This European Standard provides all of the information required in order to efficiently perform, and in standardized conditions, the determination, the declaration and the verification of noise emission values of refuse collection vehicles.
The use of this annex ensures the reproducibility of the determination of noise emission values within the limits established for the accuracy grade of the basic standard used to determine noise emission values. The methods used to determine these noise emission values, corresponding to this normative annex, are grade 2 accuracy measurement methods.
This standard deals with the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501 series
This European Standard applies to machines which are manufactured after the date of approval of this standard by CEN.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the standard for exchanging stationary waste collection container information between the collection container system and the back-office systems.
This document defines the way to exchange data between the "Communication Management System" of the collection container and the "Back-Office Systems".
The exchange of data between the "Collection Container Systems" and the "Communication Management Systems" or the "Back-Office Systems" is excluded.
This document targets two streams of information in the waste processing industry:
-   The processing of transactions and system information for the deposit of waste from the communication management systems to the back office systems.
-   The processing of authorization and configuration information from the back-office systems to the communication management systems.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the standard for exchanging stationary waste collection container information between the collection container system and the back-office systems.
This document defines the way to exchange data between the "Communication Management System" of the collection container and the "Back-Office Systems".
The exchange of data between the "Collection Container Systems" and the "Communication Management Systems" or the "Back-Office Systems" is excluded.
This document targets two streams of information in the waste processing industry:
-   The processing of transactions and system information for the deposit of waste from the communication management systems to the back office systems.
-   The processing of authorization and configuration information from the back-office systems to the communication management systems.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This CWA provides guidance for the implementation of biowaste selective collection schemes.
This CWA also paves the way to increase citizen engagement, as this is crucial for the successful implementation of urban biowaste selective collection schemes.
It is intended to be used by city managers and municipal waste managers with interest in implementing the selective collection of urban biowaste to produce high quality biowaste (i.e., minimal presence of non-required fractions) which can be then used in robust valorization processes with attractive business cases.

  • Standardization document
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This CWA provides guidance for the implementation of biowaste selective collection schemes.
This CWA also paves the way to increase citizen engagement, as this is crucial for the successful implementation of urban biowaste selective collection schemes.
It is intended to be used by city managers and municipal waste managers with interest in implementing the selective collection of urban biowaste to produce high quality biowaste (i.e., minimal presence of non-required fractions) which can be then used in robust valorization processes with attractive business cases.

  • Standardization document
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the essential requirements of stationary systems for production of brines for winter road maintenance and includes tests of these requirements. Installation boundary: chloride and water inlet to the saturator, brine outlet to the spreading machine. Within the scope are materials, brine storage and brine loading/unloading equipment also. Mobile systems for production of brines in situ are not content of this document.
The following points are not covered by this document:
-   System and construction requirements;
-   Requirements according to national and European legislations.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives general guidelines for the hydraulic placement of extractive wastes applicable, in particular, to the extractive industries.
The scope of this European Standard includes any dam, confining embankment or other structure serving to contain, retain, confine or otherwise support such wastes on surface in a terrestrial environment.  
This standard therefore addresses the characterisation of the extractive waste for the purposes of hydraulic placement in the MWF both as part of the confining embankment and for safe storage, and in addition:
- specifies minimum requirements for the data to be acquired before the design and execution stage of a hydraulic fill project;
- provides guidelines for the selection of the type of confining embankment appropriate for the selected site;
- provides guidelines for the selection and characterisation of the construction materials;
- establishes general principles on how to design and execute the hydraulic fill project from pre deposition through operation to closure and rehabilitation;
- provides guidelines for monitoring and quality control of all stages of the hydraulic fill project to ensure long-term safety and stability.

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the essential requirements of stationary systems for production of brines for winter road maintenance and includes tests of these requirements. Battery limits: chloride and water inlet to the saturator, brine outlet to the spreading machine. Within the scope are storage and loading/unloading equipment also.
The following points are not covered by this standard:
   - System and construction requirements;
   - Requirements according national legislations.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies three methods for the digestion of soil, treated biowaste, sludge and waste by the use of an acid mixture composed of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4) or hydrochloric (HCl), nitric (HNO3) and hydrofluoric (HF) acid as the digestion solution.
Digestion with these acids is effectively considered as a total decomposition of the sample. For a broad range of samples the extracted analyte concentrations will reflect the total content in the sample.
This document is applicable for the following elements:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), nickel (Ni), phosphorus (P), potassium (K), selenium (Se), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), thallium (Tl), tin (Sn), titanium (Ti), vanadium (V), and zinc (Zn).
This document can also be applied for the digestion of other elements, provided the user has verified the applicability.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to side loaded refuse collection vehicle (RCV), as defined in prEN 1501-1.
This document deals with all significant hazards, hazardous situations and events relevant to the side loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the side loaded RCV so as to ensure that it is fit for its intended function and can be operated, moved, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the side loaded RCV.
This document describes and defines the safety requirements of side loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s) including the loader cranes and the interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to front loaded refuse collection vehicle (RCV), as defined in 3.2 with closed system defined in 3.13.
This document deals with all significant hazards, hazardous situations and events relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the front loaded RCV so as to ensure that it is fitted for its function and can be operated adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the front loaded RCV.
prEN 1501-3 describes and defines the safety requirements of front loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s), loader cranes and their interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999. Additional requirements to loader cranes installed as a loading device for handling containers for refuse or recyclable material on RCVs are defined in prEN 1501 5.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   operation in severe conditions e.g. extreme environmental conditions such as:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This document describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in prEN 1501-5. Safety requirements for loader cranes are defined in EN 12999.
This European Standard is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below -25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with all significant hazards, hazardous situations and events relevant to lifting devices used for the emptying of designated refuse containers into RCVs and their fitting onto the RCVs when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer throughout their foreseeable lifetime as defined in Clause 4.
This document is applicable to the design and construction of the refuse container lifting devices and the mounting of other lifting devices so as to ensure that they are fitted for their function and can be operated, adjusted and maintained during their entire lifetime. It is not applicable to the end of life of the lifting devices.
This document describes and gives the safety requirements of the lifting devices for emptying refuse containers and their interfaces with the corresponding parts of the RCVs and will be used in conjunction with prEN 1501-1 for the rear, side and front loaded RCVs. It refers to EN 1501-4 for the noise test code.
This document is not applicable to:
-   operation in severe conditions e.g. extreme environmental conditions such as:
-   temperatures below −25 °C and above +40 °C;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   lifting and transportation of persons;
-   emptying refuse containers other than those manufactured according to EN 840 (all parts), EN 12574 (all parts), EN 13071 (all parts), and those described as paladin, diamond, skip containers;
-   loading bulky refuse by means of platform or forks;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships;
-   fitting and operation on stationary compactors.
This document is not applicable to machinery which is manufactured before the date of its publication by CEN.

  • Standard
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the principles and framework for comprehensive evaluation of industrial wastewater treatment reuse processes, including: a) establishing goals and scope; b) illustrating the evaluation procedure; and c) determination of evaluation indicators (technology indicator/sub-indicators, environment indicator/sub-indicators, resource indicator/sub-indicators, economy indicator/sub-indicators). This document describes how to comprehensively evaluate industrial wastewater treatment reuse processes using the proposed calculation approaches and recommended indicators. It does not specify methodologies for single evaluation indicators. The document is intended to provide assistance to a broad range of industrial wastewater treatment and reuse project stakeholders including professionals (planning, management, designers, and operators), administrative agencies (monitoring, assessment, regulation and administration) and local authorities. This document is applicable to a) evaluating comparing and selecting industrial wastewater treatment reuse processes, b) implementing continuous improvements, c) upgrading processes and improving performance for existing treatment and reuse facilities. The intended application of the comprehensive evaluation result is considered within the goal and scope definition.

  • Standard
    31 pages
    English language
    sale 15% off
  • Draft
    31 pages
    English language
    sale 15% off

This European Standard specifies the safety requirements for the design, manufacture and information for the safe use of compactors that compact waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials.
This European Standard applies to:
-   compactors using a horizontally moving screw, pendulum or plate as compacting part and where the materials move horizontally; and
-   compactors that are mechanically fed and/or fed by hand.
These compactors can be:
-   static compactors;
-   transportable compactors;
-   traversing systems.
The scope includes:
-   any integral mechanical feed equipment (e.g. bin lift);
-   feed hoppers/openings;
-   any integral pre-conditioning equipment in the hopper (e.g. perforators, pre-crushing devices and shredders);
-   any integral material flow control equipment;
-   the interface between the compactor and any feed equipment (except those excluded from the scope).
The scope of this European Standard does not cover:
-   compactors that are covered by EN 1501 (all parts);
-   underground compactors, however if these compactors can be used above ground this standard applies;
-   compactors using thermal technologies for compaction;
-   vacuum compactors;
-   compactors where materials are compacted vertically;
-   containers for static compactors, however the interface between the compaction unit and the container is included;
-   bins in which materials are collected for feeding into the compactor;
-   any up-stream pre-treatment equipment that is not integral to the machine and is used to treat the materials before they are fed into the feed opening of the compactor;
-   vehicles including lifting equipment used to collect and transport the compactor or container;
-   cranes, lift trucks or other transportable plant used to load materials into the feed hopper/opening and the hazards arising out of using this equipment to load;
-   any suction or dust control equipment.
This European standard does not cover the lifting and transport of transportable compactors.
This European Standard does not apply to hazards arising from the materials being processed (e.g. asbestos, clinical waste, aerosol containers).
All hazards mentioned in Clause 4 are dealt with in this European Standard.
This European Standard is not applicable for compactors which are manufactured before the date of its publication as an EN.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is used in the framework of the waste processing industry and defines the processing of relevant information for the deposit of garbage between access chips and the collection container systems.
This document is not intended to be used for container identification.
NOTE   The container identification is covered by EN 14803.
This document provides the technical specification and the restrictions that are defined on top of ISO/IEC 14443-1, ISO/IEC 14443-2 and ISO/IEC 14443-3.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-10-21 - TC - Addition of figure designations "A" and "B" in Figure 2

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-10-21 - TC - Addition of figure designations "A" and "B" in Figure 2

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies three methods for the digestion of soil, treated biowaste, sludge and waste by the use of an acid mixture composed of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4) or hydrochloric (HCl), nitric (HNO3) and hydrofluoric (HF) acid as the digestion solution.
Digestion with these acids is effectively considered as a total decomposition of the sample. For a broad range of samples the extracted analyte concentrations will reflect the total content in the sample.
This document is applicable for the following elements:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), nickel (Ni), phosphorus (P), potassium (K), selenium (Se), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), thallium (Tl), tin (Sn), titanium (Ti), vanadium (V), and zinc (Zn).
This document can also be applied for the digestion of other elements, provided the user has verified the applicability.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard provides the essential safety, health and ergonomic requirements for mobile waste and recycling containers according to EN 840-1 to EN 840-4, not including hazardous wastes containers.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives the test methods for mobile waste and recycling containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done.
This European Standard is applicable to mobile waste and recycling containers with capacities up to 1 700 l.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements on design and construction of bulk spreaders and sprayers, trailer spreaders and towed spreaders with speed related spreading for winter service. This document also deals with information about the minimum content required for operating manuals.
The document is valid for machines, which are used to spread the following spreading agents:
-   not pre-wetted and pre-wetted spreading agents;
-   abrasive spreading agents;
-   liquid spreading agents (brine).
This document is not applicable to:
-   requirements for registration and approval;
-   requirements made by automobile manufacturers;
-   requirements on safety, which are dealt with in FprEN 17106 1 and FprEN 17106 3 2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides guidance on, the evaluation and comparison of wastewater softening and desalination processes for industrial wastewater reclamation and reuse with specific consideration for the following six: 1) chemical precipitation; 2) ion exchange; 3) nanofiltration (NF); 4) reverse osmosis (RO); 5) electrodialysis (ED) and 6) electrodeionization (EDI). This document provides guidance on the characterisation of both influent and effluent quality (e.g. hardness, alkalinity, etc.) and the effects of these processes on those constituents. The purpose of softening and desalination is only for the reuse usages that have requirements for hardness and salinity, such as cooling circulating water, boiler water, production process water, and cleaning water. This document includes the following sub-processes of wastewater softening and desalination processes: a) wastewater softening processes based on chemical precipitation, ion exchange and NF, which aim to remove hardness ions, such as Mg2+ and Ca2+; b) desalination processes based on ion exchange, RO, ED, EDI and NF, which aim to remove the most of total dissolved solids (TDS). This document is applicable to: a) industrial saline wastewater, which has been pre-treated to remove most of the organic matters if necessary; b) the selection or design of wastewater softening and desalination processes for reuse of wastewater from industries.

  • Standard
    15 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off

This document gives the possibility to certify a model of vehicle-mounted or (trailer) dragged spreading machines for winter service with standard parameters, leaving the possibility to the manufacturer to evolve in performances. At the same time, information is given on the minimum content required for operating manuals.
This document is valid for machines which are used to spread the following media:
-   not pre-wetted spreading agent (solid spreading agent);
-   pre-wetted spreading agent;
-   liquid spreading agent (brine).
The following points are not covered by this document:
-   requirements for registration and approval;
-   requirements made by automobile manufacturers;
-   requirements on EN 15518 3.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives the test methods for mobile waste and recycling containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done.
This European Standard is applicable to mobile waste and recycling containers with capacities up to 1 700 l.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard provides the essential safety, health and ergonomic requirements for mobile waste and recycling containers according to EN 840-1 to EN 840-4, not including hazardous wastes containers.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for the container lifting connections to be used during the loading and unloading operations of the containers top lifted and bottom emptied.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements of stationary containers, top lifted and bottom emptied, used for collection of solid non-hazardous wastes, with capacity up to 5 000 l.
This document specifies general characteristics of such containers and their accessories, test methods and safety requirements as well as recommendations for installation, maintenance and cleaning operations.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the additional requirements for underground or partly underground systems top lifted and bottom emptied, used for collection of solid non-hazardous wastes with a capacity up to 5 000 l.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for the container lifting connections to be used during the loading and unloading operations of the containers top lifted and bottom emptied.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The standard specifies additional requirements for underground or partly underground systems, top lifted bottom emptied for collection of solid non hazardous waste in stationary waste containers up to 5 000 l.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document covers the design, manufacture, performance, operation, functioning and testing of incinerators intended to incinerate garbage and other shipboard wastes generated during a ship's normal service (i.e. maintenance, operational, domestic and cargo-associated wastes). This document is applicable to incinerator plants with capabilities up to 4 000 kW per unit. This document is not applicable to systems on special incinerator ships, e.g. for burning industrial wastes such as chemicals, manufacturing residues, etc. It does not address the electrical supply to the unit, nor the foundation connections and stack connections. This document provides emission requirements in Annex A, location requirements in Annex B, and flue gas temperature requirements in Annex D. Recommendations for incinerators integrated with heat recovery units are given in Annex C. The activities associated with this document can involve hazardous materials, operations and equipment. It does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    22 pages
    English language
    sale 15% off

This document specifies requirements of stationary containers, top lifted and bottom emptied, used for
collection of solid non-hazardous wastes, with capacity up to 5 000 l.
This document specifies general characteristics of such containers and their accessories, test methods
and safety requirements as well as recommendations for installation, maintenance and cleaning
operations.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

In the framework of EU Directive 99/31/EC [1] and EU Directive 2000/76/EC [2] halogens and sulfur need to be determined on waste samples. The implementation of the combustion-IC technique would allow in one single run the combustion of the sample followed by the determination of the halogens and sulfur with ion chromatography. Moreover, this instrument may be provided with a sample carrousel for both solids and liquids, allowing an automation of these type of analyses.
Recent developments of the C-IC technology have made this technique interesting for the determination of halogens and sulfur in waste samples. Therefore, a document on the current progress of the C-IC technology was prepared, including the evaluation of the performance of different commercially available systems and the presentation of analytical results obtained on certified reference materials and waste samples.

  • Technical report
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the relevant characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers in the construction of liquid waste disposal sites and in the construction of transfer stations and secondary containment for the storage of liquid waste on a waste disposal site only and the appropriate test methods to determine these characteristics.
The intended use of these products is to control the leakage of fluids through the construction. This document is not applicable to geotextiles or geotextile-related products. This document provides for the evaluation of conformity of the product to this document.
This document defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the relevant characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers in the construction of solid waste storage and solid waste disposal sites, and the appropriate test methods to determine these characteristics.
The intended use of these products is to control the leakage of fluids through the construction. This document is not applicable to geotextiles or geotextile-related products. This document provides for the evaluation of conformity of the product to this document.
This document defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the general characteristics, test methods and requirements for sacks, bags and bin liners, made from plastic films, used for household waste collection, or household selective waste collection including collection of biodegradable waste for organic recycling (biodegradation and composting).
For the purpose of this European Standard biodegradable and compostable sacks, including ties if any, are those which comply with EN 13432.
This European standard applies only to sacks, bags and bin liners for which the first use is for household waste collection, or household selective waste collection.
NOTE   For editorial reasons, in this document the terms "sack" and "bag" are synonymous.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN 12574 specifies essential safety and health requirements for stationary waste containers (in the text also called containers), not including special containers for hazardous waste.
NOTE   To help in the understanding of the requirements they are not split into separate safety, ergonomic and health sections but are divided into chapters dealing with constructional units.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN 12574 specifies the test methods for stationary waste containers (in the text also called containers) according to prEN 12574-1. It also specifies the target requirements to be reached either during or after the tests.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN 12574 specifies dimensions and requirements of stationary waste containers (in the text also called containers) without wheels or with wheels for positioning purposes only, with flat or dome lid(s) and capacities up to 10 000 l for trunnion, double trunnion or pocket lifting devices.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This draft European Standard specifies the general characteristics, test methods and requirements for sacks, bags and bin liners, made from plastic films, used for household waste collection, or household selective waste collection including collection of biodegradable waste for organic recycling (biodegradation and composting).
For the purpose of this draft European Standard biodegradable and compostable sacks, including ties if any, are those which comply with EN 13432.
This draft European standard applies only to sacks, bags and bin liners for which the first use is for household waste collection, or household selective waste collection.
NOTE   For editorial reasons, in this document the terms "sack" and "bag" are synonymous.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day