93/68/EEC - Council Directive amending Dir. 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC and 73/23/EEC

DOP of 12 months

This European Standard EN 13819-2 specifies acoustic test methods for hearing protectors. The purpose of these tests is to enable assessment of the performance of the hearing protector as specified in the appropriate product standard.

This European Standard EN 13819-1 specifies physical test methods for hearing protectors. The purpose of these tests is to enable assessment of the performance of the hearing protector as specified in the appropriate product standard.

This European Standard is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

This European Standard is applicable to entertainment audio ear-muffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

This document specifies minimum performance requirements for protective clothing designed to be worn during firefighting activities. The requirements are detailed in this document covering heat and flame, mechanical, chemical, comfort, visibility, etc.
This document covers the general clothing design, the minimum performance levels of the material used, the methods of test to be used to determine these performance levels, marking and information supplied by the manufacturer.
This document make...view more

This European Standard specifies requirements and test methods applicable to ready-made garments, materials and seams of protective clothing against the influence of precipitation (e.g. rain, snowflakes), fog and ground humidity.

This European Standard specifies requirements and test methods applicable to ready-made garments, materials and seams of protective clothing against the influence of precipitation (e.g. rain, snowflakes), fog and ground humidity.

This European Standard specifies the minimum requirements for visors designed specifically to be used only with protective helmets, including but not limited to those conforming to EN 443, EN 14052, EN 16471 and EN 16473 as the situation dictates. These visors may be permanently fitted to, or removable from, the helmet. See the scope of the various helmet standards for applications.
These visors are not intended to protect against smoke and gas /vapour hazards.
Three types of visors in two for...view more

This European Standard specifies the minimum requirements for visors designed specifically to be used only with protective helmets, including but not limited to those conforming to EN 443, EN 14052, EN 16471 and EN 16473 as the situation dictates. These visors may be permanently fitted to, or removable from, the helmet. See the scope of the various helmet standards for applications.
These visors are not intended to protect against smoke and gas /vapour hazards.
Three types of visors in two for...view more

This International Standard covers performance requirements for ice hockey goalkeeper head and face protectors. It is to be used in conjunction with ISO 10256-1, 10256-2 and 10256-3.
The intent of this International Standard is to reduce the risk of injury to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.
Performance requirements are established, where appropriate for the following:
a) materials, assembly, and design;
b) protected areas (coverag...view more

This International Standard specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and shall be used in conjuction with ISO 10256-1.
Note 1   The requirements of a clause take precident over a figure.   
Note 2   The intent is to reduce the risk of injury to the face without compromising the form or appeal of the game.
Note 3   Ice hockey is a sport in which there is a risk of injury.  This International Standard is intended only for face protect...view more

This International Standard specifies performance requirements and test methods for head protectors for use in ice hockey and shall be used in conjunction with ISO 10256-1.
Note 1   The requirements of a clause take precident over a figure.   
Note 2   The intent of this International Standard is to reduce the risk of injury to the head without compromising the form or appeal of the game.
Note 3   Ice hockey is a sport in which there is a risk of injury.  This International Standard is intended only for...view more

ISO 10256-4:2016 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 10256‑1, ISO 10256‑2 and ISO 10256‑3.
Performance requirements are established, where appropriate for the following:
a) materials, assembly, and design;
b) protected areas (coverage) and penetration resistance;
c) shock absorption;
d) puck impact resistance;
e) retention;
f) optical quality.
NOTE 1 The requirements of a clau...view more

ISO 10256-3:2016 specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and is intended to be used in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a) construction and area of coverage;
b) resistance to puck impact;
c) penetration;
d) field of vision;
e) geometric (visual) optics and acuity;
f) transmittance and haze;
g) marking and information.
ISO ...view more

ISO 10256-2:2016 specifies performance requirements and test methods for head protectors for use in ice hockey and is intended to be read in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a) construction and protected area;
b) shock absorption;
c) penetration;
d) retention system properties;
e) field of vision;
f) marking and information.
ISO 10256-2:2016 applies to head protectors worn by
- players other th...view more

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one
or several building components.
This document specifies laboratory and field measurements of buildings for Type B elements (defined
in ISO 10848-1) when the junction has a substantial influence.
Laboratory measurements are used to quantify the performance of the junction with suppressed
flanking transmission from the laboratory structure. Field measurements are used to characterize
the in s...view more

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one
or several building components. These measurements are performed in a laboratory test facility or in
the field.
The performance of the building components is expressed either as an overall quantity for the
combination of elements and junction (such as the normalized flanking level difference and/or
normalized flanking impact sound pressure level) or as the vibration reduction index of a junc...view more

This European Standard specifies a method for determining the fire resistance of door and shutter assemblies and openable windows designed for installation within openings incorporated in vertical separating elements, such as:
a)   hinged and pivoted doors;
b)   horizontally sliding and vertically sliding doors including articulated sliding doors and sectional doors;
c)   folding doors, sliding folding doors /shutters;
d)   tilting doors;
e)   rolling shutter doors;
f)   openable windows;
g)   operable...view more

This European Standard specifies a method for determining the fire resistance of door and shutter assemblies and openable windows designed for installation within openings incorporated in vertical separating elements, such as:
a)   hinged and pivoted doors;
b)   horizontally sliding and vertically sliding doors including articulated sliding doors and sectional doors;
c)   folding doors, sliding folding doors /shutters;
d)   tilting doors;
e)   rolling shutter doors;
f)   openable windows;
g)   operable...view more

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one
or several building components. This document considers only laboratory measurements.
The measured quantities can be used to compare different products, or to express a requirement, or
as input data for prediction methods, such as ISO 12354-1 and ISO 12354-2. However, the measured
quantities Dn,f, Ln,f and Lne0,f only represent the performance with the dimensions for the test specimens
descr...view more

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. These measurements are performed in a laboratory test facility or in the field.
The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as the normalized flanking level difference and/or normalized flanking impact sound pressure level) or as the vibration reduction index of a junction...view more

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components.
ISO 10848-3:2017 specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848‑1) when the junction has a substantial influence.
Laboratory measurements are used to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in si...view more

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. This document considers only laboratory measurements.
The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354‑1 and ISO 12354‑2. However, the measured quantities Dn,f, Ln,f and Lne0,f only represent the performance with the dimensions for the test specimens described...view more

This document specifies methods for the calculation of the thermal transmittance of windows and
pedestrian doors consisting of glazed and/or opaque panels fitted in a frame, with and without shutters.
This document allows for
— different types of glazing (glass or plastic; single or multiple glazing; with or without low emissivity
coatings, and with spaces filled with air or other gases),
— opaque panels within the window or door,
— various types of frames (wood, plastic, metallic with and...view more

ISO 10077-1:2017 specifies methods for the calculation of the thermal transmittance of windows and pedestrian doors consisting of glazed and/or opaque panels fitted in a frame, with and without shutters.

This part of ISO 10256 specifies general requirements for head, face, neck and body protectors
(hereafter referred to as protectors) for use in ice hockey.
This part of ISO 10256 is intended only for protectors used for ice hockey. Requirements are given for
the following:
a) terms and definitions;
b) innocuousness;
c) ergonomics;
d) test report;
e) permanent markings;
f) information for users.
In the ISO 10256 series, collateral standards specify performance requirements for protector...view more

ISO 10256-1:2016 is part of ISO 10256 specifies general requirements for head, face, neck and body protectors (hereafter referred to as protectors) for use in ice hockey.
ISO 10256-1:2016 is intended only for protectors used for ice hockey. Requirements are given for the following:
a) terms and definitions;
b) innocuousness;
c) ergonomics;
d) test report;
e) permanent markings;
f) information for users.
In the ISO 10256 series, collateral standards specify performance requirements for pr...view more

This part of ISO 10140 specifies test requirements for building elements and products, including
detailed requirements for preparation, mounting, operating and test conditions, as well as applicable
quantities and additional test information for reporting. The general procedures for airborne and
impact sound insulation measurements are given in ISO 10140-2 and ISO 10140-3, respectively.

ISO 10140-1:2016 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information for reporting. The general procedures for airborne and impact sound insulation measurements are given in ISO 10140-2 and ISO 10140-3, respectively.

This document gives recommendations for the selection, use, care and maintenance of hearing protectors.

This document gives recommendations for the selection, use, care and maintenance of hearing protectors.

CCMC mistake: editorial correction in Table 6 in the English version

CCMC mistake: editorial correction in Table 6 in the English version

EN ISO 20346 specifies basic and additional (optional) requirements for protective footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour. Special risks are covered by complementary job-related standards (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and molten metal splash, protection for motor cycle riders).

ISO 20346:2014 specifies basic and additional (optional) requirements for protective footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour.
Special risks are covered by complementary job-related standards (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and molten metal splash, protection for motor cycle riders).

This European Standard specifies minimum requirements for self-contained re-breathing diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to the following: - a maximum depth of 6 m for apparatus using pure oxygen; - a maximum depth of 40 m for apparatus using oxygen in nitrogen gas mixtures; - a maximum depth of 100 m for apparatus using oxygen and helium or oxygen, nitrogen and helium gas mixtures; - water temperatures from 4 °C to 34 °C or outside these te...view more

This European Standard specifies minimum requirements for self-contained re-breathing diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to the following:
-   a maximum depth of 6 m for apparatus using pure oxygen;
-   a maximum depth of 40 m for apparatus using oxygen in nitrogen gas mixtures;
-   a maximum depth of 100 m for apparatus using oxygen and helium or oxygen, nitrogen and helium gas mixtures;
-   water temperatures from 4 °C to 34 °C or outside thes...view more

This International Standard specifies requirements for high-visibility clothing which is capable of signalling the user's presence visually, intended to provide conspicuity of the user in high-risk situations under any light conditions by day and under illumination by vehicle headlights in the dark. For further information concerning risk situations see Annex A. This standard does not apply to medium-risk and low-risk situations Performance requirements are included for colour and retroreflectio...view more

ISO 20471:2013 specifies requirements for high visibility clothing which is capable of visually signalling the user's presence. The high visibility clothing is intended to provide conspicuity of the wearer in any light condition when viewed by operators of vehicles or other mechanized equipment during daylight conditions and under illumination of headlights in the dark.
Performance requirements are included for colour and retroreflection as well as for the minimum areas and for the placement o...view more

This part of ISO 15027 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection. It is applicable for dry and wet abandonment suits. Constant wear suits are not covered by this part of ISO 15027. The requirements of constant wear suits are given in ISO 15027-1:2012. Test methods ar...view more

This part of ISO 15027 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits. Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for abandonment suits are given in ISO 15027‑2:2012.

This part of ISO 15027 specifies performance and safety requirements for constant wear immersion suits for work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia. It is applicable for dry and wet constant wear immersion suits. Abandonment suits are not covered by this part of ISO 15027. Requirements for abandonment suits are given in ISO 15027-2:2012. Test methods for immersion suits are given in ISO 15027-3:2012.

ISO 15027-2:2012 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection.
It is applicable for dry and wet abandonment suits.
Constant wear suits are not covered by ISO 15027-2:2012. The requirements of constant wear suits are given in ISO 15027-1. Test methods are given in ISO ...view more

ISO 15027-3:2012 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits.
Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for abandonment suits are given in ISO 15027-2:2012.

ISO 15027-1:2012 specifies performance and safety requirements for constant wear immersion suits for work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia.
It is applicable for dry and wet constant wear immersion suits.
Abandonment suits are not covered by ISO 15027-1:2012. Requirements for abandonment suits are given in ISO 15027-2. Test methods for immersion suits are given in ISO 15027-3.

To modify requirements for personal protective occupational footwear

This standard specifies minimum requirements and test methods for the performance of three types of footwear for use by firefighters for general-purpose rescue, fire rescue and hazardous materials emergencies.
This standard does not cover special personal protective equipment used in high-risk situations (for example, the conditions described in ISO 15538).