This document specifies the methodology and procedure for determining the presence and minimization of other dangerous substances in relation with Annex II Para 1 Indent 3 of Directive 94/62/EC. This document is intended to be of practical use, and to enable efficient application of Directive 94/62/EC, even for small and medium-sized companies in the packaging industry, providing them with a methodology for assessing compliance with the Directive.
This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

  • Technical report
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the methodology and procedure for determining the presence and minimization of other dangerous substances in relation with Annex II Para 1 Indent 3 of Directive 94/62/EC. This document is intended to be of practical use, and to enable efficient application of Directive 94/62/EC, even for small and medium-sized companies in the packaging industry, providing them with a methodology for assessing compliance with the Directive.
This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

  • Technical report
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Report establishes a set of best practice guidelines for undertaking those aspects of life cycle assessment specific to packaging and distribution systems.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Report establishes a set of best practice guidelines for undertaking those aspects of life cycle assessment specific to packaging and distribution systems.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the principal existing processes for material recycling and their inter-relationship. Both packaging and recovery technologies are subject to continuing and rapid development. This standard describes the present stage of knowledge but may be subject to modifications in the light of new developments. The essential relationship between this and the four other (mandated) European Packaging Standards and one (mandated) CEN Report is specified in the standard prEN 261265.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and a procedure by which a person or organization responsible for placing packaging or packed product on the market (the supplier) may combine the application of five (mandated) packaging standards and one (mandated) CEN report (in two parts).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for a packaging to be classified as recoverable in the form of energy and sets out procedures for assessment of conformity with those requirements. The scope is limited to factors under the control of the supplier.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a procedure for assessment of packaging to ensure that the weight and/or volume of its material content is at the minimum commensurate with the maintenance of :
-functionality throughout the supply and user chain ;
-safety and hygiene for both product and user/consumer ;
-acceptability of the packed product to the user/consumer.
This European Standard also specifies the methodology and procedure for determining the presence of the four heavy metals named in article 11 of the packaging and packaging waste Directive 94/62/EC and for determining the presence and minimisation of any dangerous substances or preparations if they are present in packaging and are likely to be released into the environment as a result of waste management operations. The procedures are referenced in CR 13695-1 and CR 13695-2.
NOTE   The substitution of one packaging material by another is not a basis for source reduction.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a procedure for assessment of packaging to ensure that the weight and/or volume of its material content is at the minimum commensurate with the maintenance of :
-functionality throughout the supply and user chain ;
-safety and hygiene for both product and user/consumer ;
-acceptability of the packed product to the user/consumer.
This European Standard also specifies the methodology and procedure for determining the presence of the four heavy metals named in article 11 of the packaging and packaging waste Directive 94/62/EC and for determining the presence and minimisation of any dangerous substances or preparations if they are present in packaging and are likely to be released into the environment as a result of waste management operations. The procedures are referenced in CR 13695-1 and CR 13695-2.
NOTE   The substitution of one packaging material by another is not a basis for source reduction.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for a packaging to be classified as recoverable in the form of energy and sets out procedures for assessment of conformity with those requirements. The scope is limited to factors under the control of the supplier.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and a procedure by which a person or organization responsible for placing packaging or packed product on the market (the supplier) may combine the application of five (mandated) packaging standards and one (mandated) CEN report (in two parts).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines a method for the calculation of the rate of energy recovery of combustible packaging waste.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the principal existing processes for material recycling and their inter-relationship. Both packaging and recovery technologies are subject to continuing and rapid development. This standard describes the present stage of knowledge but may be subject to modifications in the light of new developments. The essential relationship between this and the four other (mandated) European Packaging Standards and one (mandated) CEN Report is specified in the standard prEN 261265.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This draft European Standard establishes a methodology for the calculation of the rate of recycling of packaging and packaging material. Note: The packaging supply chain also use other ratios in the management of their operations. The flow diagrams used in the methodology set out in this draft Standard can be used in the evaluation of such other ratios and examples are given.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Migrated from Progress Sheet (TC Comment) (2000-07-10): Stage 32: see comments under WI 00261074. SPPJ_24_Y_199812 ++ SPP update 1997-10-08. SPP update 1998-04-28.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a method for the evaluation of the ultimate aerobic biodegradability of packaging materials based on organic compounds under controlled composting conditions by measurement of released carbon dioxide at the end of the test. This method is designed to resemble typical aerobic composting conditions for the organic fraction of mixed municipal solid waste. The packaging material is exposed in a laboratory test to an inoculum which is derived from compost. The aerobic composting takes place in an environment where especially temperature, aeration and humidity are closely monitored and controlled. The test method is designed to yield a percentage and rate of conversion of carbon of the test material to released carbon dioxide.
The conditions described in this European Standard do not necessarily always correspond to the optimal conditions allowing the maximum degree of biodegradation to occur.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is used to evaluate the disintegration of packaging materials in a pilot-scale aerobic composting test under defined conditions. Other methods should be used to measure the biodegradability of the packaging materials. Packaging materials are mixed with biowaste and spontaneously composted for 12 weeks in practical oriented composting conditions. At the end of the composting cycle the disintegration is measured by sieving of the compost and the calculation of a mass balance. The influence of the tested sample on the quality of the compost can be be studied by using the compost obtained at the end of the composting process for further measurements such as chemical analyses and ecotoxicity tests.
Additionally this method can be used for visual perception and photographic documentation of the disintegration of packaging materials and for evaluating the effect of their addition on the composting process.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Migrated from Progress Sheet (TC Comment) (2000-07-10): Stage 32: See comments under WI 00261074. SPPJ_24_Y_199812 ++ SPP update 1997-10-08. SPP update 1998-04-28.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines a method for the calculation of the rate of energy recovery of combustible packaging waste.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This draft European Standard establishes a methodology for the calculation of the rate of recycling of packaging and packaging material. Note: The packaging supply chain also use other ratios in the management of their operations. The flow diagrams used in the methodology set out in this draft Standard can be used in the evaluation of such other ratios and examples are given.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a method for the evaluation of the ultimate aerobic biodegradability of packaging materials based on organic compounds under controlled composting conditions by measurement of released carbon dioxide at the end of the test. This method is designed to resemble typical aerobic composting conditions for the organic fraction of mixed municipal solid waste. The packaging material is exposed in a laboratory test to an inoculum which is derived from compost. The aerobic composting takes place in an environment where especially temperature, aeration and humidity are closely monitored and controlled. The test method is designed to yield a percentage and rate of conversion of carbon of the test material to released carbon dioxide.
The conditions described in this European Standard do not necessarily always correspond to the optimal conditions allowing the maximum degree of biodegradation to occur.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is used to evaluate the disintegration of packaging materials in a pilot-scale aerobic composting test under defined conditions. Other methods should be used to measure the biodegradability of the packaging materials. Packaging materials are mixed with biowaste and spontaneously composted for 12 weeks in practical oriented composting conditions. At the end of the composting cycle the disintegration is measured by sieving of the compost and the calculation of a mass balance. The influence of the tested sample on the quality of the compost can be be studied by using the compost obtained at the end of the composting process for further measurements such as chemical analyses and ecotoxicity tests.
Additionally this method can be used for visual perception and photographic documentation of the disintegration of packaging materials and for evaluating the effect of their addition on the composting process.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies a method to evaluate the ultimate biodegradability of packaging materials and its constituents by measurement of O2-consumption.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies a method to evaluate the ultimate biodegradability of packaging materials and its constituents by measurement of CO2 evolution.

  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This CEN report examines the marking of packaging and the identification of packaging material as described in article 8 of the packaging and packaging waste Directive 94/62/EC, the supporting Decision and the proposal for a Directive on Marking and makes recommendations based on article 10 of that Directive 94/62/EC.

  • Standardization document
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This CEN report examines the marking of packaging and the identification of packaging material as described in article 8 of the packaging and packaging waste Directive 94/62/EC, the supporting Decision and the proposal for a Directive on Marking and makes recommendations based on article 10 of that Directive 94/62/EC.

  • Standardization document
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The objective of this report is to identify and define properties of packaging and packaging waste to allow optimization of energy recovery.
This report takes a wide approach to the process of energy recovery in order to identify the items to be standardised according to the Directive and the Mandate.

  • Standardization document
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The objective of this report is to identify and define properties of packaging and packaging waste to allow optimization of energy recovery.
This report takes a wide approach to the process of energy recovery in order to identify the items to be standardised according to the Directive and the Mandate.

  • Standardization document
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part 1 of the report is related to the four heavy metals specified in Art. 11 of the Directive: lead, cadmium, chromium (VI) and mercury. A second part of this CEN-report is related to the need to assess other dangerous substances present in packaging.

  • Technical report
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Migrated from Progress Sheet (TC Comment) (2000-07-10): Stage 32: see comments under WI 00261074. ++ Will be a CR (Res BTS6 C 3/1994) (CC/980223) + Res BT C 238/1998 (CC/990104) ++ SPP update 1998-04-28.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines terms used in the field of Packaging and the Environment.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and procedures to determine the compostability and anaerobic treatability of packaging and packaging materials by addressing four characteristics: 1) biodegradability; 2) disintegration during biological treatment; 3) effect on the biological treatment process; 4) effect on the quality of the resulting compost. In case of a packaging formed by different components, some of which are compostable and some other not, the packaging itself, as a whole is not compostable.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and procedures to determine the compostability and anaerobic treatability of packaging and packaging materials by addressing four characteristics: 1) biodegradability; 2) disintegration during biological treatment; 3) effect on the biological treatment process; 4) effect on the quality of the resulting compost. In case of a packaging formed by different components, some of which are compostable and some other not, the packaging itself, as a whole is not compostable.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines terms used in the field of Packaging and the Environment.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Report addresses the criteria for a minimum content of recycled material in packaging for appropriate types of packaging, and deals with the criteria that will influence the acceptable level of recycled material and the methodology by which such content can be monitored.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part 1 of the report is related to the four heavy metals specified in Art. 11 of the Directive: lead, cadmium, chromium (VI) and mercury. A second part of this CEN-report is related to the need to assess other dangerous substances present in packaging.

  • Technical report
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Migrated from Progress Sheet (TC Comment) (2000-07-10): CEN Report

  • Standardization document
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

No scope available

  • Standardization document
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

No scope available

  • Standardization document
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

No scope available

  • Standardization document
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a testing scheme and requirements for the designation of carrier bags of any materials that are considered to be suitable for the incorporation into well-managed home composting installations run by householders for personal uses. Carrier bags are considered as suitable for home composting only if all the individual components meet the requirements.
The following five aspects are addressed:
a)   characterization;
b)   biodegradation;
c)   disintegration during home composting;
d)   compost quality;
e)   recognizability.
The first four aspects (a) to d)) are assessing the effects on the biological treatment process and the compost made by it. The fifth aspect ensures the recognizability of home compostable carrier bags by the end user.
This document forms the basis for the labelling of carrier bags of any material that are considered to be suitable for the incorporation into well-managed home composting installations.
NOTE 1   Compliance with the requirements of this document by the carrier bags entering the compost does not necessarily imply that a high-quality compost will be produced.
This document covers the home compostability of the carrier bags themselves but does not address regulations that may exist regarding the home compostability of any residual contents.
The testing scheme and the requirements specified by this document do not apply to worm composting and/or industrial composting.
It does not provide information on the biodegradability of carrier bags ending up in the environment as litter.
This document includes a reference to guides to well-managed home composting (Annex E).
Compost produced by a private individual is for his own use and not for provision to others, free of charge or in return for payment. This document has no value as a marketing authorization or authorization of use of the final compost.
NOTE 2   The testing scheme and evaluation criteria could be the basis for the establishment of suitability to home composting of other products.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a testing scheme and requirements for the designation of carrier bags of any materials that are considered to be suitable for the incorporation into well-managed home composting installations run by householders for personal uses. Carrier bags are considered as suitable for home composting only if all the individual components meet the requirements.
The following five aspects are addressed:
a)   characterization;
b)   biodegradation;
c)   disintegration during home composting;
d)   compost quality;
e)   recognizability.
The first four aspects (a) to d)) are assessing the effects on the biological treatment process and the compost made by it. The fifth aspect ensures the recognizability of home compostable carrier bags by the end user.
This document forms the basis for the labelling of carrier bags of any material that are considered to be suitable for the incorporation into well-managed home composting installations.
NOTE 1   Compliance with the requirements of this document by the carrier bags entering the compost does not necessarily imply that a high-quality compost will be produced.
This document covers the home compostability of the carrier bags themselves but does not address regulations that may exist regarding the home compostability of any residual contents.
The testing scheme and the requirements specified by this document do not apply to worm composting and/or industrial composting.
It does not provide information on the biodegradability of carrier bags ending up in the environment as litter.
This document includes a reference to guides to well-managed home composting (Annex E).
Compost produced by a private individual is for his own use and not for provision to others, free of charge or in return for payment. This document has no value as a marketing authorization or authorization of use of the final compost.
NOTE 2   The testing scheme and evaluation criteria could be the basis for the establishment of suitability to home composting of other products.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the methodology and procedure for determining the presence and minimisation of other dangerous substances in relation with Annex II Para 1 Indent 3 of Directive 94/62/EC. This document is intended to be of practical use, and to enable efficient application of the Directive 94/62/EC, even for small and medium sized companies in the packaging industry, providing them with a methodology for assessing compliance with the Directive.
This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

  • Technical report
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the methodology and procedure for determining the presence and minimisation of other dangerous substances in relation with Annex II Para 1 Indent 3 of Directive 94/62/EC. This document is intended to be of practical use, and to enable efficient application of the Directive 94/62/EC, even for small and medium sized companies in the packaging industry, providing them with a methodology for assessing compliance with the Directive.
This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427.

  • Technical report
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This laboratory scale test method using synthetic waste aims at simulating the environmental conditions found in industrial composting plants. Packaging materials exposed to this environment can be preliminary assessed for disintegrability. A negative result does not necessarily mean that the test material is not disintegrating under industrial composting conditions. This test does not replace the acceptance disintegration test as specified in EN 14045, in accordance with EN 13432.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day