This European Standard specifies requirements and test methods for rain caps that are used as components, subject to flue gas, in order to prevent rain entry into the chimneys. Rain caps already tested together with system chimney products or other chimney components, e.g. terminals, are not covered by this standard. Rain caps incorporating a bird guard are also included. It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and test methods for flue gas silencers made of metal that are used as accessories in order to reduce the noise level of combustions appliances.
The standard covers silencers in the connecting flue pipes and on top of chimneys.
This standard does not cover silencers installed as chimney sections. This standard excludes active silencers.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the requirements and test methods for flue dampers that are used as
components, carrying flue gas, in order to limit the flow in a chimney.
Flue dampers may be manually adjusted, sited in connecting flue pipes or chimneys, in order to reduce the burning rate (solid fuel stoves/fireplaces) or to work as a shut-off slide preventing back flow of soot during cleaning of the chimney, or mechanically driven for reducing/closing the flue, in order to reduce the Stand-by losses or to prevent the backflow of the flue gas e.g. in case of multi-served chimneys.
This European standard covers only flue dampers incorporated in a housing and installed inside a building. Flue dampers already tested together with system chimney products or other chimney components, e.g. flue liners, connecting flue pipes, are not covered by this standard.
This European standard also specifies the requirements for marking, manufacturers’ instruction, product
information, Assessment and Verification of Constancy of Performance (AVCP), cleaning and maintenance.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements and test methods for access components comprising a frame and a door or doors which provide access to the flue of a chimney for the purpose of inspection or cleaning.
Access components for higher nominal working temperature than 450 °C, positive pressure and wet applications are not covered by this standard.
The standard is limited to access components with a door opening area up to 0,27 m2.
Products not freely ventilated are excluded from this standard.
This standard also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.
Access components already tested together with system chimney products or other chimney components, e.g. flue liners, are not covered by this standard.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives details for the classification of gas  appliances according to the method of supplying combustion air  and of evacuating the products of combustion. […]  This European Standard is a guide for the harmonization of  products standards, for the preparation of installation standards  and for the common understanding of the types of gas Appliances.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN 13384 specifies methods for calculation of the thermal and fluid dynamic characteristics of chimneys serving more than one heating appliance.
This part of EN 13384 covers both the cases, either
a)   where the chimney is connected with more than one connecting flue pipe from individual or several appliances in a multi-inlet arrangement; or
b)   where the chimney is connected with an individual connecting flue pipe connecting more than one appliance in a cascade arrangement.
The case of multiple inlet cascade arrangement is covered by the case a).
This part of EN 13384 deals with chimneys operating under negative pressure conditions (there can be positive pressure condition in the connecting flue pipe) and with chimneys operating under positive pressure conditions and is valid for chimneys serving heating appliances for liquid, gaseous and solid fuels.
This part of EN 13384 does not apply to:
-   chimneys with different thermal resistance or different cross-section in the various chimney segments. This part does not apply to calculate energy gain;
-   chimneys with open fire places, e.g. open fire chimneys or chimney inlets which are normally intended to operate open to the room;
-   chimneys which serve different kinds of heating appliances regarding natural draught, fan assisted, forced draught or combustion engine. Fan assisted appliances with draught diverter between the fan and the chimney are considered as natural draught appliances;
-   chimneys with multiple inlets from more than 5 storeys. (This does not apply to balanced flue chimney.);
-   chimneys serving heating appliances with open air supply through ventilation openings or air ducts, which are not installed in the same air supply pressure region (e.g. same side of building).
For positive pressure chimneys this part only applies if any heating appliance which is out of action can be positively isolated to prevent flue gas back flow.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies methods for the calculation of the thermal and fluid dynamic characteristics of chimneys serving one heating appliance.
The methods in this part of this European Standard are applicable to negative or positive pressure chimneys with wet or dry operating conditions. It is valid for chimneys with heating appliances for fuels subject to the knowledge of the flue gas characteristics which are needed for the calculation.
The methods in this part of this European Standard are applicable to chimneys with one inlet connected with one appliance. The methods in Part 2 of this European Standard are applicable to chimneys with multiple inlets and one inlet with multiple appliances. Part 3 describes methods for the development of diagrams and tables for chimneys serving one heating appliance.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This draft European Standard specifies requirements and the basic performance criteria for chimneys, flue liners, connecting flue pipes, fittings and accessories, used to convey the products of combustion from combustion appliances to the outside atmosphere. This draft European Standard is to be used as a reference for all product standards of CEN/TC 166.
This draft European Standard specifies sootfire resistant chimneys, flue liners, connecting flue pipes, fittings and accessories for combustion appliances burning solid, liquid and gaseous fuels and non-sootfire resistant chimneys, flue liners, connecting flue pipes, fittings and accessories for combustion appliances burning liquid and gaseous fuels only. It also specifies sootfire safe accessories for combustion appliances burning solid, liquid and gaseous fuels.
NOTE 1   This means that chimneys, flue liners, connecting flue pipes, fittings and accessories designated "O" are not suitable for combustion appliances burning solid fuel.
This draft European Standard also identifies minimum requirements for marking, manufacturer's instructions, product information and provides guidance for the attestation and verification of constancy of performance (AVCP).
This draft European Standard does not apply to structurally independent chimneys and custom-built chimneys consisting of non-CE-marked components.
NOTE 2   This draft European Standard can be used as a basis for the specifications of products covered by a European Technical Assessment.
NOTE 3   All product standards drafted by Technical Committee CEN/TC 166 are based on the Mandate M/105.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    42 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the requirements and test methods for draught regulators and standstill opening devices that are used as components, carrying flue gases, in order to limit the draught in chimneys and provide secondary air to the chimney.
Draught regulators and standstill opening devices for positive pressure chimneys are not covered by this standard.
It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the requirements and test methods for electrically driven exhaust fans that are used as components to assist the evacuation of products of combustion from the chimney. It covers exhaust fans mounted on the top of the chimney, as a part of the chimney or between appliance and chimney.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard describes the method of specifying the design criteria and the installation method for building chimneys for room sealed appliances burning gas, used to convey the products of combustion from heating appliances to the outside atmosphere. It also
gives information on commissioning, cleaning and maintenance of an installed chimney. This standard also covers the design criteria and installation method for building air supply ducts for room sealed applications. This standard does not cover the design, installation, commissioning, cleaning and maintenance of chimneys designated H (high positive pressure chimneys). This standard does not cover the design, installation, commissioning, cleaning and maintenance of chimneys designated P serving more than one appliance.
This European Standard does not apply to structurally independent (free standing or selfsupporting) chimneys. This standard also specifies limitations for supporting a chimney, and the maximum unsupported chimney height for system chimneys and custom built chimneys.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day

D137/076: NWI approved by BT with target date for vote: 2012-03-31 * Will supersede EN 50379-1:2004

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

D137/076: NWI approved by BT with target date for vote: 2012-03-31 * Will supersede EN 50379-2:2004

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

D137/076: NWI approved by BT with target date for vote: 2012-03-31 * Will supersede EN 50379-3:2004

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard describes the method of specifying the design, installation criteria for system chimneys, construction of custom built chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys. This European Standard also deals with connecting flue pipes. This European Standard does not apply to freestanding chimneys covered by EN 13084-1. This European Standard excludes chimneys designated H (high positive pressure chimneys) and chimneys for room-sealed heating appliances. For the purpose of this European Standard the term "installation" includes construction.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies calculations for the dimensioning of Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) based upon the required nominal heat output of the stove as declared by the producer. The Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) are of individual one-off construction design. The standard can be used for log wood fired Kachelöfen (tile stoves) that burn one fuel load per storage period with a maximum load between 10 kg and 40 kg and a storage period (nominal heating time) between 8 h and 24 h.
This standard is valid for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) equipped with fireclay as interior material, with an apparent density between 1,750 kg/m³ and 2,200 kg/m³, a degree of porosity from 18 % up to 33 % by volume and a heat conductivity from 0,65 W/mK up to 0,90 W/mK (temperature range 20 °C to 400 °C).
This standard is valid for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) with sidewise combustion air supply of the combustion chamber and an inflow speed from 2 m/s to 4 m/s, whereas the height of the lowest opening is at least 5 cm above the bottom of the combustion chamber.
This standard is not valid for combinations with water heat exchangers for central heating or other heat absorbing elements like glass plates greater than 1/6 of the combustion chamber surface, open water tanks, etc. It is also not valid for combinations with heating/fireplace elements according to EN 13229. Furthermore this standard is not valid for mass-produced prefabricated or partly prefabricated slow heat release appliances according to EN 15250.
NOTE   Although for the purposes of this standard these calculations are applicable only to the requirements of this standard, the same calculations can be used for other purposes, e.g. to verify emission levels and energy efficiency in case of burning log wood or wood briquettes according to the producer’s manual.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the procedural steps to be taken in the preparation and application of a Sampling Plan. The Sampling Plan describes the method of collection of the laboratory sample necessary for meeting the objective of the testing programme. The principles or basic rules outlined in this European Standard, provide a framework that can be used by the project manager to:
   produce standardised Sampling Plans for use in regular or routine circumstances (elaboration of daughter/derived standards dedicated to well defined sampling scenarios);
   incorporate the specific sampling requirements of European and national legislation;
   design and develop a Sampling Plan for use on a case by case basis.
This European Standard has been developed for the characterization of waste.
There may be a need for more than one Sampling Plan to meet all the requirements of the testing programme. Ultimately the Sampling Plan provides the sampler with detailed instructions on how sampling should be carried out.
NOTE   Although this European Standard in most cases refers to the taking of one sample or increment or the preparation of one laboratory sample, it should be noted that often this should be more than one. For simplicity reasons this European Standard uses singular terms, while plural terms are also possible or even likely.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives guidance for the development of diagrams and tables which can be used to simplify the determination of the performance of chimneys serving one heating appliance in accordance with EN 13384-1. The diagrams and tables can be developed in order to assist in the design of a chimney configuration which is suitable for the desired application without undertaking the full calculation of
EN 13384-1.
This European Standard does not itself provide the diagrams and/or tables for use in the design of a chimney; it provides only the method to create these diagrams and tables.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day