This document specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution.
For the purpose of this document, the term “alarm” is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed firefighting systems, intrusion and hold-up alarm systems, access control systems, video surveillance systems, social alarms systems and combinations of such systems.
This document gives requirements for two categories of ARC, category I and category II. A category I ARC will be designed, constructed and operated to a higher standard with respect to construction, security and integrity than a category II ARC.
The categorization is determined according to the type(s) of alarm messages handled.
Category I: ARCs handling messages from security applications:
- I&HAS’s;
- access control systems;
- VSS in security applications that require an emergency response (for example loss prevention);
- people monitoring, lone workers and object tracking systems for security applications;
- alarm messages handled by category II ARCs;
- combinations of the above systems.
Category II: ARC’s handling messages from non-security applications:
- fire alarm systems;
- fixed firefighting systems;
- social alarm systems;
- audio/video door entry systems;
- VSS in non-security applications (for example traffic flow);
- people monitoring, lone workers and object tracking systems for non-security applications;
- lifts emergency systems;
- combinations of the above systems.
The requirements apply to ARC’s (whether established in single or multiple sites) monitoring and processing alarms generated by systems installed at other locations and also to ARC’s monitoring solely alarms from systems within their own site.
The document includes functional and specific requirements supporting the services of an ARC.
The document does NOT apply to:
- alarm systems used for non-civil purposes;
- alarm systems for medical or health applications.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution. For the purpose of this document, the term “alarm” is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed firefighting systems, intrusion and hold-up alarm systems, access control systems, video surveillance systems, social alarms systems and combinations of such systems. This document gives requirements for two categories of ARC, category I and category II. A category I ARC will be designed, constructed and operated to a higher standard with respect to construction, security and integrity than a category II ARC. The categorization is determined according to the type(s) of alarm messages handled. Category I: ARCs handling messages from security applications: - I&HAS’s; - access control systems; - VSS in security applications that require an emergency response (for example loss prevention); - people monitoring, lone workers and object tracking systems for security applications; - alarm messages handled by category II ARCs; - combinations of the above systems. Category II: ARC’s handling messages from non-security applications: - fire alarm systems; - fixed firefighting systems; - social alarm systems; - audio/video door entry systems; - VSS in non-security applications (for example traffic flow); - people monitoring, lone workers and object tracking systems for non-security applications; - lifts emergency systems; - combinations of the above systems. The requirements apply to ARC’s (whether established in single or multiple sites) monitoring and processing alarms generated by systems installed at other locations and also to ARC’s monitoring solely alarms from systems within their own site. The document includes functional and specific requirements supporting the services of an ARC. The document does NOT apply to: - alarm systems used for non-civil purposes; - alarm systems for medical or health applications.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document serves as a guide on the selection, installation, use and maintenance of apparatus for the
detection of carbon monoxide, intended for continuous operation in a fixed installation in domestic premises,
caravans and boats. This guide is intended to cover any type of domestic or residential accommodation,
including leisure accommodation vehicles such as touring and static caravans, and motor homes; and
recreational craft such as canal barges. Some static caravans are used as permanent dwellings; in such cases
EN 50291-1 is appropriate. For all other types of caravan, EN 50291-2 is appropriate. This guide is read in
conjunction with EN 50291-1 and EN 50291-2 together with any additional relevant national or local regulations.
This document refers to the installation of two types of apparatus:
a) Type A apparatus, to provide a visual and audible alarm and an executive action in the form of an output
signal that can be used to actuate directly or indirectly a ventilation or other ancillary device;
b) Type B apparatus, to provide a visual and audible alarm only.
This document excludes apparatus for the detection of combustible gases (see EN 50244) and for industrial
installations or commercial premises.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements for design, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document serves as a guide on the selection, installation, use and maintenance of apparatus for the detection of carbon monoxide, intended for continuous operation in a fixed installation in domestic premises, caravans and boats. This guide is intended to cover any type of domestic or residential accommodation, including leisure accommodation vehicles such as touring and static caravans, and motor homes; and recreational craft such as canal barges. Some static caravans are used as permanent dwellings; in such cases EN 50291 1 is appropriate. For all other types of caravan, EN 50291 2 is appropriate. This guide is read in conjunction with EN 50291 1 and EN 50291 2 together with any additional relevant national or local regulations. This document refers to the installation of two types of apparatus: a) Type A apparatus, to provide a visual and audible alarm and an executive action in the form of an output signal that can be used to actuate directly or indirectly a ventilation or other ancillary device; b) Type B apparatus, to provide a visual and audible alarm only. This document excludes apparatus for the detection of combustible gases (see EN 50244) and for industrial installations or commercial premises.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system.
These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications.
The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages.
The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards.
Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents.
This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements for design, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system. These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications. The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards. Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents. This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62682:2022 specifies general principles and processes for the management of alarm systems based on controls system and human-machine interfaces (HMI) for facilities in the process industries. It covers all alarms to be presented to the operator through the control system, which includes alarms from basic process control systems, annunciators, packaged systems, and safety instrumented systems.
The practices in this document are applicable to continuous, batch, and discrete processes. There can be differences in implementation to meet the specific needs based on process type.
The primary function within the alarm system is to notify operators of abnormal process conditions or equipment malfunctions and support the response. The alarm systems can include both the basic process control system (BPCS) and the safety instrumented system (SIS), each of which uses measurements of process conditions and logic to generate alarms. Figure 1 illustrates the concepts of alarm and response dataflow through the alarm system. The alarm system also includes a mechanism for communicating the alarm information to the operator via an HMI, usually a computer screen or an annunciator. Additional functions of the alarm system are an alarm and event log, an alarm historian, and the generation of performance metrics for the alarm system. There are external systems that can use the data from the alarm system.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for pyrotechnic obscuration security devices as a part of an IAS. It covers application and performance and specifies the necessary tests and trials to ensure efficiency and reliability of such obscuration devices. This document is not intended to cover Hold-up alarm systems, standalone or vehicular security pyrotechnic obscuration security device. This document also gives guidelines on the criteria for design, installation, operation and maintenance of security pyrotechnic obscuration security device. NOTE This document does not deal with CE marking, chemical (REACH/CLP) or transport regulation requirements for pyrotechnical devices set forth in the relevant European regulation and harmonized standards issued for this purpose.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62682:2022 specifies general principles and processes for the management of alarm systems based on controls system and human-machine interfaces (HMI) for facilities in the process industries. It covers all alarms to be presented to the operator through the control system, which includes alarms from basic process control systems, annunciators, packaged systems, and safety instrumented systems. The practices in this document are applicable to continuous, batch, and discrete processes. There can be differences in implementation to meet the specific needs based on process type. The primary function within the alarm system is to notify operators of abnormal process conditions or equipment malfunctions and support the response. The alarm systems can include both the basic process control system (BPCS) and the safety instrumented system (SIS), each of which uses measurements of process conditions and logic to generate alarms. Figure 1 illustrates the concepts of alarm and response dataflow through the alarm system. The alarm system also includes a mechanism for communicating the alarm information to the operator via an HMI, usually a computer screen or an annunciator. Additional functions of the alarm system are an alarm and event log, an alarm historian, and the generation of performance metrics for the alarm system. There are external systems that can use the data from the alarm system.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62682:2022 specifies general principles and processes for the management of alarm systems based on controls system and human-machine interfaces (HMI) for facilities in the process industries. It covers all alarms to be presented to the operator through the control system, which includes alarms from basic process control systems, annunciators, packaged systems, and safety instrumented systems.
The practices in this document are applicable to continuous, batch, and discrete processes. There can be differences in implementation to meet the specific needs based on process type.
The primary function within the alarm system is to notify operators of abnormal process conditions or equipment malfunctions and support the response. The alarm systems can include both the basic process control system (BPCS) and the safety instrumented system (SIS), each of which uses measurements of process conditions and logic to generate alarms. Figure 1 illustrates the concepts of alarm and response dataflow through the alarm system. The alarm system also includes a mechanism for communicating the alarm information to the operator via an HMI, usually a computer screen or an annunciator. Additional functions of the alarm system are an alarm and event log, an alarm historian, and the generation of performance metrics for the alarm system. There are external systems that can use the data from the alarm system.

  • Standard
    261 pages
    English language
    sale 15% off

This European Standard specifies the characteristics of the Passenger Alarm System. The aim of the Passenger Alarm System is to:
a)   permit passengers in case of emergency situations to inform the driver;
b)   permit the driver to keep the train moving or to stop the train at a safe location;
c)   stop the train automatically:
1)   at a platform,
2)   if there is no acknowledgement by the driver.
This European Standard covers the Passenger Alarm System (PAS) fitted to the passenger carrying rolling stock and specifies:
-   the functional requirements for an alarm triggered in the driving cab (Clause 6);
-   the communication channel between the driver and passengers or on-board staff (6.4);
-   the dynamic analysis of the Passenger Alarm System (Clause 7);
-   the requirements for the degraded modes management (Clause 8);
-   the safety related requirements (Clause 9);
-   requirements for the Passenger Alarm Device and Passenger Alarm Device area (Clause 10).
This European Standard is applicable to rolling stock which are in the field of the Directive 2008/57/EC.
NOTE 1   Existing Passenger Alarm Systems may require modification to work in conjunction with vehicles that comply with this standard.
NOTE 2   Most of the requirements of UIC 541–6 are compliant with this standard.
Other communications systems named 'communication device for passengers' or 'call for aid' in the CR LOC and PAS TSI [1] are not covered by this standard.
NOTE 3    prEN 16683, Railway applications Call for aid and communication device Requirements covers these aspects.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
- Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
- Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
• Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
• Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements for the construction, testing and performance of electrically operated refrigerant fixed gas detection equipment in safety applications. This document will not specify requirements for portable locating leak detectors for refrigerant application as already covered by EN 14624:2012. This document is applicable to equipment whose primary purpose is to provide an indication, alarm and/or other output function to warn of the presence of refrigerant gases in an industrial or commercial environment and, in some cases, to initiate automatic or manual protective actions. It is applicable to equipment in which the sensor automatically generates an electrical signal when gas is present. This standard does not apply to gas detection equipment: — for non-refrigerant application; — used for air pollution monitoring; — sampling systems, which are not integral part of the gas detection equipment; — open path gas detection; — residential applications; — process control; — for applications in mines; — portable locating leak detectors for refrigerant application.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of the IEC 62676 series specifies management systems interfaces and mechanism for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus on accessing live video and retrieving recordings. The mechanism defined in this specification are not restricted to surveillance applications but also cover remote access to security systems and electronic access control systems. Configuration of devices and management systems is out of scope of this specification.
Clause 4 introduces to remote management access. Clause 5 defines a set of requirements that the protocol needs to fulfil. Clause 6 extends the token-based resource-addressing scheme of the underlying specification IEC 60839-11-31. Clause 7 describes how to retrieve information about remote resources. Clause 8 defines how to connect to devices that are not directly reachable because they are e.g. located behind firewalls.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

NEXT ACTION: TB ACTION BY 2020-01-31 (prep doc for BT meeting - Feb2021)
BT CONSULTATION FAILED (addition of Annex ZZ) ON 2020-11-10
HAS CONSULTANT ASSESSMENT BY 2020-09-24 (PUB assessment) - Compliant assessment on 2020-09-22
2020-04-8 mah: Consultant assessment at FV missing, Annex ZZ did not go to FV.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN 60079-29-1 specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the detection and measurement of flammable gas or vapour concentrations with air. The equipment, or parts thereof, is intended for use in explosive atmospheres and in mines susceptible to firedamp.
EN 60079-29-1 is applicable to flammable gas detection equipment with a measuring range up to any volume fraction as declared by the manufacturer, and which is intended to provide an indication, alarm or other output function; the purpose of which is to indicate a potential explosion hazard and in some cases, to initiate automatic or manual protective action(s).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of the IEC 62676 series specifies management systems interfaces and mechanism for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus on accessing live video and retrieving recordings. The mechanism defined in this specification are not restricted to surveillance applications but also cover remote access to security systems and electronic access control systems. Configuration of devices and management systems is out of scope of this specification. Clause 4 introduces to remote management access. Clause 5 defines a set of requirements that the protocol needs to fulfil. Clause 6 extends the token-based resource-addressing scheme of the underlying specification IEC 60839-11-31. Clause 7 describes how to retrieve information about remote resources. Clause 8 defines how to connect to devices that are not directly reachable because they are e.g. located behind firewalls.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements for design, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v). The equipment, or parts thereof, may be intended for use in explosive atmospheres (see 4.1) and in mines susceptible to firedamp. This document applies to equipment intended for monitoring oxygen deficiency and enrichment. EXAMPLE Monitoring oxygen deficiency and/or enrichment includes: - protection of human health and safety in potentially oxygen deficient atmospheres; - fire protection by monitoring areas with reduced oxygen concentration; - fire protection by monitoring oxygen concentrations exceeding that of normal ambient air. This document also applies to equipment with an oxygen measuring function for explosion protection in the case of monitoring inertisation. NOTE 1 Inertisation is an explosion protection technique where a potentially explosive atmosphere is purged with inert gas. NOTE 2 Commonly used oxygen sensors in commercial equipment for industrial application are: - electrochemical sensors (aqueous and solid electrolytes); - paramagnetic sensors; - zirconium dioxide sensors; - tunable diode laser absorption spectroscopy sensors (TDLAS). This document is applicable to equipment intended to measure reliably the oxygen concentration, to provide an indication, alarm or other output function, the purpose of which is to give a warning of a potential hazard and, in some cases, to initiate automatic or manual protective action(s), whenever the level exceeds or falls below an alarm set point. This document is applicable to equipment, including integral sampling systems of aspirated equipment, intended to be used for commercial, industrial and non-residential safety applications. This document does not apply to external sampling systems, or to equipment of laboratory or scientific type, or to medical equipment, or to equipment used only for process monitoring and/or control purposes. For equipment used for sensing the presence of multiple gases, this document applies only to the measurement of oxygen. This document is also applicable to equipment using optical principles (e.g. TDLAS), where the optical transmitter and receiver or the optical transceiver (i.e. combined transmitter and receiver) and a suitable reflector are not located in a common enclosure. However, in this case it will be necessary to modify the test conditions described in Clause 5.3 and to introduce supplementary tests to Clause 5.4 of this document. Such supplementary tests will include alignment, beam block fault, long range operation. Guidance to appropriate modification of the test conditions and supplementary tests can be taken from EN 60079 29 4. Modifications of the test conditions as well as modified and supplementary tests are expected to be agreed between the manufacturer and test laboratory and identified and described in the test report.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document covers the risk of entrapment of users in the car and in the well, and gives the technical requirements for the alarm systems for passenger and goods passenger lifts, as described in the EN 81 series.
This includes:
-   activation of the alarm,
-   transmission of the alarm,
-   information for use and maintenance,
-   site testing to verify the requirements of this document have been met before the lift is used.
Excluded are:
-   the failure of the communication network (see Annex A), including mobile network signal strength or similar;
-   the failure of the network power supply such that all the lifts in a geographical area create entrapment simultaneously.
This document is not applicable to alarm systems for lifts installed before the date of its publication.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62676-2-31:2019 defines procedures for communication between network video clients and video transmitter devices. This new set of specifications makes it possible to build network video systems with devices and receivers from different manufacturers using common and well-defined interfaces. These interfaces cover functions such as media and imaging configuration, real-time streaming of audio and video, pan, tilt and zoom (PTZ) control as well as analytics. The management and control interfaces defined in this document are described as web services. Annex F contains XML schema and Web Service Description Language (WSDL) definitions for the introduced network services. This first edition, together with IEC 60839-11-31 and IEC 62676-2-32, cancels and replaces IEC 62676-2-3:2013. This edition includes the following significant technical changes with respect to IEC 62676-2-3:2013: a) addition of the Media2 service; b) additional methods for the imaging service; c) method duplicates from the device IO service have been removed; d) both the display and analytics device service are no more included.

  • Standard
    287 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62676-2-32:2019 specifies the web service interface for the configuration of the recording of video, audio and metadata. Additionally, associated events are defined. Web service usage is outside the scope of this document. Please refer to the IEC 60839‑11-31 for more information. This first edition, together with IEC 60839-11-31 and IEC 62676-2-31, cancels and replaces IEC 62676-2-3:2013. This edition includes the following significant technical changes with respect to IEC 62676-2-3:2013: a) an export file format has been added.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62676-2-33:2022 specifies management systems interfaces and mechanisms for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus on accessing live video and retrieving recordings. The mechanisms defined in this document are not restricted to surveillance applications, but also cover remote access to security systems and electronic access control systems. Configuration of devices and management systems is out of the scope of this document.

  • Standard
    50 pages
    English and French language
    sale 15% off

This document specifies minimum requirements for secure connection and session for remote access to one or more alarm systems, for example fire safety systems, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems, video surveillance systems, and social alarm systems.
This document specifies the requirements for the performance, reliability, integrity, and security characteristics of a Remote Access Infrastructure.
This document specifies the requirements for a Remote Access Infrastructure between a Remote Access Client and an alarm system at the supervised premises and may be either integrated as part of the ATS or a separate infrastructure. In either case, the requirements of this European technical specification should apply.
This document does not cover the provision of functions and features on the alarm system.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the technical requirements for the alarm systems for passenger and goods passenger lifts, as described in the EN 81 series.
This includes:
-   activation of the alarm,
-   transmission of the alarm,
-   information for use and maintenance,
-   site testing to verify the requirements of this document have been met before the lift is used.
Excluded are:
-   the failure of the communication network (see Annex A), including mobile network signal strength or similar;
-   the failure of the network power supply such that all the lifts in a geographical area create entrapment simultaneously.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant to lift, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
-   risk of entrapment of users in the car and in the well.
This document is not applicable to alarm systems for lifts installed before the date of its publication.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics of the Passenger Alarm System. The aim of the Passenger Alarm System is to:
a)   permit passengers in case of emergency situations to inform the driver;
b)   permit the driver to keep the train moving or to stop the train at a safe location;
c)   stop the train automatically:
1)   at a platform,
2)   if there is no acknowledgement by the driver.
This European Standard covers the Passenger Alarm System (PAS) fitted to the passenger carrying rolling stock and specifies:
-   the functional requirements for an alarm triggered in the driving cab (Clause 6);
-   the communication channel between the driver and passengers or on-board staff (6.4);
-   the dynamic analysis of the Passenger Alarm System (Clause 7);
-   the requirements for the degraded modes management (Clause 8);
-   the safety related requirements (Clause 9);
-   requirements for the Passenger Alarm Device and Passenger Alarm Device area (Clause 10).
This European Standard is applicable to rolling stock which are in the field of the Directive 2008/57/EC.
NOTE 1   Existing Passenger Alarm Systems may require modification to work in conjunction with vehicles that comply with this standard.
NOTE 2   Most of the requirements of UIC 541–6 are compliant with this standard.
Other communications systems named 'communication device for passengers' or 'call for aid' in the CR LOC and PAS TSI [1] are not covered by this standard.
NOTE 3    prEN 16683, Railway applications Call for aid and communication device Requirements covers these aspects.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies minimum requirements for secure connection and session for remote access to one or more alarm systems, for example fire safety systems, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems, video surveillance systems, and social alarm systems. This document specifies the requirements for the performance, reliability, integrity, and security characteristics of a Remote Access Infrastructure. This document specifies the requirements for a Remote Access Infrastructure between a Remote Access Client and an alarm system at the supervised premises and may be either integrated as part of the ATS or a separate infrastructure. In either case, the requirements of this European technical specification should apply. This document does not cover the provision of functions and features on the alarm system.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. NOTE For caravan holiday homes EN 50291-1 applies. This European Standard specifies apparatus designed to operate in the event of an escape of carbon monoxide and to provide a visual and audible alarms only (Type B of EN 50291-1), or to provide visual and audible alarms and an executive action in the form of an output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device (Type A of EN 50291-1). This European Standard excludes apparatus - for the detection of combustible gases, other than carbon monoxide itself (see EN 50194 1), - for the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or commercial premises, - for CO measurement for smoke and fire detection.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies test methods and performance requirements for electrical apparatus for the detection of
combustible gases designed for continuous operation in a fixed installation in recreational vehicles and similar
premises.
NOTE 1 For caravan holiday homes EN 50194-1 applies.
This document specifies apparatus designed to operate in the event of an escape of liquefied petroleum gas (LPG)
and/or petrol (gasoline) vapour and to provide a visual and audible alarm and an executive action in the form of an
output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device (Type A of
EN 50194-1).
The document excludes apparatus for the detection of toxic gases such as carbon monoxide (see EN 50291).
Apparatus complying with this document is not considered suitable for industrial or commercial installations for
which EN 60079-29-1 apply.
NOTE 2 Apparatus tested in accordance with EN 60079-29-1 will not necessarily comply with this standard.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for Security Fog Devices as part of an I&HAS. It covers application and performance and also gives the necessary tests and trials to ensure efficiency and reliability of such obscuration devices. This document also gives guidance on the criteria for design, installation, operation and maintenance of Security Fog Devices.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IT NC submits to CLC TC79 the request for an amendment work of the EN 62820-1-1:2016, within CLC/TC 79/WG 15

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution. For the purpose of this standard, the term "alarm" is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed fire fighting systems, intrusion and hold-up alarm systems, access control systems, video surveillance systems, social alarms systems and combinations of such systems. This standard gives requirements for two categories of ARC, category I and category II. A category I ARC will be designed, constructed and operated to a higher standard with respect to construction, security and integrity than a category II ARC. The categorization is determined according to the type(s) of alarm messages handled. Category I: ARCs handling messages from security applications: - I&HAS’s; - access control systems; - VSS in security applications that require an emergency response (for example loss prevention); - people monitoring, lone workers and object tracking systems for security applications; - alarm messages handled by category II ARCs; - combinations of the above systems. Category II: ARC’s handling messages from non-security applications: - fire alarm systems; - fixed firefighting systems; - social alarm systems; - audio/video door entry systems; - VSS in non-security applications (for example traffic flow); - people monitoring, lone workers and object tracking systems for non-security applications; - elevator emergency systems; - combinations of the above systems. The requirements apply to ARC’s (whether established in single or multiple sites) monitoring and processing alarms generated by systems installed at other locations and also to ARC’s monitoring solely alarms from systems within their own site. The standard includes functional and specific requirements supporting the services of an ARC. The standard does NOT apply to - alarm systems used for non-civil purposes; - alarm systems for medical or health applications.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is for microwave detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130-5). This document does not include requirements for detectors intended for use outdoors.
The purpose of the detector is to emit microwave signals and analyse the signals that are returned to detect an intruder and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system.
The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade.
Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions.
Requirements for system interconnections are not included in this document.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is for passive infrared detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131 1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130 5). This document does not include requirements for detectors intended for use outdoors.
The purpose of the detector is to detect the broad spectrum infrared radiation emitted by an intruder, to analyse the resulting signals and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system.
The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade.
Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions.
Requirements for system interconnections are not included in this document.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document includes requirements for warning devices used for notification in intrusion and hold up alarm systems installed in buildings. Four grades of warning device are described corresponding to each of the four security grades given in EN 50131-1. Requirements are also given for four environmental classes covering applications in indoor and outdoor locations as specified in EN 50130-5. This document does not deal with requirements for compliance with EC regulatory Directives, such as the EMC Directive, Low Voltage Directive, etc. except that it specifies the equipment operating conditions for EMC susceptibility testing as required by EN 50130-4.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IT NC submits to CLC TC79 the request for an amendment work of the EN 62820-1-1:2016, within CLC/TC 79/WG 15

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is for microwave detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131 1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130 5). This document does not include requirements for detectors intended for use outdoors. The purpose of the detector is to emit microwave signals and analyse the signals that are returned to detect an intruder and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system. The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade. Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions. Requirements for system interconnections are not included in this document.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 60839 defines the Web services interface for electronic access control systems.
This includes listing electronic access control system components, their logical composition,
monitoring their states and controlling them. It also includes a mapping of mandatory and
optional requirements in accordance with IEC 60839-11-1:2013, as covered by Annex B.
This document applies to physical security only. Physical security prevents unauthorized
personnel, attackers or accidental intruders from physically accessing a building, room, etc.
Web services usage and device management functionality are outside the scope of this
document. Refer to IEC 60839-11-31:2016 for more information.
This document does not in any way limit a manufacturer to add other protocols or extend the
protocol defined here. For rules on how to accomplish this, refer to IEC 60839-11-31:2016.

  • Standard
    185 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the minimum requirements for secure remote services (e. g. via IP connections) to the following systems:
a) fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control
systems,
b) security systems including, but not limited to, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems,
c) social alarm systems,
d) a combination of such systems
The scope doesn´t cover:
a) the alarm transmission infrastructure,
b) the use of remote access performed by end-users

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document gives guidance on the selection, installation, use and maintenance of electrical
equipment used for the measurement of toxic gases and vapours in workplace atmospheres.
The primary purpose of such equipment is to ensure safety of personnel and property by
providing an indication of the concentration of a toxic gas or vapour and warning of its presence.
This document is applicable to equipment whose purpose is to provide an indication, alarm or
other output function to give a warning of the presence of a toxic gas or vapour in the
atmosphere and in some cases to initiate automatic or manual protective actions. It is applicable
to equipment in which the sensor automatically generates an electrical signal when gas is
present.
For the purposes of this document, equipment includes:
a) fixed equipment;
b) transportable equipment, and
c) portable equipment.
This document is intended to cover equipment defined within IEC 62990-1, but can provide
useful information for equipment not covered by that document.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements for the performance, reliability and security characteristics of alarm transmission systems. It covers the general requirements for connections providing signalling between an alarm system at a supervised premises and annunciation equipment at an alarm receiving centre. EN 50136-1 Applies to transmission systems for all types of alarm messages such as fire, intrusion, access control, social alarm, etc. Different types of alarm system may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. These messages are also considered to be alarm messages. The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 60839 defines the Web services interface for electronic access control systems. This includes listing electronic access control system components, their logical composition, monitoring their states and controlling them. It also includes a mapping of mandatory and optional requirements in accordance with IEC 60839-11-1:2013, as covered by Annex B. This document applies to physical security only. Physical security prevents unauthorized personnel, attackers or accidental intruders from physically accessing a building, room, etc. Web services usage and device management functionality are outside the scope of this document. Refer to IEC 60839-11-31:2016 for more information. This document does not in any way limit a manufacturer to add other protocols or extend the protocol defined here. For rules on how to accomplish this, refer to IEC 60839-11-31:2016.

  • Standard
    185 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard provides for security grades 1 to 4, (see EN 50131-1) specific or non-specific wired or wire-free lock state contacts, and includes the requirements for four environmental classes covering applications in internal and outdoor locations as specified in EN 50130-5. Lock state contacts are installed in windows or doors and windows or doorframes to allow to monitor the lock/unlock status only or the lock/unlock status combined with the open/close status of a window/door simultaneously and are as such located in supervised premises. They provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system. A detector fulfils all the requirements of the specified grade. Functions additional to the mandatory functions specified in this European Standard may be included in the detector, providing they do not influence the correct operation of the mandatory functions. The combination of the two separate units of the lock state contact is referred to in the body of this European Standard as the detector. This European Standard does not apply to system interconnections.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the minimum requirements for the provision of secure remote services via a remote access infrastructure (RAI) carried out either at site or off-site (e.g. via IP connections) to the following systems:
a)   fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems;
b)   security systems including, but not limited to, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems;
c)   social alarm systems;
d)   emergency sound systems;
e)   a combination of such systems;
f)   management systems connected to systems a) – e).
This document does not cover:
a)   at site services without using remote connection;
b)   the monitoring and alarm receiving services by the MARC, which are described in the EN 50518.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60839-11-33:2021 defines the Web services interface for electronic access control systems. This includes listing electronic access control system components, their logical composition, monitoring their states and controlling them. It also includes a mapping of mandatory and optional requirements in accordance with IEC 60839-11-1:2013, as covered by Annex.
This document applies to physical security only. Physical security prevents unauthorized personnel, attackers or accidental intruders from physically accessing a building, room, etc. Web services usage and device management functionality are outside the scope of this document.
The document specifies only the data and control flow between a client and the services without reference to any physical device as the services required to implement a compliant electronic access control system (EACS) are not necessarily implemented on a single device, i.e. all services can be run on a control panel, event aggregator software on PC, etc.

  • Standard
    364 pages
    English and French language
    sale 15% off

This document defines the terms and definitions that are used throughout EN 54 series of standards. It gives the principles on which each part of the series has been based and describes the functions carried out by the components of a fire detection and fire alarm system.
This document applies to fire detection and fire alarm systems for buildings and civil engineering works.
This document does not apply to smoke alarm devices which are covered by EN 14604.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements, performance criteria and testing procedures for PS to be used as part of Intrusion and Hold up Alarm Systems. The PS will either be an integral part of an I&HAS component or stand-alone. The control functions of the PS may be incorporated as part of the PS device, or may be provided by another I&HAS component, e.g. a CIE.
This European Standard is not applicable when the PS requirements for I&HAS components are included within the relevant product standard.
The requirements correspond to each of the four security grades given in the European Standard EN 50131 1, Alarm Systems – Intrusion and Hold-Up Systems - Part 1: System requirements. Requirements are also given for four environmental classes covering applications in indoor and outdoor locations.
This standard covers:
a)   mandatory functions which will be provided on all PS; and
b)   optional functions which may be provided.
This European Standard does not deal with requirements for compliance with EC regulatory Directives, such as the EMC Directive, Low Voltage Directive, etc. except that it specifies the equipment operating conditions and reduced functional test for EMC susceptibility testing as required by EN 50130 4.
Other functions associated with I&HAS not specified in this standard may be provided. Such functions will not affect the requirements of any mandatory or optional functions.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the minimum requirements for the performance, reliability and security characteristics of interconnections, alarm transmission systems and communications within a social alarm system.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day