This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems.
This part is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B.
It specifies test methods and test p...
view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems.
This part is applicable to pipes and fittings with smooth internal and external surfaces, designated as Type A.
It specifies test methods and test parameters...
view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This document specifies the definitions and requirements for ancillary fittings and shallow chambers installed underground in non-pressure drainage and sewerage systems and manufactured from unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifier (PP-MD) or polyethylene (PE) intended for use for:
-   non-pressure underground drainage and sewerage outside the building structure (application area code "U"), and
-   non-pressure underground drainage and sew...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      30 pages
      English language
    • e-Library read for
      1 day

This document specifies the definitions and requirements for unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) manholes and inspection chambers intended for non-pressure underground drainage and sewerage systems to a maximum depth of 6 m from ground level to the invert of the manhole or inspection chamber.
This document covers manholes and inspection chambers with flow profile bases, and their joints to the piping system.
Manholes and inspection chambers are ...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      31 pages
      English language
    • e-Library read for
      1 day

This document gives requirements and guidance for the assessment of conformity of formulations, products and assemblies in accordance with EN 1401-1 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of third-party certification procedures.
NOTE 1 The quality management system is expected to conform to or is no less stringent than the relevant requirements to EN ISO 9001 [1].
NOTE 2 If third party certification is invol...
view more

    • sale 10% off
    • Technical specification
      24 pages
      English language
    • e-Library read for
      1 day

This document gives guidance for the assessment of conformity of materials, products, joints and assemblies in accordance with the applicable part(s) of EN 13476 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1   The quality management system is expected to conform to or be no less stringent than the relevant requirements to EN ISO 9001 [1].
NOTE 2   If third-party certification is invo...
view more

    • sale 10% off
    • Technical specification
      25 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      25 pages
      English language
    • e-Library read for
      1 day

This document gives guidance for the assessment of conformity of materials, products, joints and assemblies in accordance with the applicable part(s) of EN 1852 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1   The quality management system is expected to conform to or be no less stringent than the relevant requirements in EN ISO 9001 [1].
NOTE 2   If third-party certification is invol...
view more

    • sale 10% off
    • Technical specification
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for solid wall pipes with smooth internal and external surfaces, extruded from the same formulation throughout the wall, fittings and the system of unplasticized poly(vinyl chloride) (PVC U) piping systems in the field of non-pressure underground drainage and sewerage:
-   buried in ground outside the building structure (application area code "U"), and
-   both buried in ground, within the building structure (application area code "D") and outside the build...
view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

This document, in conjunction with ISO 11296-1, specifies requirements and test methods for pipes
which are formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip,
or a profiled plastics strip and integral locking joiner strip, and used for the renovation of underground
non-pressure drainage and sewerage networks.
It applies to spirally-wound pipes of fixed or variable diameter made of profiled plastics strips, with or
without steel stiffening elements, a...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document, in conjunction with ISO 11297-1, specifies requirements and test methods for close-fit
lining systems intended to be used for the renovation of underground drainage and sewerage networks
under pressure.
It applies to pipes and fittings, as manufactured, as well as to the installed lining system. It is applicable
to polyethylene (PE) pipes of either solid wall single layer or co-extruded layer construction, which is
reduced in the factory or on site to provide a close-fitting ...
view more

    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

This document, in conjunction with ISO 11296-1, specifies requirements and test methods for close-fit
lining systems used for the renovation of underground non-pressure drainage and sewerage networks.
It applies to pipes and fittings made of polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC‑U)
as manufactured, as well to the installed lining system with its associated joints.

    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and test methods for plastics piping systems intended to
be used for the renovation of underground non-pressure drainage and sewerage networks, which are
operated as gravity systems and subjected to a maximum surcharge pressure of 0,5 bar1). It is applicable
to pipes and fittings, as manufactured, as well as to the installed lining system. It is not applicable to the
existing pipeline or any non-structural sprayed coatings or annular filler.
This doc...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and test methods for plastics piping systems intended to be
used for the renovation of underground drainage and sewerage networks under pressure, including
both hydraulically and pneumatically pressurized systems. It is applicable to pipes and fittings, as
manufactured, as well as to the installed lining system. It is not applicable to the existing pipeline or
any non-structural sprayed coatings or annular filler.
This document gives the general requ...
view more

    • sale 10% off
    • Draft
      23 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

This European Standard, together with EN 13476 2 and EN 13476 3, specifies the definitions and general requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are to be used for non-pressure underground drainage and sewerage systems.
This standard is applicable to:
a)   structured-wall pipes and fittings, which are to be used buried in the ground outside a building structure ...
view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This Part 2 of EN 13566, read in conjunction with Part 1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of non-pressure drainage and sewerage networks. It covers;
-   homogeneous-wall (HW) pipes made of polyethylene (PE) or polypropylene (PP),
-   structured-wall (SW) pipes of the corrugated double-wall type of construction as defined in Annex B, whose structural layer(s) is (are) made of PE ...
view more

    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document, in conjunction with ISO 11296-1, specifies requirements and test methods for cured-inplace
pipes and fittings used for the renovation of underground non-pressure drainage and sewerage
networks with service temperatures up to 50 °C.
It applies to the use of various thermosetting resin systems, in combination with compatible fibrous
carrier materials, reinforcement, and other process-related plastics components (see 5.3).

    • sale 10% off
    • Draft
      48 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

This International Standard, in conjunction with ISO 11297-1, specifies requirements and test methods for cured-in-place pipes and fittings used for the renovation of underground drainage and sewerage networks under pressure.
It applies to the use of various thermosetting resin systems, in combination with compatible fibrous carrier materials and other process-related plastics components.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This International Standard, read in conjunction with Part 1, specifies requirements and test methods for pipes
and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of
underground drainage and sewerage networks under pressure. It is applicable to PE pipes of three different
types:
- PE solid wall single layered pipes (nominal outside diameter, dn ), including any identification stripes;
- PE pipes with co-extruded layers on either or both the out...
view more

    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This Technical Report is applicable to the installation of rainwater infiltration and storage/attenuation systems under gravity.
This Technical Report covers installations including:
-   reservoirs made by assembled cuboid shaped thermoplastic boxes;
-   integral components;
-   ancillary components (e.g. access provisions and connections);
-   geotextiles and/or geomembranes;
-   embedment and backfill.
These systems are intended for underground use in landscape, pedestrian or vehicular traffic ar...
view more

    • sale 10% off
    • Technical report
      20 pages
      English language
    • e-Library read for
      1 day

ISO 11296-2:2018, in conjunction with ISO 11296-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground non-pressure drainage and sewerage networks. It is applicable to polyethylene (PE) pipes of three different types:
- PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes;
- PE pipes with co-extruded layers on either or both the ...
view more

    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day