IEC TR 63307:2020(E) provides guidelines on the methods for measuring the frequency characteristics of permeability and permittivity in the frequency range of 1 MHz to 6 GHz for a noise suppression sheet for each electromagnetic noise countermeasure.

    • sale 15% off
    • Technical report
      74 pages
      English language

IEC 63182-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ring-cores (also called toroids) made of magnetic powder, the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to coated ring-cores. The selection of core sizes for this document is based on the philosophy of including those sizes which are industrial standards, meaning that t...view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

IEC 63182-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ring-cores (also called toroids) made of magnetic powder, the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to coated ring-cores.
The selection of core sizes for this document is based on the philosophy of including those sizes which are industrial standards, meaning that ...
view more

    • sale 15% off
    • Standard
      21 pages
      English and French language

This part of IEC 60401 provides a nomenclature of the most frequent surface, bulk and shape
irregularities relevant to cores made of soft ferrites (magnetic oxides). Most irregularities are
graphically exemplified as visual aids. A general recommendation is also given in Annex A for
a consistent scheme for specifying the exact location of the irregularity, combining a general
name for the location with more detailed qualifiers of the specified location. This document
can also be useful as a...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This part of IEC 63093 specifies the dimensions and allowable limits of surface irregularities
of ferrite cores.
It is intended that this document includes ferrite cores which are widely used and referenced
in industry, either because they are included in national standards, or because they are seen
to have broad-based use in industry. Where applicable, it is intended that the existing
industrial name for each standard part appears with the part within this series.
It is intended that this...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This part of IEC 63093 specifies the shapes and dimensions of ferrite cores for inductive
components (transformers and chokes), whose the coil is typically made of multi-layer boards
(or the coil is part of the motherboard), and the effective parameter values used in
calculations. This document gives guidelines on allowable limits of surface irregularities
applicable to planar-cores as well.
This document is considered as a sectional specification useful in the negotiation between
ferrite ...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This document specifies a test method for the mechanical strength of cores made of magnetic
oxides. This test method is suitable for most of the E-cores, ETD-cores, I-cores and ringcores
but other core types such as U-cores could be tested according to a derived method
agreed by the parties concerned. This document is also applicable to the mechanical strength
measurement of magnetic powder cores.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This part of IEC 63182 specifies the dimensions of magnetic powder cores.
It is intended that this document will include magnetic powder cores which are widely used and
referenced in industry, either because they are included in national standards, or because they
are seen to have broad-based use in industry. Where applicable, it is intended that the existing
industrial name for each powder core will appear with the part within the IEC 63182 series.
This document also gives guidelines on th...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

IEC 61007:2020 describes a number of tests for use in determining the significant parameters and performance characteristics of transformers and inductors for use in electronics and telecommunication equipment. These test methods are designed primarily for transformers and inductors used in all types of electronics applications that can be involved in any specification for such components. Even though these tests can be useful to the other types of transformers used in power distribution applica...view more

    • sale 15% off
    • Standard
      186 pages
      English and French language

IEC 63182-1:2020 specifies the dimensions of magnetic powder cores. This document also gives guidelines on the allowable limits of surface irregularities of magnetic powder cores. It is considered as a general specification useful in the dialogue between magnetic powder core manufacturers and users about surface irregularities.
It is intended that this document will include magnetic powder cores which are widely used and referenced in industry, either because they are included in national stand...
view more

    • sale 15% off
    • Standard
      26 pages
      English and French language
    • sale 15% off
    • Standard
      13 pages
      English language

IEC 61631:2020 is available as IEC 61631:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61631:2020 specifies a test method for the mechanical strength of cores made of magnetic oxides. This test method is suitable for most of the E-cores, ETD-cores, I-cores and ring-cores but other core types such as U-cores could be tested according to a derived method agreed by the parties concern...
view more

    • sale 15% off
    • Standard
      32 pages
      English and French language
    • sale 15% off
    • Standard
      16 pages
      English language

IEC 63093-1:2020 specifies the dimensions and allowable limits of surface irregularities of ferrite cores.
It is intended that this document excludes ferrite cores which are specialty cores with limited use. Also, special cores which are only marginal variations upon standard cores are excluded.
IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in one type of...
view more

    • sale 15% off
    • Standard
      28 pages
      English and French language

IEC 63093-9:2020 specifies the shapes and dimensions of ferrite cores for inductive components (transformers and chokes), whose the coil is typically made of multi-layer boards (or the coil is part of the motherboard), and the effective parameter values used in calculations. This document gives guidelines on allowable limits of surface irregularities applicable to planar-cores as well.
This document is considered as a sectional specification useful in the negotiation between ferrite core suppli...
view more

    • sale 15% off
    • Standard
      61 pages
      English and French language

IEC 60401-1:2020 is available as IEC 60401-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60401-1:2020 provides a nomenclature of the most frequent surface, bulk and shape irregularities relevant to cores made of soft ferrites (magnetic oxides). Most irregularities are graphically exemplified as visual aids. A general recommendation is also given in Annex A for a consistent scheme...
view more

    • sale 15% off
    • Standard
      58 pages
      English and French language
    • sale 15% off
    • Standard
      28 pages
      English language

IEC 62024-2:2020 is available as IEC 62024-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62024-2:2020 specifies the measuring methods of the rated direct current limits for small inductors. Standardized measuring methods for the determination of ratings enable users to accurately compare the current ratings given in various manufacturers’ data books. This document is applicable to...
view more

    • sale 15% off
    • Standard
      36 pages
      English and French language

IEC 63093-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be used with them, as well as the effective parameter values to be used in calculations involving them. It also gives guidelines on the allowable limits of surface irregularities applicable to pot-cores in accordance with the relevant generic specification.
The selection of core sizes and shapes for ...
view more

    • sale 15% off
    • Standard
      42 pages
      English and French language

IEC 63093-3:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of half pot-cores made of ferrite, intended to be used in inductive proximity switches. Half pot-cores for inductive proximity switches are also called PS-cores.
The selection of core sizes and shapes for this document is based on the philosophy of including those sizes and shapes which are industrial standards, either by inclusion in a national standard, or by broad-based us...
view more

    • sale 15% off
    • Standard
      28 pages
      English and French language

IEC 62003:2020 establishes requirements for electromagnetic compatibility testing of instrumentation, control, and electrical equipment supplied for use in systems important to safety at nuclear power plants and other nuclear facilities. The document lists the applicable IEC standards (principally the IEC 61000 series) which define the general test methods, and provides the necessary application-specific parameters and criteria to ensure that nuclear safety requirements are met.
This second edi...
view more

    • sale 15% off
    • Standard
      80 pages
      English and French language

IEC 62025-2:2019 is available as IEC 62025-2:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62025-2:2019 specifies a test method for the non-electrical characteristics of the surface mounted device (SMD) inductors to be used for electronic and telecommunication equipment. The object of this part of this document is to define methods for measuring mechanical performance only. As the ...
view more

    • sale 15% off
    • Standard
      48 pages
      English and French language

This part of IEC 63093 specifies the dimensions that are of importance for mechanical
interchangeability for a preferred range of ETD-cores made of ferrite and the essential
dimensions of coil formers to be used with them, as well the effective parameter values to be
used in calculations involving them. It also gives guidelines on allowable limits of surface
irregularities applicable to ETD-cores.
The specifications contained in this document are useful in negotiations between ferrite core
...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day