200 kg. They are either rotating slaughtering traps or fixed slaughtering traps.
This document does not cover the following machinery and zones:
-   "restrainers": systems for holding and conveying via conveyor belts;
-   slaughtering traps with a side door that opens under the weight of the animal alone;
-   slaughtering traps where the only source of energy is manual effort.
This document does not cover the following essential requirements of Machinery Directive:
-   safety and reliability of control systems;
-   control devices;
-   failure of the power supply;
-   isolation of energy source.
The list of significant hazards is given in the informative Annex C.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the safety and hygiene requirements applicable to slaughtering traps intended for bovine animals and equidae such as defined in Clause 3.
These requirements take into account hazards that may arise from the transport, mounting, adjustment, maintenance and use of these slaughtering traps.
NOTE   This document takes into account the protection of animals at the time of killing.
The machinery or installations covered by this document are intended to facilitate the slaughter of bovine animals or equidae that weigh between 100 kg and 1 200 kg. They are either rotating slaughtering traps or fixed slaughtering traps.
This document does not cover the following machinery and zones:
-   "restrainers": systems for holding and conveying via conveyor belts;
-   slaughtering traps with a side door that opens under the weight of the animal alone;
-   slaughtering traps where the only source of energy is manual effort.
This document does not cover the following essential requirements of Machinery Directive:
-   safety and reliability of control systems;
-   control devices;
-   failure of the power supply;
-   isolation of energy source.
The list of significant hazards is given in the informative Annex C.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

- Corrugated silos with vertical stiffeners
- Axially stiffened silos with isotropic walls
- Hopper buckling and transition junctions
- Anchorage and wind pressure combinations
- Internal ties in rectangular silos
- Elephant’s foot buckling and restrictions on all silos

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

- Corrugated silos with vertical stiffeners
- Axially stiffened silos with isotropic walls
- Hopper buckling and transition junctions
- Anchorage and wind pressure combinations
- Internal ties in rectangular silos
- Elephant’s foot buckling and restrictions on all silos

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for design, performance, safety and hygiene of refrigerated bulk milk coolers and the related methods of test. This standard deals with all significant hazards, hazardous situations and events relevant to bulk milk coolers on farms, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It applies to refrigerated bulk milk tanks with air cooled condensing units and automatic control intended for installation on farms or at milk collecting points. It applies to tanks for two milkings (24 h), four milkings (48 h) and six milkings (72 h), in which the cooling takes place totally (non-pre-cooled milk) or partially (in case of pre-cooled milk) within the tank. Performance requirements in 5.5.1.2.1 and 5.5.1.2.2 do not apply to tanks in combination with instant cooling or in association with a continuous system of milking (e.g. milking with robot).

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This document applies only to machines that have the following functional combinations:
-   mixing and distributing functions; or
-   mixing, chopping and distributing functions; or
-   loading, mixing and distributing functions; or
-   loading, mixing, chopping and distributing functions; or
-   chopping and distributing functions; or
-   loading, chopping and distributing functions.
Silage block cutters, even if they carry out a single function, are covered by this document.
It does not apply:
-   to machines which pick up green fodder directly from the field;
-   to loading cranes;
-   to silage buckets.
NOTE 1   Loading cranes are dealt with in EN 12999.
NOTE 2   Silage buckets will be dealt through an amendment or during next revision.
This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising from:
-   failure of the control circuit;
-   inadequate seating;
-   inadequate lighting;
-   impossibility of stopping the machine in the best possible conditions;
-   travelling of machinery;
-   break-up of parts rotating at high speed.
It is not applicable to environmental hazards (except noise).

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the basic requirements for physical and mechanical characteristics of films used during the manufacture of silage and designed to last a maximum of one year for protecting fodder. The films are usually black, white or bicoloured (double face, black and white) and are made of polyethylene or its copolymers.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the basic requirements for physical and mechanical characteristics of films used during the manufacture of silage and designed to last a maximum of one year for protecting fodder. The films are usually black, white or bicoloured (double face, black and white) and are made of polyethylene or its copolymers.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The method is applicable to oats, durum wheat, wheat, maize, barley, rice, rye and sorghum. It consists in preparing of several test samples, or a range of test samples, with different moisture contents, under specified conditions, determining of their moisture contents by a reference method and measuring with the meter to be checked. An annex specifies the maximum permitted errors.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

TC - New Figure B.3

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies safety requirements for design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface. It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies safety requirements for design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface. It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Part 4.1 of Eurocode 3 provides principles and application rules for the structural design of steel silos of circular or rectangular plan-form, being free standing or supported.

  • Standard + National Annex and/or Foreword
    103 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day

Part 4.1 of Eurocode 3 provides principles and application rules for the structural design of steel silos of circular or rectangular plan-form, being free standing or supported.

  • Standard + National Annex and/or Foreword
    103 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies safety requirements and their verification for design and construction of the different types of mounted, trailed or self-propelled silage cutters for one operator only, including mixing and distributor silage cutters.   It describes methods for the elimination or reduction of risks which need specific requirements for silage cutters. It does not deal with general hazards particularly general hazards related to the mobility, including those specific to self-propelled machines. These apects will be dealt with in another standard produced by CEN/TC 144 (see introduction).  In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.  The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.  Note 1: The safety measures for the locking device for the raised parts of the machine and the safeguarding for the PTO drive shaft are dealt with in the 'Common requirements' standard being prepared by CEN/TC 144.  Note 2: A future revision of the standard will include:  - additional requirements related to the safeguarding of the disharge    chute; - additional information on the procedure for clearing blockages.  Environmental aspects have not been considered in this standard.   This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - New Figure B.3

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day